Sub-Zero ICBBI-36R, ICBBI-36F, ICBBI-30U, ICBBI-36U, ICBBI-36UFD Design Manual

INTERNATIONAL DESIGN GUIDE

Contents

3 Built-In Refrigeration

30 PRO 48 Refrigeration

35 Integrated Refrigeration

44 Wine Storage

71 Sub-Zero Warranty

Features and specications are subject to change at any time without notice.

IMPORTANT NOTE: Throughout this guide, dimensions may

vary by ± 3 mm.

BUILT-IN REFRIGERATION

Built-In Refrigeration

BUILT-IN PRO 48 INTEGRATED WINE

For the built-in line, Sub-Zero designers and engineers took a fresh look at everything, inside and out. Exterior renements include redesigned grilles and lower-prole hinges. Inside, new technology in food preservation makes the builtin line nothing short of revolutionary.

KEY FEATURES

• Three distinct design approaches: overlay, ush inset

and stainless steel.

• Handle options coordinate with handles of Wolf cooking

products.

BUILT-IN MODELS

• Dual refrigeration; two compressors preserve food’s

goodness in two sealed compartments.

• Energy efcient.

• Internal dispenser model provides ice and chilled water

inside the refrigerator.

• Crisper and deli drawers form a lower-temperature zone

for produce and meats.

• Flip-up grille provides easy access for quick routine

maintenance.

• All models are Star-K certied.

ICBBI-36R

ICBBI-42S

ICBBI-36F

ICBBI-42SD

ICBBI-30U

ICBBI-48S

ICBBI-36U

ICBBI-36UFD

ICBBI-48SID

ICBBI-36S

ICBBI-48SD

subzero.com | 3

BUILT-IN REFRIGERATION

Overall Dimensions

ALL REFRIGERATOR / ALL FREEZER

914 mm

2134

1873

mm

HEIGHT DIMENSIONS ± 13 mm

mm

102 mm

665 mm

606 mm

OVER-AND-UNDER

762 mm

HEIGHT DIMENSIONS ± 13 mm

1289

mm

584 mm

2134

mm

102 mm

665 mm

606 mm

WINE INTEGRATED PRO 48 BUILT-IN

606 mm

359 mm

946 mm

60 mm

Model ICBBI-36R and ICBBI-36F.

Overall dimensions are based on stainless steel models. For ush inset applications, add 13 mm to door clearance dimensions.

606 mm

600 mm

Model ICBBI-30U.

308 mm

60 mm

796 mm

4 | English

BUILT-IN REFRIGERATION

Overall Dimensions

OVER-AND-UNDER

BUILT-IN PRO 48 INTEGRATED WINE

914 mm

HEIGHT DIMENSIONS ± 13 mm

606 mm

2134

1289

mm

584 mm

359 mm

mm

102 mm

665 mm

606 mm

914 mm

HEIGHT DIMENSIONS ± 13 mm

203 mm

1289

mm

584 mm

606 mm

2134

mm

102 mm

665 mm

606 mm

600 mm

60 mm

Model ICBBI-36U.

946 mm

60 mm

Model ICBBI-36UFD.

495 mm

600 mm

subzero.com | 5

BUILT-IN REFRIGERATION

Overall Dimensions

SIDE-BY-SIDE

914 mm

HEIGHT DIMENSIONS ± 13 mm

184 mm

1873

mm

222 mm

2134

mm

102 mm

606 mm

665 mm

606 mm

HEIGHT DIMENSIONS ± 13 mm

191 mm

1067 mm

1873

mm

264 mm

2134

mm

102 mm

606 mm

665 mm

606 mm

565 mm

60 mm

Model ICBBI-36S.

WINE INTEGRATED PRO 48 BUILT-IN

6 | English

Model ICBBI-42S and ICBBI-42SD.

60 mm

668 mm

BUILT-IN REFRIGERATION

1219 mm

2134

mm

102 mm

1873

mm

606 mm

762 mm

295 mm

213 mm

60 mm

HEIGHT DIMENSIONS ± 13 mm

665 mm

BUILT-IN PRO 48 INTEGRATED WINE

Overall Dimensions

SIDE-BY-SIDE

Specications

BUILT-IN MODELS

INTERIOR CAPACITY

ALL REFRIGERATOR / ALL FREEZER R (L) F (L)

ICBBI-36R 613 ICBBI-36F 612

OVER-AND-UNDER R (L) F (L)

ICBBI-30U 311 111 ICBBI-36U 367 143 ICBBI-36UFD 357 144

SIDE-BY-SIDE R (L) F (L)

ICBBI-36S 328 225 ICBBI-42S 430 220 ICBBI-42SD 408 194 ICBBI-48S 500 264 ICBBI-48SID 491 244 ICBBI-48SD 478 244

Model ICBBI-48S, ICBBI-48SID and ICBBI-48SD.

subzero.com | 7

BUILT-IN REFRIGERATION

NOTE: Shaded line represents profile of unit.

SIDE

Opening Dimensions

STANDARD INSTALLATION

610 mm

OPENING

DEPTH

TOP VIEW

W

OPENING WIDTH

FRONT VIEW

VIEW

2127 mm

OPENING

HEIGHT

OPENING WIDTH

MODEL W

ICBBI-36R, ICBBI-36F 902 mm ICBBI-30U 749 mm ICBBI-36U, ICBBI-36UFD, ICBBI-36S 902 mm ICBBI-42S, ICBBI-42SD 1054 mm ICBBI-48S, ICBBI-48SID, ICBBI-48SD 1206 mm

If a 2108 mm grille height is specied, the opening height must be decreased by 22 mm. If a 2235 mm grille height is specied, the opening height must be increased by 102 mm.

If two units are installed side by side, refer to page 10 for dual standard installations.

WINE INTEGRATED PRO 48 BUILT-IN

8 | English

BUILT-IN REFRIGERATION

*

NOTE: Shaded line represents profile of unit with

SIDE

Opening Dimensions

FLUSH INSET INSTALLATION

665 mm

FLUSH

INSET

DEPTH

56

mm

TOP VIEW

FINISHED

CLEATS*

BUILT-IN PRO 48 INTEGRATED WINE

6 mm

2134 mm

FLUSH

INSET

HEIGHT

VIEW

76 mm typical depth. Shaded areas will be visible and should be finished to match cabinetry.

19 mm panel.

32 mm

W

FLUSH INSET WIDTH

FRONT VIEW

102 mm

32

mm

76

mm*

TYPICAL

56

mm

FLUSH INSET WIDTH

MODEL W

ICBBI-36R, ICBBI-36F 965 mm ICBBI-30U 813 mm ICBBI-36U, ICBBI-36UFD, ICBBI-36S 965 mm ICBBI-42S, ICBBI-42SD 1118 mm ICBBI-48S, ICBBI-48SID, ICBBI-48SD 1270 mm

Dimensions assume a 19 mm panel thickness.

If a 2108 mm grille height is specied, the ush inset height must be decreased by 22 mm. If a 2235 mm grille height is specied, the ush inset height must be increased by 102 mm.

If two units are installed side by side, refer to page 11 for dual ush inset installations.

subzero.com | 9

BUILT-IN REFRIGERATION

NOTE: Shaded line represents profile of unit.

SIDE

Opening Dimensions

DUAL STANDARD INSTALLATION

610 mm

OPENING

DEPTH

TOP VIEW

VIEW

2127 mm

OPENING

HEIGHT

OPENING WIDTH

MODELS W

Two 762 mm Models 1518 mm 762 mm Model and 914 mm Model 1670 mm Two 914 mm Models 1822 mm

W

FRONT VIEW

A dual installation kit will be required for this installation.

WINE INTEGRATED PRO 48 BUILT-IN

10 | English

BUILT-IN REFRIGERATION

*

NOTE: Shaded line represents profile of unit with

SIDE

Opening Dimensions

DUAL FLUSH INSET INSTALLATION

665 mm

FLUSH

INSET

DEPTH

56

mm

TOP VIEW

FINISHED

CLEATS*

BUILT-IN PRO 48 INTEGRATED WINE

6 mm

2134 mm

FLUSH

INSET

HEIGHT

VIEW

76 mm typical depth. Shaded areas will be visible and should be finished to match cabinetry.

19 mm panel.

32 mm

FLUSH INSET WIDTH

FRONT VIEW

W

32

mm

102 mm

76

mm*

TYPICAL

56

mm

FLUSH INSET WIDTH

MODELS W

Two 762 mm Models 1581 mm 762 mm Model and 914 mm Model 1734 mm Two 914 mm Models 1886 mm

Dimensions assume a 19 mm panel thickness. A dual installation kit will be required for this installation.

subzero.com | 11

BUILT-IN REFRIGERATION

Electrical

International models from the factory designed without a transformer require a 220-240 V AC, 50/60 Hz electrical supply, fused at the correct rating for the unit. If required by local or national codes, the power cord can be easily replaced using the power inlet device.

The electrical supply should be located within the shaded area shown in the illustration below. A separate circuit, servicing only this appliance is required. A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation.

