Suhr Iso Boost User Manual

®

Iso Boost

™

USER MANUAL

Thank you for purchasing the Suhr Iso Boost™ pedal. Please take the time to read this manual to get the most out of your pedal.

The more you familiarize yourself with the features of this pedal, the more you will enjoy its benefits and maximize its potential.

OVERVIEW

Iso Boost incorporates a clean transparent boost, as well as a transformer

isolated buffered signal to drive long effects chains. The Iso Boost is the ultimate

boost pedal and line driver that expands the range of your tube amplifier

Iso Boost features an easy to tweak layout which include a Boost control and a

two position Iso (Isolation) switch.

CONTROLS

Boost: Adjusts the amount of boost from the circuit, from Unity (0dB) to +20dB

of gain.

Iso (Isolation) Switch (two position): Activates a transformer to isolate the

output and eliminate ground loops between amplifiers and effects.

Left: Isolated transformer, buffered output

Right: Non-isolated, buffered output

Note: Iso Boost is always buffered.

OPERATION:

Install a 9V battery or use a suitable 9Vdc, center negative power

supply.

Plug your guitar into the input jack and connect your amp to the

output jack. Note: Connecting a cable to the input jack will power up

the pedal. If using the internal battery, remember to unplug your cable

from the input jack when you are done playing in order to insure a

long battery life. To activate, tap the foot switch and Iso’s LED will

illuminate green indicating that it is in the signal path.