Summer Infant 962R Users Manual

USING THE HANDHELD (continued) 3

Nightlight

Press the nightlight button on the

handheld to activate the soft glow

nightlight on the camera. The light

will glow blue. Blue light acts as a

soothing soft glow nightlight.

Nightlights are comforting to little

ones, especially toddlers who

become scared in a pitch black

room.

The nightlight can be turned
on or off from the camera
by pressing the
ON/OFF/Nightlight button.

Press the nightlight button again to change the nightlight color to red.

Red light helps soothe infants to sleep. This color is prominent in the

sunset, natures very own way of telling your little one it’s time to go to

sleep. An added bonus: young baby’s find red light soothing as it is a

familiar color to them– it’s the only color light your baby was able to see

in the womb.

Zoom

Press the zoom button to toggle

between No zoom, zoom 1x, zoom

2x and zoom 3x. The zoom level is

indicated as an icon on the

top-right hand corner.

Talk-back

Press and hold the talk-back button to activate the talk-back feature.

Release the button to end talk-back mode.

Split/Quad Screen Viewing

Press the Split/Quad Screen button
to view more than one room at once.
Audio is only transmitted from one room
in this mode. Manually press left/right or
up/down arrow buttons to hear other
rooms. The room with the audio will
have a blue box around it.
Note: Zoom and Pan/Tilt are not
accessible while in split-screen mode.
Press camera control button to exit
Split/Quad screen mode.

Sound Activated Lights

The LED light bar on the top of the

handheld will light up as it picks up

noises. Softer sounds will light up

the amber LEDs. Louder noises will

light up the red LEDs.

Video On/Off

Turn off the handheld’s video by

pressing the VIDEO button. The

screen will go dark. This feature

allows you to preserve battery life

when not plugged into A/C

adapter. The audio feature will

remain activated allowing you to

monitor sounds. Press the button

again to resume video monitoring.

Adjusting Brightness

Adjust the handheld screen

brightness by pressing the

“POWER/MENU ” button, and

brightness is selected from the

menu. Use the left and right

arrow buttons to adjust the

brightness.

/MENU

/MENU

BRIGHTNESS

SCAN

VIEW CAM

DELETE CAM

ADD CAM

BRIGHTNESS

SCAN

VIEW CAM

DELETE CAM

ADD CAM

Selecting Camera to View

Step 1: Power on the Handheld and press the “POWER/MENU ” button.

Step 2: Using the “DOWN ” button, select “View Cam”.

Step 3: Use the “LEFT /RIGHT ” buttons to select an available

camera (blue color indicates powered-on, within-range, or paired

cameras).

Step 4: Press “CAMER CONTROL ” button to confirm selection.

/MENU

Step 5: The video will appear on the handheld screen.

Scanning Camera

Step 1: Power on the Handheld and press the “POWER/MENU ” button.

Step 2: Using the “DOWN ” button, select “SCAN” and press

“CAMER CONTROL ” button.

Step 3: Scanning cameras will begin, it will cycle through each active

camera every 8 seconds.

Step 4: To stop scanning, press the “POWER/MENU ” button.

For understanding additional Menu features including: delete camera, and add camera,
plese refer to the user’s guide.

Summer Infant, Inc. 1275 Park East Drive Woonsocket, RI 02895 1 800 268-6237 11/16

/MENU

/MENU

QUICK START GUIDE

FCC Caution:

Any Changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment .This equipment should be installed and operated with

minimum distance 20cm between the radiator& your body.

This transmitter must not be co-located or operating in conjunction with any other antenna or

transmitter.

ISEDC Warning

This device complies with Innovation, Science, and Economic Development Canada

licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired

operation of the device.

Le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement

économique Canada applicables aux appareils radio exempts de licence. L'exploitation est

autorisée aux deux conditions suivantes :

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le

brouillage est susceptible d'en compromettre le fonctionnement

The device is compliance with RF exposure guidelines, users can obtain Canadian information on RF

exposure and compliance.The minimum distance from body to use the device is 20cm.

Le présent appareil est conforme

Après examen de ce matériel aux conformité ou aux limites d’intensité de champ RF,

les utilisateurs peuvent sur l’exposition aux radiofréquences et la conformité and compliance d’acquérir

les informations correspondantes. La distance minimale du corps à utiliser le dispositif est de 20cm.