Installation must comply with all applicable electrical codes.

ELECTRICAL REQUIREMENTS

Power Supply 220-240 V AC, 50/60 Hz

Circuit Breaker 10 amp

Receptacle grounding-type (earthed)

Plumbing

For built-in models with an automatic ice maker, the water supply line should be located within the shaded area shown in the illustration below. The water supply line should be connected to the house supply with an easily accessible shut-off valve. Do not use self-piercing valves. The water supply line must not interfere with installation of the anti-tip brackets.

A reverse osmosis system can be used provided there is constant water pressure of 2.4–8.3 bar supplied to the unit at all times. A copper line is not recommended for this application.

Installation must comply with all applicable plumbing codes.

PLUMBING REQUIREMENTS

Water Supply Line 6.35 mm OD copper line,

braided stainless steel, or PEX tubing

Water Pressure 2.4–8.3 bar

Excess Water Line for Connection .9 m

WINE INTEGRATED PRO 48 BUILT-IN

178

E

mm

152 mm

1918 mm

FROM FLOOR

RIGHT SIDE

OF OPENING

Electrical supply location.

RIGHT SIDE

OF OPENING

152

457 mm

AREA EXTENDS 13 mm

FORWARD ON FLOOR

Water supply location.

mm

76 mm

12 | English

BUILT-IN REFRIGERATION

BUILT-IN PRO 48 INTEGRATED WINE

Custom Panels

For overlay and ush inset applications, custom door panels must be provided. Handle hardware must also be provided for overlay and ush inset applications. Refer to panel requirements below and the charts on pages 15–18 for custom panel dimensions for your specic design application.

IMPORTANT NOTE: Do not cover a glass door with a solid

panel.

Finish all sides of the custom panels. They may be visible when the door is open or through the window of glass door models.

PANEL REQUIREMENTS

PANEL WEIGHT MAX

ICBBI-36R, ICBBI-36F 34 kg All Other Models 23 kg Grille Panel 6 kg

PANEL THICKNESS MIN

All Panels 16 mm

Custom Panels

PANEL MOUNTING KIT

A Sub-Zero custom panel mounting kit eliminates the need for a backer and spacer panel and is avail able through an authorized Sub-Zero dealer. The kit consists of mounting cleats, screws and gages used to properly position the cleats. The kit is available for all built-in models. Dual installations require two mounting kits.

OVERLAY PANELS

Overlay panels are typically created by combining a 19 mm custom panel, a 3 mm spacer panel and a 6 mm backer panel. Refer to the illustrations below.

When installing two units side by side, refer to page 10 for dual standard installations.

SPACER PANEL

CUSTOM PANEL

CUSTOM

PANEL

SPACER

PANEL

BACKER PANEL

TRIM

8 mm min

3 mm (OVERLAY)

Panel assembly cross section (overlay).

BACKER

PANEL

19

mm

TYPICAL

Panel assembly rear view.

mm

6 mm

3

subzero.com | 13

BUILT-IN REFRIGERATION

160 mm

2 mm

3 mm

RADIUS

16 mm

327 mm

Custom Panels

FLUSH INSET PANELS

The ush inset application is an overlay model with ush inset panels. It is not a separate model.

The ush inset design allows custom panels to be installed ush with adjacent cabinets. Similar to overlay, ush inset panels are typically created by combining a 19 mm custom panel, a 3 mm spacer panel and a 6 mm backer panel. Refer to the illustrations for overlay panels.

For ush inset panels thicker than 19 mm, a 90° door stop may be required to prevent interference with adjacent cabinets. Refer to the full-scale templates at the end of this guide.

When installing two units side by side, refer to page 11 for dual ush inset installations.

ICE AND WATER DISPENSER

For models ICBBI-42SD and BI-48SD, the refrigerator door panel must include a cut-out to accommodate the external dispenser. The thickness of the panel in this area can range from 6 mm to a maximum of 29 mm. Refer to the illustrations below.

51

25

mm

HANDLE

GLASSWELL

WINE INTEGRATED PRO 48 BUILT-IN

Dispenser dimensions.

Handle placement.

14 | English

BUILT-IN REFRIGERATION

H

W

AA

A

H

W

AA

A

B

H

W

H

W

W W

H

W

AA

A

H

W

W W

Overlay Panel Dimensions

BUILT-IN PRO 48 INTEGRATED WINE

H

W

ICBBI-36R / ICBBI-36F

W

ICBBI-30U / ICBBI-36U

H

ICBBI-36UFD

MODEL ICBBI-36R, ICBBI-36F

REFRIGERATOR / FREEZER W H

Overlay Panel 914 mm 1772 mm Spacer Panel 892 mm 1751 mm Backer Panel 908 mm 1767 mm

GRILLE W H

Overlay Panel 914 mm 235 mm* Spacer Panel 892 mm 211 mm Backer Panel 908 mm 227 mm

MODEL ICBBI-30U

REFRIGERATOR W H

Overlay Panel 762 mm 1273 mm Spacer Panel 740 mm 1253 mm Backer Panel 756 mm 1268 mm

FREEZER W H

Overlay Panel 762 mm 483 mm Spacer Panel 740 mm 459 mm Backer Panel 756 mm 475 mm

GRILLE W H

Overlay Panel 762 mm 235 mm* Spacer Panel 740 mm 211 mm Backer Panel 756 mm 227 mm

W W

W

H

MODEL ICBBI-36U

REFRIGERATOR W H

Overlay Panel 914 mm 1273 mm Spacer Panel 892 mm 1253 mm Backer Panel 908 mm 1268 mm

FREEZER W H

Overlay Panel 914 mm 483 mm Spacer Panel 892 mm 459 mm Backer Panel 908 mm 475 mm

GRILLE W H

Overlay Panel 914 mm 235 mm* Spacer Panel 892 mm 211 mm Backer Panel 908 mm 227 mm

MODEL ICBBI-36UFD

REFRIGERATOR (2 PANELS) W H

Overlay Panels 454 mm 1273 mm Spacer Panels 432 mm 1253 mm Backer Panels 448 mm 1268 mm

FREEZER W H

Overlay Panel 914 mm 483 mm Spacer Panel 892 mm 459 mm Backer Panel 908 mm 475 mm

GRILLE W H

Overlay Panel 914 mm 235 mm* Spacer Panel 892 mm 211 mm Backer Panel 908 mm 227 mm

subzero.com | 15

BUILT-IN REFRIGERATION

H

W

AA

A

H

W

H

W

AA

A

B

H

W

H

WW

B

A

H

W

W W

H

W

AA

A

H

W

AA

A

B

H

W

H

W

W W

Overlay Panel Dimensions

WINE INTEGRATED PRO 48 BUILT-IN

H

A

W

ICBBI-36S / ICBBI-42S

W

WW

ICBBI-42SD / ICBBI-48SD

ICBBI-48S / ICBBI-48SID

MODEL ICBBI-36S

REFRIGERATOR W H

Overlay Panel 510 mm 1772 mm Spacer Panel 487 mm 1751 mm Backer Panel 503 mm 1767 mm

FREEZER W H

Overlay Panel 398 mm 1772 mm Spacer Panel 376 mm 1751 mm Backer Panel 392 mm 1767 mm

GRILLE W H

Overlay Panel 914 mm 235 mm* Spacer Panel 892 mm 211 mm Backer Panel 908 mm 227 mm

MODEL ICBBI-42S, ICBBI-42SD

REFRIGERATOR W H

Overlay Panel 637 mm 1772 mm Spacer Panel 614 mm 1751 mm Backer Panel 630 mm 1767 mm

FREEZER W H

Overlay Panel 424 mm 1772 mm Spacer Panel 402 mm 1751 mm Backer Panel 418 mm 1767 mm

GRILLE W H

Overlay Panel 1067 mm 235 mm* Spacer Panel 1045 mm 211 mm Backer Panel 1060 mm 227 mm

ICBBI-42SD W H

Dispenser Cut-Out 149 mm 316 mm

A B

Cut-Out Location 51 mm 732 mm

16 | English

H

B

MODEL ICBBI-48S, ICBBI-48SID, ICBBI-48SD

REFRIGERATOR W H

Overlay Panel 730 mm 1772 mm Spacer Panel 708 mm 1751 mm Backer Panel 724 mm 1767 mm

FREEZER W H

Overlay Panel 483 mm 1772 mm Spacer Panel 460 mm 1751 mm Backer Panel 476 mm 1767 mm

GRILLE W H

Overlay Panel 1219 mm 235 mm* Spacer Panel 1197 mm 211 mm Backer Panel 1213 mm 227 mm

ICBBI-48SD W H

Dispenser Cut-Out 149 mm 316 mm

Cut-Out Location 51 mm 732 mm

*Panel height may be increased by 11 mm to hide upper main

A B

frame.

Grille panel dimensions are for standard 2134 mm overall unit height. For 2108 mm height, subtract 25 mm from grille panel height dimensions and for 2235 mm height, add 102 mm. A specic panel grille must be ordered for a 2108 mm or 2235 mm overall unit height.

