Please read this manual thoroughly and keep in your vehicle for easy future reference.
We highly recommend that you find a licensed professional installer for the installation of
this product, it is illegal to watch DVD player while driving.
CAUTION: This unit is a class 1 Laser Product. To prevent direct exposure to Laser
system, DO NOT OPEN the unit. The Laser Beam may hurt or damage your eyes. If the
unit requires adjustments, please contact Sumas Media.
USE THIS PRODUCT SAFELY
Make sure you fully understand the following safety information:
When Driving
Keep the unit at an appropriate sound level. Driving with the sound at a level that
prevents you from hearing the sounds outside and around the car may cause an
accident.
When cleaning your interior
Do not expose the product to any type of liquid or excessive moisture. This could cause
short circuit, fire or other severe damage to the unit or you vehicle.
When Parked
Parking in direct sunlight, especially in the summer time can produce very high
temperature inside you vehicle. This may cause the unit to not work properly. Let the
interior of your car to cool down before turning on the unit.
Note:
Do not use or store player in dusty, high temperature or high humidity environments.
Park wire/Brake wire
Park wire is to connect to your parking brake (Hand brake) or your unit will not function,
also for your safety; when car is operate will restrict you to play/watch DVD while driving,
display shows: safety off, do not play DVD,
But some make or model of automobile if you have problem to connect to your brake,
you can also ground this wire to your car’s chassis, unit will play; but restriction will be
disabled, so please do not watch your unit when driving!
Replacing the Fuse
When replacing the fuse, be sure to use one matching the amperage rating stated on
the original fuse.
WARNING!
NEVER replace any Fuse with one of
a higher
supplied.
fuse
and/or
rating value than the fuse
Using a higher current rated
may cause damage to your unit
your vehicle’s electrical wiring.
1
INSTALLATION
o This unit is designed for 12V DC, (connecting to other than 12V unit will be damage)
negative ground operation system only.
o The negative battery terminal must be disconnected before making connections,
which can reduce damaging the unit due to short circuit.
o Be sure to connect the color coded leads correctly according to the wiring diagram.
Incorrect connections may cause damage or malfunction and may damage the
vehicle’s electrical system.
o Be sure to connect the speaker (-) leads to the speaker (-) terminal, and the speaker
(+) leads to the speaker (+) speaker terminal and so on. Never connect the left and
right channel speaker cables to each other or to the vehicle body.
o Do not block the vents or heat sink panels. Blocking them will cause heat to build up
inside and may damage your unit.
o After the completion of the installation. Plug in negative cable of vehicle to the (-)
battery terminal. Start your vehicle and test the unit, before finalizing the install.
Unit Installation & Removal
Unit Reset
Replacing Remote Cont rol Battery
* When the range of the operation of the remote control becomes short or none functional at all. Replace
battery with a new button cell. Make sure to purchase the same size battery.
the
1. Pull out the
Battery Holder while
pressing the stopper.
2. Put the button-type
battery (+) mark
upward into the
3. Insert the Battery
Holder into the
Remote Control.
battery holder.
2
Playable Media
DVD, Video CD and CD discs that display the logos shown below can be played back on this unit.
DVD video disc region numbers:
(This unit is for region one only)
If you use an irregular disc it may jam the DVD player or not play, for this reason only use round discs
Be sure to check all discs for cracks and scratches before playing, discs in those conditions will not play
properly.
Also, be sure to avoid touching the recorded (plain) side of the disk.
Store Disc’s in a case when not in use to avoid scratching the disc.
Keep discs out of direct sunlight (it will cause them to warp and crack).
To clean the Disc’s wiped with a soft cloth from the inside of the disc outward.
MP3’s
MP3 files on CD-ROM, CD-R/RW, DVDR/RW, USB Flash Drives, and SD cards are compatible with this unit.
maximum character width of the folder name is 32. Only 32 characters will be displayed. While
The
playing discs with MP3 and CD-DA, such as CD EXTRA and MIXED MODE CD the system can only switch
between MP3 and CD-DA. The tone of MP3s file can usually be bettered when the bit rate is increased.
This machine can play recordings between 8KBPS and 320 KBPS. However, in order to enjoy a good tone, we
recommend discs over 128KBPS.
