Summit FFAR10SSTBLOCKER User Manual

LLF2 Combination Cam Lock Instructions

Use a screwdriver or other tool to push down and hold the reset

Turn the key 90 degrees to unlock. If the key is used to unlock,

reset button

or other tool

LLF2 combination
lock installed

I. Manufacturer’s combination

The manufacturer has set the combination code at 0-0-0-0.

II. Resetting the combination

a. Make sure the digit wheels are set at the correct code so that

the housing turns freely. The cam should be engaged so that
the doors of the appliance cannot open.

b.

button until you have entered your new code. (Fig. 1)

c. Turn the four digit wheels to your new combination code, then

release the reset button.

d. Make sure the housing is able to turn freely at the new setting.

Code setting is complete.

III. To lock

While the lock is in the unlocked position (i.e., the housing can be

turned by hand), randomly set the digit wheels to lock. (Fig. 2)

IV. To unlock

Turn the digit wheels to the correct code to unlock. (Fig. 3)

V. Use key to unlock

You can use the key to unlock if you forget the combination.

a. Insert key into the barrel. (Fig. 4)
b.

the cam will also turn 90 degrees when the key is rotated.
However, the digit wheels will not rotate.

PARTS

barrel

digit wheel

screwdriver

Randomize the
digit wheels

housing

Fig. 1

Fig. 4

Fig. 5

Fig. 2

Fig. 3

cam