BUILT-IN REFRIGERATION

H

W

AA

B

H

W

AA

A

B

H

W

H

W

W W

H

W

AA

B

H

W

W W

Flush Inset Panel Dimensions

BUILT-IN PRO 48 INTEGRATED WINE

H

W

ICBBI-36R / ICBBI-36F

W

ICBBI-30U / ICBBI-36U

H

ICBBI-36UFD

MODEL ICBBI-36R, ICBBI-36F

REFRIGERATOR / FREEZER W H

Flush Inset Panel 940 mm 1772 mm Spacer Panel 892 mm 1751 mm Backer Panel 908 mm 1767 mm

GRILLE W H

Flush Inset Panel 940 mm 235 mm Spacer Panel 892 mm 211 mm Backer Panel 908 mm 227 mm

MODEL ICBBI-30U

REFRIGERATOR W H

Flush Inset Panel 787 mm 1273 mm Spacer Panel 740 mm 1253 mm Backer Panel 756 mm 1268 mm

FREEZER W H

Flush Inset Panel 787 mm 483 mm Spacer Panel 740 mm 459 mm Backer Panel 756 mm 475 mm

GRILLE W H

Flush Inset Panel 787 mm 235 mm Spacer Panel 740 mm 211 mm Backer Panel 756 mm 227 mm

W W

W

H

MODEL ICBBI-36U

REFRIGERATOR W H

Flush Inset Panel 940 mm 1273 mm Spacer Panel 892 mm 1253 mm Backer Panel 908 mm 1268 mm

FREEZER W H

Flush Inset Panel 940 mm 483 mm Spacer Panel 892 mm 459 mm Backer Panel 908 mm 475 mm

GRILLE W H

Flush Inset Panel 940 mm 235 mm Spacer Panel 892 mm 211 mm Backer Panel 908 mm 227 mm

MODEL ICBBI-36UFD

REFRIGERATOR (2 PANELS) W H

Flush Inset Panels 467 mm 1273 mm Spacer Panels 432 mm 1253 mm Backer Panels 448 mm 1268 mm

FREEZER W H

Flush Inset Panel 940 mm 483 mm Spacer Panel 892 mm 459 mm Backer Panel 908 mm 475 mm

GRILLE W H

Flush Inset Panel 940 mm 235 mm Spacer Panel 892 mm 211 mm Backer Panel 908 mm 227 mm

subzero.com | 17

BUILT-IN REFRIGERATION

H

W

AA

A

H

W

H

W

AA

A

B

H

W

H

WW

B

A

H

W

W W

H

W

AA

A

H

W

AA

A

B

H

W

H

W

W W

Flush Inset Panel Dimensions

WINE INTEGRATED PRO 48 BUILT-IN

H

A

W

ICBBI-36S / ICBBI-42S

W

WW

ICBBI-42SD / ICBBI-48SD

ICBBI-48S / ICBBI-48SID

MODEL ICBBI-36S

REFRIGERATOR W H

Flush Inset Panel 522 mm 1772 mm Spacer Panel 487 mm 1751 mm Backer Panel 503 mm 1767 mm

FREEZER W H

Flush Inset Panel 411 mm 1772 mm Spacer Panel 376 mm 1751 mm Backer Panel 392 mm 1767 mm

GRILLE W H

Flush Inset Panel 940 mm 235 mm Spacer Panel 892 mm 211 mm Backer Panel 908 mm 227 mm

MODEL ICBBI-42S, ICBBI-42SD

REFRIGERATOR W H

Flush Inset Panel 649 mm 1772 mm Spacer Panel 614 mm 1751 mm Backer Panel 630 mm 1767 mm

FREEZER W H

Flush Inset Panel 437 mm 1772 mm Spacer Panel 402 mm 1751 mm Backer Panel 418 mm 1767 mm

GRILLE W H

Flush Inset Panel 1092 mm 235 mm Spacer Panel 1045 mm 211 mm Backer Panel 1060 mm 227 mm

DISPENSER (ICBBI-42SD) W H

Dispenser Cut-Out 149 mm 316 mm

A B

Cut-Out Location 51 mm 732 mm

18 | English

H

B

MODEL ICBBI-48S, ICBBI-48SID, ICBBI-48SD

REFRIGERATOR W H

Flush Inset Panel 743 mm 1772 mm Spacer Panel 708 mm 1751 mm Backer Panel 724 mm 1767 mm

FREEZER W H

Flush Inset Panel 495 mm 1772 mm Spacer Panel 460 mm 1751 mm Backer Panel 476 mm 1767 mm

GRILLE W H

Flush Inset Panel 1245 mm 235 mm Spacer Panel 1197 mm 211 mm Backer Panel 1213 mm 227 mm

DISPENSER (ICBBI-48SD) W H

Cut-Out 149 mm 316 mm

Cut-Out Location 51 mm 732 mm

Grille panel dimensions are for standard 2134 mm overall unit

A B

height. For 2108 mm height, subtract 25 mm from grille panel height dimensions and for 2235 mm height, add 102 mm. A specic panel grille must be ordered for a 2108 mm or 2235 mm overall unit height.

BUILT-IN REFRIGERATION

6 mm

REVEAL

8 mm

3 mm

DOOR DOOR

TOP VIEW

16

mm

8 mm

13

mm

13 mm

2

mm

8

mm

8

mm

4

mm

GRILLE

DOOR

6 mm

REVEAL

8 mm

3 mm

FLUSH INSET PANEL

SPACER

BACKER

DOOR DOOR

DOOR / DRAWER / GRILLE

TOP VIEWTOP VIEW

SIDE VIEW

CABINETRY

6 mm

REVEAL

8 mm

3 mm

DOOR DOOR

TOP VIEWTOP VIEW

16

mm

8 mm

13

mm

8

mm

2

mm

DOOR /

DRAWER

13 mm

2

mm

8

mm

8

mm

4

mm

GRILLE

DOOR

6 mm

REVEAL

8 mm

3 mm

FLUSH INSET PANEL

SPACER

BACKER

DOOR DOOR

DOOR / DRAWER / GRILLE

13 mm

8

mm

3

mm

CABINETRY

GRILLE

TOP VIEWTOP VIEW

SIDE VIEW SIDE VIEW

SIDE VIEW

CABINETRY

13 mm

2

mm

8

mm

8

mm

4

mm

GRILLE

DOOR

6 mm

REVEAL

8 mm

3 mm

DOOR DOOR

TOP VIEWTOP VIEW

Flush Inset Panels

BUILT-IN PRO 48 INTEGRATED WINE

PANEL OFFSETS

The illustrations provide panel offsets and reveals for built-in models in a ush inset application. Refer to the chart below for reference to the illustrations.

PANEL OFFSET

ALL REFRIGERATOR / ALL FREEZER ILLUS

Door / Grille Sides A Grille Top C Grille Bottom / Door Top D Door Bottom F

OVER-AND-UNDER ILLUS

Door / Drawer / Grille Sides A Grille Top C Grille Bottom / Door Top D Door Bottom / Drawer Top E Drawer Bottom F

SIDE-BY-SIDE ILLUS

Doors (hinge) / Grille Sides A Doors (handle) Sides B Grille Top C Grille Bottom / Door Top D Door Bottom F

DOOR / DRAWER / GRILLE

BACKER

SPACER

FLUSH INSET PANEL

TOP VIEW

8 mm

Illus. A

CABINETRY

GRILLE

Illus. C

DOOR

DRAWER

CABINETRY

16

mm

8

mm

SIDE VIEW

8

mm

8

mm

SIDE VIEW

13

mm

13 mm

3

2

16 mm

4

TOP VIEW

DOOR DOOR

8 mm

3 mm

Illus. B

GRILLE

DOOR

Illus. D

DOOR /

DRAWER

SIDE VIEW

6 mm

REVEAL

8

mm

8

mm

SIDE VIEW

8

mm

4

13 mm

2

mm

2

Illus. E

Illus. F

subzero.com | 19

BUILT-IN REFRIGERATION

Dual Installation

If two units are installed side by side, a dual installation kit may be required. Installations without a custom ller strip require a dual installation kit. If a dual installation kit is not specied, a 51 mm ller strip is recommended between units. A custom ller strip is required when installing two French door or side-by-side models. Dual installations without a ller strip can only be accomplished using two units with opposite hinges. Refer to the illustrations below.

Dual installation kits are available through an authorized Sub-Zero dealer. For questions regarding the installation, contact your authorized Sub-Zero dealer.

WITHOUT FILLER STRIP

FILLER STRIP

For dual standard installations, panel dimensions are the same as for single installations. Refer to the charts on pages 15–16. Panel dimensions and offsets for dual ush inset installations are listed on the following pages.

WINE INTEGRATED PRO 48 BUILT-IN

Opposite hinges.

Same side hinges.