!!!!!IMPORTANT!!!!!
While naming an MP3 file, add relevant extending name .mp3.
This unit will play files with .mp3 as MP3; DO NOT use this extending name on none mp3 files to avoid
problems.
Picture Files
JPEG Pictures stored in CD-R/RW, DVD-R/RW, USB Flash drives and SD Cards can be viewed with this unit.
Bigger
file sizes may take long to load.
Video Files
This unit supports the following video files DVIX, AVI, MPEG-1 and MPEG-2. Bigger file size may take
to
load.
longer
3
Remote Control
4
REMOTE CONTROL FUNCTIONS
1. PWR: Power (on/off)
SUB-T/REC: Language subtitle (on/off)
MUTE: Mute enable/disable sound
SRC: To switch between modes
2. BND: To select different bands (radio mode)
APS: Automatic scan/program (radio mode)
ST: Stereo/Mono switch (radio mode)
3. : Play/Pause
: Stop
Title: Title Menu
Enter: Confirm/play
: Directional buttons
Blank: No use
4. : Phone call pick-up/send/ring on
OSD: Screen info Display
: End phone call/ring off
5. 0-9: Number buttons for dialing phone calls
*/10+: To enter number over 10 (skipping chapters/tracks)
RO/RS: Not active
6. AF: Searches Alternate Frequencies Stations automatically
TA: Traffic Announcement (Broadcast)
PTY: Program Style (Type or Genre)
7. : Skip forward/next chapter/track
: Previous/last chapter/track
: Increase/decrease volume
SEL: System settings
CLK: Clock display button
EQ: Preset sound effects (equalizer)
R.L/Language: Left/Right soundtrack switch dialogue language
Blank: No function
5
TOUCH PANEL
1. VOL/SRC/PWR Button
2. MIC
3. Rewind/Last Chapter
4. Skip Forward/Next Chapter
5. IR Remote Control Receiver
6. SD Card Slot
7. Disc Slot
8. Mute/Answer
9. Band/Random
10. Bluetooth Button (BT)
11. Eject
12. AUX In (audio only)
13. USB Port
14. Reset Button
15.
LCD Open/Close
16. ADJ – Angel Adjust
17. LCD Touch Screen
18. RPT/ST – Repeat/Sound Track
19. Stop/Clock
6
(
1.
VOL/SRC/PWR
2.
MIC
– Use when on a phone call in Bluetooth mode.
3.
- Rewind/Go Back/Last Track or Chapter/Reverse seek for radio stations
4.
- Fast Forward/Skip Track or Chapter/Forward seek for radio stations
5.
Infrared sensor
6.
SD Card Slot
7.
Disc Slot
– For inserting CD/DVD/MP3/VCD discs.
8.
Mute/Answer Button
9.
Band
– Selecting Between FM1, FM2, FM3, AM1, AM2/Random play
10.
Bluetooth (BT)
11.
Eject
– Press to Eject inserted Disc
12.
AUX IN
– Auxiliary input for external devices (MP3 Players).
13.
USB Port
– To play media in a USB Flash drive/MP3 Players.
14.
Reset
– To reset all functions and setting to factory default.
15.
OPEN/CLOSE
16.
Adjust Angel
17.
LCD Touch Screen
18.
Repeat/Soundtrack
19.
Stop/Clock –
Key Functions
- Press to power ON/Press and hold to power OFF/Rotate to adjust Volume.
- Remote control signal receiver. (DO NOT BLOCK)
– Secure Digital Memory Card slot
)
– Press to activate Bluetooth mode directly
– To Open and Close LCD Screen.
(ADJ
) – To adjust viewing angel of the screen.
– 7” LCD Touch Screen
– Repeat on/off for track/chapter/folder/
To STOP play/Show clock on Radio and Input mode.
– To Disable and Enable sound/Answer phone calls
7
Radio
On “
Touch Functions
Radio
” mode, ALL functions on the screen are touchable. Simply touch to use.
Touch Function Operation
Bluetooth Touch Functions
On Bluetooth Mode, All displayed functions are touchable. Simply touch to use.
DVD/VCD Touch Functions
On DVD/VCD mode, Sub-menu will appear when screen is touched.
