Sub-Zero ID-36C Quick Reference Guide
36" DESIGNER REFRIGERATOR/FREEZER DRAWERS - PANEL READY
ID-36C
FEATURES
Accepts custom panels for an integrated look within cabinetry or
stainless-steel accessory panels and handles to match other Sub-Zero,
Wolf, and Cove products
Controls temperature within one degree of setpoint
Keeps dairy, produce, and other perishables at their optimal temperature
Locks in cold air to ensure freshness with magnetic door seals
Control brightness with soft-on LED lighting
Open and close doors silently with soft-close technology
ACCESSORIES
Dual Installation Kit
Egg Container
Reduced Toekick Divider
Stainless Steel Pro Handles
Stainless Steel Tubular Handles
Stainless Steel Drawer Panels With Pro Handles - 4" Toe Kick
Stainless Steel Drawer Panels With Pro Handles - 6" Toe Kick
Stainless Steel Drawer Panels With Tubular Handles - 4" Toe Kick
Stainless Steel Drawer Panels With Tubular Handles - 6" Toe Kick
Stainless Steel Dual Installation Kickplates
Accessories are available through an authorized dealer.
For local dealer information, visit subzero-wolf.com/locator.
HANDLE ACCESSORIES
PRODUCT DETAILS
REFRIGERATOR
• Adjustable bottom drawer dividers
• LED lighting
Specifications are subject to change without notice. This information was generated on February 20, 2021. Verify specifications prior to finalizing your cabinetry/enclosures.
36" DESIGNER REFRIGERATOR/FREEZER DRAWERS - PANEL READY
PRODUCT SPECIFICATIONS
Model ID-36C
Dimensions 36"W x 34 1/2"H x 24"D
Drawer Clearance 18 3/8"
Refrigerator Capacity 3.8 cu. ft.
Freezer Capacity 2.5 cu. ft.
Electrical Supply 115 VAC, 60 Hz
Electrical Service 15 amp dedicated circuit
ELECTRICAL
PANEL SPECIFICATIONS For complete panels specifications including width/height,
weight requirements and thickness requirements visit subzero-wolf.com/reveal.
NOTE: Dimensions in parenthesis are in millimeters unless otherwise specified
INTERIOR VIEW
This illustration is intended for interior reference only and may not represent the exterior
of the model being specified.
DIMENSIONS
STANDARD INSTALLATION
NOTE:
31/2"
(89)
finished returns will be visible and should be finished to match cabinetry
.
36"
(914)
OPENING WIDTH
3
41/2"
(876)
OPENING
HEIGHT
SIDE VIEW
FRONT VIEW
25"
(635)
OPENING
DEPTH
TOP VIEW
3
/4"
(19)
TYPICAL
FRAMED
CABINETRY
36"
(914)
FILLER
31/2"
(89)
FINISHED
RETURN
FRAMELESS
CABINETRY
36"
(914)
3
/4"
(19)
TYPICAL
31/2"
(89)
FINISHED
RETURN
Specifications are subject to change without notice. This information was generated on February 20, 2021. Verify specifications prior to finalizing your cabinetry/enclosures.
Loading...