20 | English

BUILT-IN REFRIGERATION

H

W

AA

B

H

W

AA

A

B

H

W

H

W

W W

H

W

AA

B

H

W

W W

Dual Flush Inset Panel Dimensions

BUILT-IN PRO 48 INTEGRATED WINE

H

W

ICBBI-36R / ICBBI-36F

W

ICBBI-30U / ICBBI-36U

H

MODEL ICBBI-36R, ICBBI-36F

REFRIGERATOR / FREEZER W H

Flush Inset Panel 927 mm 1772 mm Spacer Panel 892 mm 1751 mm Backer Panel 908 mm 1767 mm

GRILLE W H

Flush Inset Panel 927 mm 235 mm Spacer Panel 892 mm 211 mm Backer Panel 908 mm 227 mm

MODEL ICBBI-30U

REFRIGERATOR W H

Flush Inset Panel 775 mm 1273 mm Spacer Panel 740 mm 1253 mm Backer Panel 756 mm 1268 mm

FREEZER W H

Flush Inset Panel 775 mm 483 mm Spacer Panel 740 mm 459 mm Backer Panel 756 mm 475 mm

GRILLE W H

Flush Inset Panel 775 mm 235 mm Spacer Panel 740 mm 211 mm Backer Panel 756 mm 227 mm

MODEL ICBBI-36U

REFRIGERATOR W H

Flush Inset Panel 927 mm 1273 mm Spacer Panel 892 mm 1253 mm Backer Panel 908 mm 1268 mm

FREEZER W H

Flush Inset Panel 927 mm 483 mm Spacer Panel 892 mm 459 mm Backer Panel 908 mm 475 mm

GRILLE W H

Flush Inset Panel 927 mm 235 mm Spacer Panel 892 mm 211 mm Backer Panel 908 mm 227 mm

Grille panel dimensions are for standard 2134 mm overall unit height. For 2108 mm height, subtract 25 mm from grille panel height dimensions and for 2235 mm height, add 102 mm. A specic panel grille must be ordered for a 2108 mm or 2235 mm overall unit height. For dual wide grilles, refer to page 23.

subzero.com | 21

BUILT-IN REFRIGERATION

6 mm

REVEAL

8 mm

3 mm

DOOR DOOR

TOP VIEW

16

mm

8 mm

13

mm

13 mm

2

mm

8

mm

8

mm

4

mm

GRILLE

DOOR

6 mm

REVEAL

8 mm

3 mm

FLUSH INSET PANEL

SPACER

BACKER

DOOR DOOR

DOOR / DRAWER / GRILLE

TOP VIEWTOP VIEW

SIDE VIEW

CABINETRY

6 mm

REVEAL

8 mm

3 mm

DOOR DOOR

TOP VIEWTOP VIEW

16

mm

8 mm

13

mm

8

mm

2

mm

DOOR /

DRAWER

13 mm

2

mm

8

mm

8

mm

4

mm

GRILLE

DOOR

6 mm

REVEAL

8 mm

3 mm

FLUSH INSET PANEL

SPACER

BACKER

DOOR DOOR

DOOR / DRAWER / GRILLE

13 mm

8

mm

3

mm

CABINETRY

GRILLE

TOP VIEWTOP VIEW

SIDE VIEW SIDE VIEW

SIDE VIEW

CABINETRY

13 mm

2

mm

8

mm

8

mm

4

mm

GRILLE

DOOR

6 mm

REVEAL

8 mm

3 mm

DOOR DOOR

TOP VIEWTOP VIEW

Dual Installation

DUAL FLUSH INSET PANEL OFFSETS

The illustrations provide panel offsets and reveals for built-in models in a dual ush inset application. Refer to the chart below for reference to the illustrations.

PANEL OFFSET

ALL REFRIGERATOR / ALL FREEZER ILLUS

Door (hinge) / Grille Sides A Door (handle) Sides B Grille Top C Grille Bottom / Door Top D Door Bottom F

OVER-AND-UNDER ILLUS

Door (hinge) / Drawer / Grille Sides A Door (handle) Sides B Grille Top C Grille Bottom / Door Top D Door Bottom / Drawer Top E Drawer Bottom F

DOOR / DRAWER / GRILLE

BACKER

SPACER

FLUSH INSET PANEL

TOP VIEW

8 mm

Illus. A

CABINETRY

GRILLE

Illus. C

DOOR

DRAWER

CABINETRY

16

mm

8

mm

SIDE VIEW

8

mm

8

mm

SIDE VIEW

13

mm

13 mm

3

2

16 mm

4

TOP VIEW

DUAL TRIM

DOOR DOOR

8 mm

3 mm

Illus. B

GRILLE

DOOR

Illus. D

DOOR /

DRAWER

SIDE VIEW

6 mm

REVEAL

8

mm

8

mm

SIDE VIEW

8

mm

4

13 mm

2

mm

2

WINE INTEGRATED PRO 48 BUILT-IN

22 | English

Illus. E

Illus. F

BUILT-IN REFRIGERATION

Dual Installation

BUILT-IN PRO 48 INTEGRATED WINE

DUAL WIDE GRILLE

A dual wide grille spans the entire width of both units in a dual installation and is a part of a dual installation kit.

For overlay and ush inset panel dimensions for the dual wide grille, refer to the charts below. Dimensions listed are for a standard 2134 mm nished height.

DUAL WIDE GRILLE—OVERLAY

TWO 762 mm MODELS W H

Overlay Panel 1530 mm 235 mm Spacer Panel 1508 mm 211 mm Backer Panel 1524 mm 227 mm

762 mm MODEL AND 914 mm MODEL

Overlay Panel 1683 mm 235 mm Spacer Panel 1661 mm 211 mm Backer Panel 1676 mm 227 mm

TWO 914 mm MODELS W H

Overlay Panel 1835 mm 235 mm Spacer Panel 1813 mm 211 mm Backer Panel 1829 mm 227 mm

W H

DUAL WIDE GRILLE—FLUSH INSET

TWO 762 mm MODELS W H

Flush Inset Panel 1556 mm 235 mm Spacer Panel 1508 mm 211 mm Backer Panel 1524 mm 227 mm

762 mm MODEL AND 914 mm MODEL

W H

Flush Inset Panel 1708 mm 235 mm Spacer Panel 1661 mm 211 mm Backer Panel 1676 mm 227 mm

TWO 914 mm MODELS W H

Flush Inset Panel 1861 mm 235 mm Spacer Panel 1813 mm 211 mm Backer Panel 1829 mm 227 mm

subzero.com | 23

2134

mm

610 mm

ROUT TO

5 mm

(OVER-AND-UNDER

MODELS)

OPTIONAL

TOE KICK CUT-OUT

102 mm

521 mm

146 mm

48 mm

25 mm

108 mm

ROUT TO 3 mm

FRONT

OF SIDE

PANEL

67

mm

MAIN

FRAME

SIDE PANEL

ROUTING

25 mm

48 mm

3 mm

13 mm

BUILT-IN REFRIGERATION

Side Panel

The custom side panels must be a minimum of 610 mm deep and 13 mm thick. Routing will be necessary for the side panel to t ush against the side of the unit. Refer to the illustrations below.

When installing a built-in unit with a custom side panel, an accessory kit is required. Stainless steel and white enamel side panels are available through an authorized Sub-Zero dealer.

Standard Handles

Optional stainless steel tubular and pro handles are available through an authorized Sub-Zero dealer.

Refer to the chart below for standard handle lengths for built-in models.

HANDLE LENGTH

BUILT-IN TUBULAR PRO

Full Door 1622 mm 1147 mm Over-and-Under Door 1124 mm 952 mm 762 mm Drawer 633 mm 447 mm 914 mm Drawer 770 mm 600 mm 1067 mm Drawer 922 mm 753 mm

WINE INTEGRATED PRO 48 BUILT-IN

Side panel dimensions.

Routing detail.

24 | English

BUILT-IN REFRIGERATION

Overlay and Flush Inset Panels

FULL-SCALE TEMPLATE

Overlay and ush inset panels must be a minimum of 16 mm thick to support mounting the handle. Panel thickness does not include backer and spacer panel. Mount handle close to the opening edge of the door.

BUILT-IN PRO 48 INTEGRATED WINE

25

mm

6 mm BACKER PANEL

DOOR

DEPTH OF TUBULAR AND PRO HANDLES

51

mm

76

mm

3 mm

SPACER PANEL

32 mm PANEL

25 mm PANEL

19 mm PANEL

Overlay and ush inset panel thickness.

subzero.com | 25

BUILT-IN REFRIGERATION

606 mm

TO REAR OF UNIT

OVERALL WIDTH OF UNIT

32 mm

38 mm

44 mm

0 mm

25 mm

51 mm

57 mm

63 mm

70 mm

76 mm

83 mm

89 mm

6 mm

13 mm

19 mm

THICK OVERLAY PANEL

(TYPICAL)

6 mm

BACKER PANEL

25 mm

THICK PANEL

Overlay Application

FULL-SCALE TEMPLATE

WINE INTEGRATED PRO 48 BUILT-IN

90° door opening (top view).