8
Touch Function Operation cont.
MP3/Music CD/SD/USB Touch Functions
On MP3/Music CD mode, Sub-menu will appear when screen is touched.
PHOTO VIEWING Touch Functions
On Photo viewing, Sub-menu will appear when screen is touched.
MediaPlayerMenu
9
ON/OFF
To turn unit on press
When
Note: Unit will resume last mode it was in.
Opening LCD Screen
Press
Note: the screen will automatically retract when the unit is powered off.
“SRC”
using the remote just press “
once, to turn unit off press and hold “
once to open screen, press again to close.
Adjusting Screen Angles
Basic Operation
PWR
” once to turn unit ON/OFF.
SRC
” button for 3 seconds.
To adjust screen angle, press “
ADJ
” button on the unit repeatedly,
until the desired angle is reached. (Press 1x-3x to tilt down, 1x-3x to tilt back up)
Changing Modes
To change mode press “
main
menu, then touch the desired mode.
Note: Disc, SD, and USB will not activate when there is no media inserted.
Basic Setup
To turn “
BEEP
or in the Main menu to go to setup screen.
Touch “
of the screen.
Basic
” then select from
Audio and Video Setup
SRC
” on the unit or touch Return/ESC
” ON/OFF or to adjust “
BEEP,
Clock
or
CLOCK
”, touch “
. To change settings touch +/- on the right side
Setup
on
the screen to go to the
” on the screen while in Radio mode
To adjust the “
or in the Main menu to go to setup screen.
For example: To change bass level, simply touch
Audio
” and “
Video
” settings, touch “
Audio
Setup
then touch
” on the screen while in Radio mode
BASS
and touch +/- to
adjust to the desired setting. Repeat these steps to adjust the following: Treble, Balance, Fader,
EQ,
System Setup
While on “
SETUP
Using the arrow keys (
DISC
on the screen.
”, “
SD”
, or “
▲▼◄►) on
USB
” mode press
the remote, press ▼ to change the settings on the following;
SETUP
TV SYSTEM, TV TYPE, PASSWORD, RATING, and DEFAULT.
Brightness, Color, Contrast, Tint and VMODE (Preset settings).
For example: To change
► choose from
NTSC
Repeat these steps for all other settings.
TV System
,
PAL
or
AUTO
, select
and press enter to confirm selection.
TV SYSTEM
10
on the remote, to bring out SYSTEM
on the screen and press the right arrow
Bluetooth Operation
Pairing/ link your cell phone
- Select “
Or by pressing the “BT” button on the unit.
- Turn on Bluetooth on your cell phone; select either
“Pair
Display
Code,
Bluetooth
” from the main menu by touching the icon
Touch
“ON/OFF”
(Unit will display “Pairing”).
or
link with Device”
as
“Car Kit”
enter “0000” then press “Accept”,
You can now make and receive phone call through your car DVD player
*Note: Some phones will have a feature that allow the car DVD to connect
. Press
Once pairing completed both devices will say connected.
To your cell phone automatically without a security code.
. Once your cell phone has done searching, the car DVD should
“Connect”
on the screen
or
“OK”
“Search Audio Enhancement”
on your cell phone, when asked for a security
or
Incoming phone calls
- Once paired, when you are in your car with your cell phone and car DVD isn’t turned on; when
Calls
come in, unit will automatically turn on for you, and then you can simply pick up this
Incoming
** When calls come in while you’re on the phone using Bluetooth, please be aware Bluetooth does not
Have call waiting display feature, and this is how it actually works:
call from the unit.
- While on the phone and another call comes in, you will hear 2 short soft beeps, as an alert on
incoming
the
pick up the 2
Making phone calls
- To place a call simply dial the desired phone number and press
- Or you can simply redial by selecting the desired number from the history log list display
And then press
- To end a call press
- You can also end calls from you c ell phone.
*Note: Numbers dialed from your cell phone WILL NOT show up on the recent call list on the car DVD screen.
call, which will be the only notification you get, there will be no display on the unit for
other incoming call; however your cell phone will display the incoming call, you can only
nd
call from your cell phone; otherwise inbound call will go into voicemail.
send.
send.
end.