26 | English

25 mm0

SCALE

BUILT-IN REFRIGERATION

Flush Inset Application

FULL-SCALE TEMPLATE

For panels thicker than 19 mm, a 90° door stop may be required to prevent interference with adjacent cabinets.

BUILT-IN PRO 48 INTEGRATED WINE

610 mm

TO BACK WALL

32 mm

56 mm

ASSUMES

19 mm

FLUSH INSET

PANEL

THICKNESS

25 mm

THICK PANEL

19 mm

THICK FLUSH INSET PANEL

(TYPICAL)

6 mm

BACKER PANEL

110° door opening (top view).

25 mm0

SCALE

subzero.com | 27

BUILT-IN REFRIGERATION

FILLER STRIP

32 mm

APPROX PROFILE OF

STAINLESS STEEL WRAPPED

DOOR AND HANDLE

Dual Standard Installation

FULL-SCALE TEMPLATE

Typical overlay or stainless steel dual installation with ller strip at maximum 110° door opening. Panel thickness may require a 90° door stop.

DOOR

CLOSED

DOOR

OPEN 110°

25 mm0

SCALE

WINE INTEGRATED PRO 48 BUILT-IN

Dual standard installation (top view).

28 | English

BUILT-IN REFRIGERATION

BUILT-IN PRO 48 INTEGRATED WINE

FILLER STRIP

38 mm

PROFILE OF

AND TUBULAR HANDLE

FLUSH INSET PANEL

19 mm

Dual Flush Inset Installation

FULL-SCALE TEMPLATE

Typical ush inset dual installation with ller strip at maximum 110° door opening. Panel thickness may require a 90° door stop.

13 mm

DOOR

CLOSED

DOOR

OPEN 110°

25 mm0

SCALE

Dual ush inset installation (top view).

subzero.com | 29

PRO 48 REFRIGERATION

PRO 48 Refrigeration

Freshness nds unmistakable expression in the Sub-Zero PRO 48. A 363 kg monument to food preservation—equal parts sculpted metal design statement and culinary secret weapon. Its vast interior, like its bold exterior, is crafted of stainless steel. The PRO 48 is available with or without a glass door and may be either built in or freestanding.

PRO 48 MODELS

ICB648PRO

ICB648PROG

KEY FEATURES

• Can be used freestanding or installed as a standard or

ush built-in application.

• Stainless steel interior as well as exterior.

• Handles coordinate with handles of Wolf ranges.

• Dual refrigeration system enhanced with triple evapora-

tors allow independent control of storage conditions in refrigerator cabinet and drawer compartments.

• Slide-out stainless steel bins t neatly under refrigerator

glass shelves.

• Exterior temperature display.

• Flip-up grille provides easy access for quick routine

maintenance.

• Star-K certied.

WINE INTEGRATED PRO 48 BUILT-IN

30 | English

PRO 48 REFRIGERATION

Overall Dimensions

PRO 48 MODELS

BUILT-IN PRO 48 INTEGRATED WINE

368 mm

1219 mm

HEIGHT DIMENSIONS ± 13 mm

1070

mm

775 mm

533 mm

2134

mm

102 mm

606 mm

657 mm

767 mm

Models ICB648PRO and ICB648PROG.

60 mm

781 mm

SPECIFICATIONS

INTERIOR CAPACITY R (L) F (L)

ICB648PRO, ICB648PROG 521 331

subzero.com | 31

PRO 48 REFRIGERATION

SIDE

Opening Dimensions

STANDARD AND FLUSH INSTALLATION

TOP VIEW

D

OPENING

DEPTH

W

OPENING WIDTH

FRONT VIEW

VIEW

H

OPENING

HEIGHT

OPENING DIMENSIONS

INSTALLATION W H D

Standard 1206 mm 2127 mm 610 mm Flush 1219 mm 2137 mm 660 mm

For standard built-in installations, the face frame of the unit will extend 51 mm beyond cabinetry. For ush installations, the front of the face frame will be ush with surrounding cabinetry.

WINE INTEGRATED PRO 48 BUILT-IN

32 | English

PRO 48 REFRIGERATION

BUILT-IN PRO 48 INTEGRATED WINE

Electrical

International models from the factory designed without a transformer require a 220-240 V AC, 50/60 Hz electrical supply, fused at the correct rating for the unit. If required by local or national codes, the power cord can be easily replaced using the power inlet device.

The electrical supply should be located within the shaded area shown in the illustration below. A separate circuit, servicing only this appliance is required. A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation.

Installation must comply with all applicable electrical codes.

ELECTRICAL REQUIREMENTS

Power Supply 220-240 V AC, 50/60 Hz

Circuit Breaker 1 amp

Receptacle grounding-type (earthed)

Plumbing

The water supply line should be located within the shaded area shown in the illustration below. The water supply line should be connected to the house supply with an easily accessible shut-off valve. Do not use self-piercing valves. The water supply line must not interfere with installation of the anti-tip bracket.

A reverse osmosis system can be used provided there is constant water pressure of 2.4–8.3 bar supplied to the unit at all times. A copper line is not recommended for this application.

Installation must comply with all applicable plumbing codes.

PLUMBING REQUIREMENTS

Water Supply 6.35 mm OD copper line,

braided stainless steel, or PEX tubing

Water Pressure 2.4–8.3 bar

Excess Water Line for Connection .9 m

178

E

mm

152 mm

1918 mm

FROM FLOOR

RIGHT SIDE

OF OPENING

Electrical supply location.

RIGHT SIDE

OF OPENING

132

152

mm

76 mm

AREA EXTENDS 13 mm

Water supply location.

FORWARD ON FLOOR

subzero.com | 33

PRO 48 REFRIGERATION

Standard Handles

Refer to the chart below for standard handle lengths for PRO 48 models.

HANDLE LENGTH

PRO 48 TUBULAR PRO

Door NA 703 mm Refrigerator Drawer NA 506 mm Freezer Drawer NA 294 mm

WINE INTEGRATED PRO 48 BUILT-IN

34 | English

INTEGRATED REFRIGERATION

Integrated Refrigeration

BUILT-IN PRO 48 INTEGRATED WINE

With custom front panels and hardware, Sub-Zero invented integrated columns, tall and drawer models that disappear into the decor. Integrated units t ush with other cabinets, making integrated refrigeration as practical and beautiful in the master suite, bar or theatre room as in the kitchen.

INTEGRATED MODELS

KEY FEATURES

• Custom front panels and hardware allow for innite

design options.

• Point-of-use refrigeration that can be placed anywhere

in the home.

• Dual refrigeration; two compressors preserve food’s

goodness in self-contained compartments.

• Energy efcient. All models rated A+ or higher.

• Star-K certied.

ICBIC-18FI

ICBID-30RP

ICBID-30CI

ICBIC-24R

ICBIC-24FI

ICBID-36CI

ICBIC-30RID

ICBIC-30FI

ICBIC-36RID

ICBIT-30RID

ICBIT-30CIID

ICBIT-36CIID

subzero.com | 35

INTEGRATED REFRIGERATION

1765

mm

W 610 mm

2134

mm*

114 mm

92 mm

*2121 mm

MIN TO 2146 mm MAX

A

B

45 mm

Specications

INTERIOR CAPACITY

COLUMN R (L) F (L)

ICBIC-18FI 230 ICBIC-24R 352 ICBIC-24FI 338 ICBIC-30RID 475 ICBIC-30FI 415 ICBIC-36RID 590

TALL R (L) F (L)

ICBIT-30RID 397 ICBIT-30CIID 295 95 ICBIT-36CIID 359 130

DRAWER R (L) F (L)

ICBID-30RP 138 ICBID-30CI 58 39 ICBID-36CI 72 49

IMPORTANT NOTE: Overall dimensions do not include

panels or handles. Dimensions will vary with panel thickness.

Overall Dimensions

COLUMN

WINE INTEGRATED PRO 48 BUILT-IN

COLUMN

MODEL W A B

ICBIC-18FI 457 mm 64 mm 419 mm ICBIC-24R, ICBIC-24FI 610 mm 102 mm 572 mm ICBIC-30RID, ICBIC-30FI 762 mm 143 mm 724 mm ICBIC-36RID 914 mm 184 mm 876 mm

36 | English

INTEGRATED REFRIGERATION

467 mm

W 610 mm

2134

mm*

268 mm

1140

mm

338 mm

114 mm

92 mm

*2121 mm MIN TO 2146 mm MAX

10 mm

A

B

45 mm

10 mm

Overall Dimensions

TALL DRAWER

BUILT-IN PRO 48 INTEGRATED WINE

876

mm*

467 mm

*864 mm

W

MIN TO 889 mm MAX

338 mm

268 mm

610 mm

6 mm

10 mm

92 mm

TALL

MODEL W A B

ICBIT-30RID, ICBIT-30CIID 762 mm 143 mm 724 mm ICBIT-36CIID 914 mm 184 mm 876 mm

DRAWER

MODEL W

ICBID-30RP, ICBID-30CI 762 mm ICBID-36CI 914 mm

subzero.com | 37

INTEGRATED REFRIGERATION

NOTE: 89 mm

SIDE

Opening Dimensions

INTEGRATED MODELS

635 mm

OPENING

DEPTH

TOP VIEW

OPENING DIMENSIONS

COLUMN W H

ICBIC-18FI 457 mm 2134 mm ICBIC-24R, ICBIC-24FI 610 mm 2134 mm ICBIC-30RID, ICBIC-30FI 762 mm 2134 mm ICBIC-36RID 914 mm 2134 mm

TALL W H

ICBIT-30RID, ICBIT-30CIID 762 mm 2134 mm ICBIT-36CIID 914 mm 2134 mm

DRAWER W H

ICBID-30RP, ICBID-30CI 762 mm 876 mm ICBID-36CI 914 mm 876 mm

H

OPENING

HEIGHT

VIEW

finished returns will be visible and should be finished to match cabinetry.

19

mm

89 mm

FINISHED

RETURN

TYPICAL

OPENING WIDTH

FRONT VIEW

89 mm

FINISHED

RETURN

The depth of each integrated model is 610 mm. Allow for panel thickness when planning the nished opening depth. A minimum 89 mm nished return is required on all sides of the opening. Framed cabinets will require additional nished ller material behind the face frame for a proper installation.

W

Refer to the illustration.

DUAL INSTALLATION

When installing two units side by side in a dual installation, the opening width is the width of the two units added together. A dual installation kit will be required for this installation. If a dual installation kit is not specied, a minimum 51 mm ller strip is required between units.

Dual installation kits are available through an authorized Sub-Zero dealer. For questions regarding the installation, contact your authorized Sub-Zero dealer.

FILLER

W W

FRAMELESS CABINETRY

WINE INTEGRATED PRO 48 BUILT-IN

38 | English

FRAMED CABINETRY

INTEGRATED REFRIGERATION

BUILT-IN PRO 48 INTEGRATED WINE

Electrical

The electrical supply must be located within the shaded area shown in the illustration and chart below. A separate circuit, servicing only this appliance is required. A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation.

Installation must comply with all applicable electrical codes.

ELECTRICAL REQUIREMENTS

Power Supply 220-240 V AC, 50/60 Hz

Circuit Breaker 10 amp

Receptacle grounding-type (earthed)

ELECTRICAL SUPPLY LOCATION

WIDTH A

457 mm Model 152 mm 610 mm Model 241 mm 762 mm Model 318 mm 914 mm Model 394 mm

LEFT SIDE

OF OPENING

Plumbing

The water supply line should be located within the shaded area shown in the illustration below. The water supply line should be connected to the house supply with an easily accessible shut-off valve. Do not use self-piercing valves. The water supply line must not interfere with installation of the anti-tip bracket.

A reverse osmosis system can be used provided there is constant water pressure of 2.4–8.3 bar supplied to the unit at all times. A copper line is not recommended for this application.

Installation must comply with all applicable plumbing codes.

PLUMBING REQUIREMENTS

Water Supply Line 6.35 mm OD copper line,

braided stainless steel, or PEX tubing

Water Pressure 2.4–8.3 bar

Excess Water Line for Connection .9 m

WATER SUPPLY LOCATION

WIDTH A

457 mm Model 76 mm 610 mm Model 140 mm 762 mm Model 152 mm 914 mm Model 229 mm

114 mm

A

E

6 mm

Electrical supply location.

FLOOR

108 mm

RIGHT SIDE

OF OPENING

152

A

mm

76 mm

AREA EXTENDS 13 mm

FORWARD ON FLOOR

Water supply location.

subzero.com | 39

INTEGRATED REFRIGERATION

Custom Panels

For integrated models, custom door panels and handle hardware must be provided. Refer to the panel requirements chart and typical panel dimensions.

The thickness of the custom panel can vary. A minimum 16 mm thick panel is required, but the thickness can be increased provided it does not exceed the weight limit. The depth of each integrated model is 610 mm. Allow for panel thickness when planning the nished opening depth. Refer to the full-scale template on page 43.

CAUTION

As reveals between cabinetry and the unit decrease, severe nger pinching can occur while door is closing.

Finish all sides of custom panels. They will be visible when the door/drawer is open.

D-style handles are recommended. Door handles must be located near the edge of the panel opposite the hinge and should be centered top to bottom. Drawer handles must be located near the top edge of each panel. Stainless steel tubular and pro handles are avail able through an authorized Sub-Zero dealer.

TYPICAL PANEL DIMENSIONS

1254

mm

345 mm

424 mm

WW

Drawer

Column

2029

mm

W

Tall

Typical panel dimensions are based on a 2134 mm nished height for column and tall models and 876 mm for drawer models, with a 102 mm toe kick and 3 mm reveals. Panel dimensions must be adjusted accordingly for all other installations. Refer to the illustration for panel heights and the chart below for panel widths.

WINE INTEGRATED PRO 48 BUILT-IN

PANEL REQUIREMENTS

COLUMN MAX WEIGHT

457 mm Model 20 kg 610 mm Model 27 kg 762 mm / 914 mm Model 34 kg

TALL (DOOR) MAX WEIGHT

762 mm Model 22 kg 914 mm Model 27 kg

DRAWER MAX WEIGHT

Drawer Panel 7 kg

PANEL THICKNESS MINIMUM

All Panels 16 mm

PANEL WIDTH

MODEL W

457 mm Model 451 mm 610 mm Model 603 mm 762 mm Model 756 mm 914 mm Model 908 mm

DUAL INSTALLATION

For dual installations, refer to the illustration for panel heights and the chart below for panel widths.

PANEL WIDTH

MODEL W

457 mm Model 452 mm 610 mm Model 605 mm 762 mm Model 757 mm 914 mm Model 910 mm

40 | English

INTEGRATED REFRIGERATION

Custom Panels

BUILT-IN PRO 48 INTEGRATED WINE

DOOR PANEL HEIGHT

The height of the custom door panel can extend beyond the typical panel height, provided it does not exceed the weight limit. Refer to the illustration below.

45

2134

mm

3 mm

mm

DOOR PANEL

HINGE

A DECORATIVE VALANCE

CANNOT EXTEND

BEYOND THIS PLANE

610 mm

TO BACK OF UNIT

TOE KICK CLEARANCE

The height of the toe kick area can extend beyond the typical toe kick height, provided it does not exceed the dimensions in the illustration below. Toe kick heights from 51 mm to 98 mm require a reduced toe kick accessory available through an authorized Sub-Zero dealer.

VENTED

LOUVERS

610 mm

TO BACK OF UNIT

29 mm

MAX

TOE KICK

ADJUSTMENT

A DECORATIVE TOE KICK

CANNOT EXTEND

BEYOND THIS PLANE

51 mm*

TO

152 mm

FROM

FLOOR

HINGE

DOOR

PANEL

Upper valance (column and tall)—side view.

*51 mm to 98 mm requires sales accessory.

Toe kick—side view.

subzero.com | 41

INTEGRATED REFRIGERATION

Standard Handles

Optional stainless steel tubular and pro handles are available through an authorized Sub-Zero dealer.

Refer to the chart below for standard handle lengths for integrated models.

HANDLE LENGTH

INTEGRATED TUBULAR PRO

Column Door 1273 mm 1229 mm Tall Door 845 mm 800 mm 762 mm Drawer 692 mm 648 mm 914 mm Drawer 845 mm 800 mm

WINE INTEGRATED PRO 48 BUILT-IN

42 | English

INTEGRATED REFRIGERATION

BUILT-IN PRO 48 INTEGRATED WINE

Maximum Door Opening

FULL-SCALE TEMPLATE

As the panel width and/or depth increases, so does the potential for panel interference. Interference may be minimized by utilizing the 90° door stop.

3 mm REVEAL

POTENTIAL

INTERFERENCE

ADJACENT

CABINETRY

19 mm PANEL

DOOR OPEN

MAXIMUM 105°

DOOR CLOSED

19 mm PANEL

25 mm0

SCALE

Maximum door opening (top view).

POTENTIAL INTERFERENCE

subzero.com | 43

WINE STORAGE

Wine Storage

Wine nds a well-deserved place of honor in a Sub-Zero wine storage unit. Every detail is designed to ensure better wine preservation. Cherrywood-faced racks, soft lighting, custom cabinetry if desired—Sub-Zero helps make a wine collection an element of beauty in the home.

WINE STORAGE MODELS

KEY FEATURES

• Integrated, overlay, ush inset and stainless steel design

options.

• Full-view glass door standard on all models.

• Discreet interior lighting with illuminated display rack for

prized bottles of wine.

• Two independent storage zones maintain temperature,

humidity and UV protection.

• Full extension, cherrywood-faced wine racks for easy

access.

• Wine racks accommodate 750 ml bottles, half-bottles

and magnums.

• Inventory system helps organize wine collection.

• Freestanding model ICB424FSG does not require panels

or surrounding cabinetry.