Transferring calls back to your cell phone
- Touch
- To transfer phone call back to the car, simply turn Bluetooth back on and the unit should
Connect back to your phone if not, touch
*Note: Turning off car DVD without turning the Bluetooth off will disconnect the current phone call.
transfer icon on the screen then press
transfer.
“ON/OFF”
.
Bonus Feature
This car DVD unit’s Bluetooth has a unique sensitivity and will pick up calls even when your cell
Phone is a few feet away from your car.
11
Radio Mode
-
Press
Power/SRC
-
Band Select:
-
Manual Tuning:
-
Automatic Tuning:
-
Storing Radio Stations:
desired
display spot on the stored radio station list on the left side of the screen.
Touch “
Touch
button on the unit, and then touch the “
BAND
” to select from
Touch and hold
Locate your favorite station using, then touch and hold the
Radio Operation
FM1, FM2, FM3, AM1 or AM2.
Radio
” icon the screen.
repeatedly to locate the desired frequency.
for 3 seconds to search available frequencies.
g
Station frequency will be transferred to the list; once set. Repeat steps for the rest of the list
and
Band section.
-
Automatic Radio Station Storing:
Simply
*NOTE:
RDS
touch and hold the “
This unit can store up to 18 FM Stations (FM1=6, FM2=6, FM3=6) and up to 12 AM Stations (AM1=6 AM2=6).
To randomly store available frequencies to the list,
AS/PS
” for about 2 seconds then release.
-
RDS (Radio Data System):
Selection of changing radio frequencies for European band, in order to function.
-
AF/TA/PTY
AF
– Alternate Frequency (Selects a stronger signal with the same programming)
TA
– Traffic Announcement (Traffic broadcast)
PTY
– Program Type (Sports, News, Talk, etc…)
MANUAL SELECT OF RADIO FREQUENCY
will ONLY show in European Frequencies.
This unit also has RDS feature. Functions require manual
At Radio mode, press “set up” first; Then choose “BASIC” mode, press the line of Radio on
to
screen
changed display words to RED color, Press “+” to transfer the Radio frequency.
USA
EUR
To change radio band from USA to European
*This unit support USA and European frequency only.
12
Media Operation
Music/MP3 CD Mode
- Insert a Music or MP3 Disc into the disc slot with label facing up. The unit will automatically
switch
-
Track Select:
to
“DISC”
To skip forward or backwards through the tracks simply press.
mode and play the first track.
- Press ►
-
Random Playing:
again
-
Repeat Play:
again to turn off repeat play. For MP3 play, to repeat a track press “
folder,
- For on-screen touch controls: Touch screen to bring up sub-menu (see page 9 for reference).
DVD/VCD Mode
- Insert a DVD or VCD disc into the disc slot with label facing up. The unit will automatically switch
to
- To skip or find chapters simply press
- Press ►
-
“Subtitle
-
“Repeat Play
3x for all and 4x to turn repeat off.
- For on-screen control:
II
to
3x to
“DVD”
II
to pause and play music.
Press
“BAND/RDM”
turn random off.
Press
repeat all and 4x to turn repeat off.
“ST/RPT”
button once to play tracks in random order press
button to repeat what’s currently playing, press
mode and start playing the content of the disc.
to pause and play movie.
”, Press
“SUB-T”
”, Press “
on the remote to turn on/off.
RPT
” once to repeat current chapter/track, 2x for “
Touch screen to bring up sub-menu (
to
find the desired chapter.
RPT
” once, 2x for a whole
Title
see page 8 for reference).
” (entire movie),
USB/SD Mode
(Note: USB PORT is for flash drive only, will not work for IPOD).
- Inserting a USB media device: Remove the protective cover of the USB input, plug in
Device into the unit. (Unit will automatically switch to USB mode). If audio files are Present, then the first track will play automatically.
- To view pictures press the right arrow on the remote or on the screen’s sub-menu then
◄ le
f
t until the is highlighted on the bottom of the screen, then press “Enter” then
up arrow and then “Enter” to play the first file.
on the bottom of the screen.
*Note: Random play is only available on pictures and audio files. Repeat play is available on all.