• Model ICBIW-30R features two refrigerator storage

drawers.

WINE INTEGRATED PRO 48 BUILT-IN

ICB424G

ICBIW-18

ICB424FSG

ICBIW-24

ICBIW-30

ICBIW-30R

ICBWS-30

44 | English

WINE STORAGE

Overall Dimensions

BUILT-IN PRO 48 INTEGRATED WINE

MODEL ICB424G

606 mm 610 mm

864 mm

102 mm

645 mm

MODEL ICB424FSG

616 mm 625 mm

868 mm

102 mm

645 mm

44 mm

SPECIFICATIONS

STORAGE CAPACITY BOTTLES (750 ML)

ICB424G 46 ICB424FSG 46

44 mm

Freestanding model ICB424FSG has a nished stainless steel exterior and handles.

Overall dimensions are based on the stainless steel model. Refer to page 65 for door clearance information.

subzero.com | 45

WINE STORAGE

W

OPENING WIDTH

876 mm

OPENING

HEIGHT

610 mm

OPENING

DEPTH

TOP VIEW

SIDE VIEW FRONT VIEW

Opening Dimensions

MODEL ICB424G

OPENING WIDTH

MODEL W

ICB424G 610 mm

WINE INTEGRATED PRO 48 BUILT-IN

46 | English

WINE STORAGE

1765

mm

W 610 mm

2134

mm*

114 mm

92 mm

*2121 mm

MIN TO 2146 mm MAX

A

B

45 mm

451 mm

W 610 mm

2134

mm*

268 mm

1140

mm

338 mm

114 mm

92 mm

*2121 mm MIN TO 2146 mm MAX

10 mm

A

B

45 mm

Overall Dimensions

BUILT-IN PRO 48 INTEGRATED WINE

COLUMN

TALL

COLUMN

MODEL W A B

ICBIW-18 457 mm 64 mm 419 mm ICBIW-24 610 mm 102 mm 572 mm ICBIW-30 762 mm 143 mm 724 mm

TALL

MODEL W A B

ICBIW-30R 762 mm 143 mm 724 mm

IMPORTANT NOTE: Overall dimensions do not include panels

or handles. Dimensions will vary with panel thickness.

subzero.com | 47

WINE STORAGE

Specications

INTERIOR CAPACITY

COLUMN BOTTLES (750 ML)

ICBIW-18 59 ICBIW-24 102 ICBIW-30 146

TALL R (L) BOTTLES (750 ML)

ICBIW-30R 113 86

WINE INTEGRATED PRO 48 BUILT-IN

48 | English

WINE STORAGE

NOTE: 89 mm

SIDE

Opening Dimensions

INTEGRATED WINE STORAGE

635 mm

OPENING

DEPTH

BUILT-IN PRO 48 INTEGRATED WINE

OPENING DIMENSIONS

COLUMN W H

ICBIW-18 457 mm 2134 mm ICBIW-24 610 mm 2134 mm ICBIW-30 762 mm 2134 mm

TALL W H

ICBIW-30R 762 mm 2134 mm

TOP VIEW

The depth of each integrated (ICBIW) model is 610 mm. Allow for panel thickness when planning the nished opening depth. A minimum 89 mm nished return is required on all sides of the opening. Framed cabinets will require additional nished ller material behind the face frame for a proper installation. Refer to the illustration.

H

OPENING

HEIGHT

VIEW

finished returns will be visible and should be finished to match cabinetry.

19

mm

89 mm

FINISHED

RETURN

TYPICAL

OPENING WIDTH

FRONT VIEW

89 mm

FINISHED

RETURN

DUAL INSTALLATION

W

The unit can be installed next to an integrated refrigeration model or another integrated wine storage model in a dual installation. When installing two units side by side, the opening width is the width of the two units added together. A dual installation kit will be required for this installation. If a dual installation kit is not specied, a minimum 51 mm ller strip is required between units.

Dual installation kits are available through an authorized Sub-Zero dealer. For questions regarding the installation, contact your authorized Sub-Zero dealer.

FILLER

W W

FRAMELESS CABINETRY

FRAMED CABINETRY

subzero.com | 49

WINE STORAGE

762 mm

2134

mm

102 mm

1873

mm

606 mm

796 mm

432 mm

606 mm

60 mm

HEIGHT DIMENSIONS ± 13 mm

665 mm

Overall Dimensions

MODEL ICBWS-30

Opening Dimensions

MODEL ICBWS-30 STANDARD INSTALLATION

610 mm

OPENING

DEPTH

TOP VIEW

2127 mm

OPENING

HEIGHT

OPENING WIDTH

W

SPECIFICATIONS

STORAGE CAPACITY BOTTLES (750 ML)

ICBWS-30 147

Overall dimensions are based on the stainless steel model. For ush inset applications, add 13 mm to door clearance

WINE INTEGRATED PRO 48 BUILT-IN

dimensions.

FRONT VIEWSIDE VIEW

NOTE: Shaded line represents profile of unit.

OPENING WIDTH

MODEL W

ICBWS-30 749 mm

If a 2108 mm grille height is specied, the opening height must be decreased by 22 mm. If a 2235 mm grille height is specied, the opening height must be increased by 102 mm.

If two units are installed side by side, refer to page 52 for dual standard installations.

50 | English

WINE STORAGE

*

NOTE: Shaded line represents profile of unit with

SIDE

Opening Dimensions

MODEL ICBWS-30 FLUSH INSET INSTALLATION

665 mm

FLUSH INSET

DEPTH

56

mm

TOP VIEW

FINISHED

CLEATS*

BUILT-IN PRO 48 INTEGRATED WINE

6 mm

2134 mm

FLUSH

INSET

HEIGHT

VIEW

76 mm typical depth. Shaded areas will be visible and should be finished to match cabinetry.

32 mm

FLUSH INSET WIDTH

19 mm panel.

W

FRONT VIEW

102 mm

32

mm

76

mm*

TYPICAL

56

mm

FLUSH INSET WIDTH

MODEL W

ICBWS-30 813 mm

Dimensions assume a 19 mm panel thickness.

If a 2108 mm grille height is specied, the ush inset height must be decreased by 22 mm. If a 2235 mm grille height is specied, the ush inset height must be increased by 102 mm.

If two units are installed side by side, refer to page 53 for dual ush inset installations.

subzero.com | 51

NOTE: Shaded line represents profile of unit.

SIDE

WINE STORAGE

Opening Dimensions

MODEL ICBWS-30 DUAL STANDARD INSTALLATION

610 mm

OPENING

DEPTH

TOP VIEW

VIEW

2127 mm

OPENING

HEIGHT

OPENING WIDTH

MODELS W

ICBWS-30 and 762 mm Built-In 1518 mm ICBWS-30 and 914 mm Built-In 1670 mm

W

FRONT VIEW

A dual installation kit will be required for this installation.

WINE INTEGRATED PRO 48 BUILT-IN

52 | English

*

NOTE: Shaded line represents profile of unit with

SIDE

WINE STORAGE

Opening Dimensions

MODEL ICBWS-30 DUAL FLUSH INSET INSTALLATION

665 mm

FLUSH

INSET

DEPTH

56

mm

TOP VIEW

FINISHED

CLEATS*

BUILT-IN PRO 48 INTEGRATED WINE

6 mm

2134 mm

FLUSH

INSET

HEIGHT

VIEW

76 mm typical depth. Shaded areas will be visible and should be finished to match cabinetry.

19 mm panel.

32 mm

FLUSH INSET WIDTH

FRONT VIEW

W

32

mm

102 mm

76

mm*

TYPICAL

56

mm

FLUSH INSET WIDTH

MODELS W

ICBWS-30 and 762 mm Built-In 1581 mm ICBWS-30 and 914 mm Built-In 1734 mm

Dimensions assume a 19 mm panel thickness. A dual installation kit will be required for this installation.

subzero.com | 53

WINE STORAGE

Electrical

The electrical supply must be located within the shaded area shown in the illustration for your specic model. For integrated (ICBIW) models, also refer to the chart. A separate circuit, servicing only this appliance is required. A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation.

If the unit will be connected to a home security system, allow 914 mm of excess wiring for proper connection.

Installation must comply with all applicable electrical codes.

ELECTRICAL REQUIREMENTS

Power Supply 220-240 V AC, 50/60 Hz

Circuit Breaker 10 amp

Receptacle grounding-type (earthed)

LEFT SIDE

OF OPENING

51

mm

394 mm

E

FLOOR

76 mm

178 mm

1918 mm

FROM FLOOR

RIGHT SIDE

OF OPENING

E

152 mm

ELECTRICAL SUPPLY LOCATION

MODEL A

ICBIW-18 152 mm ICBIW-24 241 mm ICBIW-30, ICBIW 30R 318 mm

LEFT SIDE

OF OPENING

114 mm

6 mm

A

E

FLOOR

108 mm

Integrated (ICBIW) models.

Model ICB424G.

Model ICBWS-30.