AUX
- To use “AUX” (auxiliary) mode: Plug a 3.5mm audio/video cable into the “AUX input”
*Note:
removing memory card makes sure you are not on SD mode.
MODE
In front of the unit then to your device. Press the “SRC” button and select “Input” on the
Main screen.
You can only control your device functions through the inserted device.
13
pp
p
y
/
f
pag
f
f
f
y
Problem Reason/Cause Conclusion/Solution
Will
not turn on
Remote control
functional.
DVD/CD
or
play,
No Sound/Volume
or will not increase.
will not
play properly.
.
not
Trouble Shooting
Incorrect wiring connections.
Insufficient battery power.
Remote
Disk is dirty or scratched.
Disc isn’t compatible with unit.
Content
su
Incorrect wiring connection.
Unit is on mute, playing frame by
frame,
rewinding
sensor blocked.
of
the disc is not
orted.
fast forwarding or
is
turned on.
Check all wires are properly connected.
Please
Replace battery. (page 2)/ Make sure there is
nothing
Clean the disc with a soft cloth.
Check disc compatibility. (see page 3)
Try
Check all the speaker wires are connected
properly
themselves.
refer to the wiring
blocking the remote control sensor.
another disc that is compatible.
with the unit and the speakers
Un-Mute the unit.
diagram
Certain
LCD
When the unit powers
USB flash drive
Subtitle
Videos/Pictures
obscure
Does not play
connect
speaker
output sound.
not
does not display
picture,
“picture off for
LCD
com
on,
No subtitle
Bluetooth
or
safety.”
screen will not
come
there is a
not
language.
out
letel
noise
read.
in
the wrong
or
blurred.
files.
will not
to my
say
stuck.
loud
.
.
Music
phone.
will
will
are
Fader/Balance settings activated.
Speaker(s)
“Brake in” wire not connected
properly
Parking brake is not applied or
Or
wiring
Obstacle blocking the way. No
power.
The unit is reading inserted disc.
disc drive is resetting to its
The
normal
Loose or dirty connection.
Unsupported
Subtitle not activated. / DVD
movie
desired language.
the
Video/picture resolutions are low. Make sure the videos/pictures have the
Files are not supported.
Bluetooth on the cell phone or the
DVD is turned off.
car
might be damage.
to
the park brake wiring.
not properly connected.
position.
does not have subtitle in
format.
Make sure all the connections linking the
speakers
Make sure all the speakers work properly.
Picture will only appear when parking brake
applied for safety. / Check wiring and
is
make sure everything is properly connected.
Make sure “Brake in” wire is properly
connected
Make sure unit has power and is turned on.
Reset
are properly connected.
to
the hand brake or ground.
unit by press the reset button on the
ront of
the unit
(See
Normal function.
Check/clean connections.
Make sure the USB flash drive is securely
inserted
Press
on. Make sure DVD movie has subtitle with
the desired language.
appropriate
Check that the files are supported.
(see page 3)
Make sure the
Make sure Bluetooth is turn on both devices,
and
into USB
“SUB-T” on the remote to switch
is
paired properly. Turn car DVD on/off.
port.
resolution for a 7” screen.
iles are converted correctly.
e
Calls
end when I
transfer
my
to
Not all my
calls
MP4 video will not
Can’t set “BASS” or
“TREBLE” on set up
the call back
phone and turn
unit o
the
are listed on the
histor
play.
.
recent
list.
Call not properly transferred.
Some calls were made from the
phone.
cell
Require compatible MP4
format/codec.
“EQ” is not on “ NORM”
14
When transferring calls back to cell phone,
make
before
Only calls dialed and received from the car
DVD will be stored on the history list.
See page 3 (MP4).
When “EQ” is on other th
no setting can be change,
sure to turn off Bluetooth on the unit
turning the car DVD off.
en “ NORM”
Specifications
General
- Power Requirements …........ 12 V DC, Negative Ground
- Load Impedance …………..……. 4Ω-8Ω
- Tone Control …………………….… ±
8dB (Bass 100Hz, Treble 10KHz)
- Dimensions ……………………….… Approx. 8.25”D x 7.50”W x 6.5”H (Opened)
- Mounting Dimensions …....... 7.75”D x 7.25”W x 2.00”H