WINE INTEGRATED PRO 48 BUILT-IN

54 | English

A

WINE STORAGE

BUILT-IN PRO 48 INTEGRATED WINE

Custom Panels

For overlay, integrated and ush inset applications, custom door panels must be provided. Handle hardware must also be provided for overlay, integrated and ush inset applications. Refer to panel requirements and custom panel dimensions charts for your specic model and design application.

Do not install a solid panel on a glass door unit. A solid door is available as a sales accessory (except model ICBWS-30) and must be installed if a solid panel is being specied. Service may be required to install the door. Contact an authorized Sub-Zero dealer for more information. Overall dimensions are the same for glass and solid door panels.

Finish all sides of the custom panels. They may be visible when the door is open or through the window of glass door models.

Model ICB424FSG has a nished stainless steel exterior that is designed to be used in a freestanding application.

Custom Panels—ICB424G

For model ICB424G, the custom door panel will attach directly to the door frame with screws through a series of pre-drilled holes.

Refer to the charts for panel requirements and dimensions.

PANEL REQUIREMENTS

PANEL WEIGHT MAX

ICB424G 5 kg

PANEL THICKNESS MIN

ICB424G 16 mm

OVERLAY PANEL DIMENSIONS

AA

ICB424G

H

A

W

PANEL DIMENSIONS

MODEL W H

ICB424G 603 mm 764 mm

STILES / RAILS (MIN) A

ICB424G 57 mm

DOOR CLEARANCE

Model ICB424G can be installed ush with surrounding cabinetry. Depending on the thickness of the overlay door panel, it may be necessary to install the unit 6 mm beyond the front surface of adjacent cabinetry to prevent interference when the door is opened to 145°. Refer to the fullscale template on page 65.

subzero.com | 55

WINE STORAGE

Custom Panels—Integrated Models

For integrated (ICBIW) models, custom door panels and handle hardware must be provided. Refer to the panel requirements chart and typical panel dimensions.

Do not install a solid panel on the glass door unit. A solid door is available as a sales accessory through an authorized Sub-Zero dealer.

The thickness of the custom panel can vary. A minimum 16 mm thick panel is required, but the thickness can be increased provided it does not exceed the weight limit. The depth of each integrated model is 610 mm. Allow for panel thickness when planning the nished opening depth. Refer to the full-scale template on page 43.

CAUTION

As reveals between cabinetry and the unit decrease, severe nger pinching can occur while door is closing.

Finish all sides of custom panels. They will be visible when the door/drawer is open.

D-style handles are recommended. Door handles must be located near the edge of the panel opposite the hinge and should be centered top to bottom. Drawer handles must be located near the top edge of each panel. Stainless steel tubular and pro handles are avail able through an authorized Sub-Zero dealer.

PANEL REQUIREMENTS

STILES / RAILS WIDTH

Stiles 83 mm Top Rail 197 mm Bottom Rail 241 mm Bottom Rail (ICBIW-30R) 114 mm

PANEL WEIGHT MAX

Door Frame 16 kg Door Frame (ICBIW-30R) 11 kg Drawer Panel 7 kg

PANEL THICKNESS MIN

All Panels 16 mm

TYPICAL PANEL DIMENSIONS

1254

mm

345 mm

424 mm

Column

2029

mm

W

Tall

Typical panel dimensions are based on a 2134 mm nished height, 102 mm toe kick and 3 mm reveals. Panel dimensions must be adjusted accordingly for all other installations. Refer to the illustration for panel heights and the chart below for panel widths.

PANEL WIDTH

MODEL W

ICBIW-18 451 mm ICBIW-24 603 mm ICBIW-30, ICBIW-30R 756 mm

DUAL INSTALLATION

For dual installations, refer to the illustration for panel heights and the chart below for panel widths.

PANEL WIDTH

MODEL W

ICBIW-18 452 mm ICBIW-24 605 mm ICBIW-30, ICBIW-30R 757 mm

WINE INTEGRATED PRO 48 BUILT-IN

56 | English

WINE STORAGE

Custom Panels—Integrated Models

BUILT-IN PRO 48 INTEGRATED WINE

DOOR PANEL HEIGHT

The height of the custom door panel can extend beyond the typical panel height, provided it does not exceed the weight limit. Refer to the illustration below.

45

mm

3 mm

DOOR PANEL

2134

mm

HINGE

Upper valance—side view.

A DECORATIVE VALANCE

CANNOT EXTEND

BEYOND THIS PLANE

610 mm

TO BACK OF UNIT

TOE KICK CLEARANCE

The height of the toe kick area can extend beyond the typical toe kick height, provided it does not exceed the dimensions in the illustration below. Toe kick heights from 51 mm to 98 mm require a reduced toe kick accessory available through an authorized Sub-Zero dealer. For questions regarding the installation, contact your authorized Sub-Zero dealer.

VENTED

LOUVERS

610 mm

TO BACK OF UNIT

29 mm

MAX

TOE KICK

ADJUSTMENT

A DECORATIVE TOE KICK

CANNOT EXTEND

BEYOND THIS PLANE

51 mm*

TO

152 mm

FROM

FLOOR

HINGE

DOOR

PANEL

*51 mm to 98 mm requires sales accessory.

Toe kick—side view.

subzero.com | 57

WINE STORAGE

AA

Custom Panels—ICBWS-30

OVERLAY PANELS

Overlay panels are typically created by combining a 19 mm custom panel, a 3 mm spacer panel and a 6 mm backer panel. Refer to the illustrations below.

PANEL REQUIREMENTS

PANEL WEIGHT MAX

Door 34 kg Grille 6 kg

PANEL THICKNESS MIN

Overlay 16 mm

SPACER PANEL

CUSTOM PANEL

BACKER PANEL

TRIM

DOOR FRAME

8 mm min

3 mm

GLASS

Panel assembly cross section (overlay).

CUSTOM

PANEL

19

mm

TYPICAL

mm

SPACER

PANEL

BACKER

PANEL

6 mm

3

Panel assembly rear view.

OVERLAY PANEL DIMENSIONS

H

A

H

A

W

ICBWS-30

OVERLAY PANELS

DOOR W H

Overlay Panel 762 mm 1772 mm Spacer Panel 740 mm 1751 mm Backer Panel 756 mm 1767 mm

STILES / RAILS A

Minimum 83 mm

GRILLE W H

Overlay Panel 762 mm 235 mm* Spacer Panel 740 mm 211 mm Backer Panel 756 mm 227 mm

*Panel height may be increased by 11 mm to hide upper main frame.

Grille panel dimensions are for standard 2134 mm overall unit height. For 2108 mm height, subtract 25 mm from grille panel height dimensions and for 2235 mm height, add 102 mm. A specic panel grille must be ordered for a 2108 mm or 2235 mm overall unit height.

WINE INTEGRATED PRO 48 BUILT-IN

58 | English

WINE STORAGE

AA

Custom Panels—ICBWS-30

BUILT-IN PRO 48 INTEGRATED WINE

FLUSH INSET PANELS

The ush inset application is an overlay model with ush inset panels. It is not a separate model.

The ush inset design allows custom panels to be installed ush with adjacent cabinets. Similar to overlay, ush inset panels are typically created by combining a 19 mm custom panel, a 3 mm spacer panel and a 6 mm backer panel. Refer to the illustrations for overlay panels on the previous page.

For ush inset panels thicker than 19 mm, a 90° door stop may be required to prevent interference with adjacent cabinets. Refer to the full-scale template on page 68.

PANEL REQUIREMENTS

PANEL WEIGHT MAX

Door 34 kg Grille 6 kg

PANEL THICKNESS MIN

Flush Inset 16 mm

FLUSH INSET PANEL DIMENSIONS

H

A

H

A

W

ICBWS-30

FLUSH INSET PANELS

DOOR W H

Flush Inset Panel 787 mm 1772 mm Spacer Panel 740 mm 1751 mm Backer Panel 756 mm 1767 mm

STILES / RAILS A

Minimum 95 mm

GRILLE W H

Flush Inset Panel 787 mm 235 mm Spacer Panel 740 mm 211 mm Backer Panel 756 mm 227 mm

Grille panel dimensions are for standard 2134 mm overall unit height. For 2108 mm height, subtract 25 mm from grille panel height dimensions and for 2235 mm height, add 102 mm. A specic panel grille must be ordered for a 2108 mm or 2235 mm overall unit height.

subzero.com | 59

WINE STORAGE

6 mm

REVEAL

8 mm

3 mm

DOOR DOOR

TOP VIEW

16

mm

8 mm

13

mm

13 mm

2

mm

8

mm

8

mm

4

mm

GRILLE

DOOR

6 mm

REVEAL

8 mm

3 mm

FLUSH INSET PANEL

SPACER

BACKER

DOOR DOOR

DOOR / DRAWER / GRILLE

TOP VIEWTOP VIEW

SIDE VIEW

CABINETRY

6 mm

REVEAL

8 mm

3 mm

DOOR DOOR

TOP VIEWTOP VIEW

13 mm

2

mm

8

mm

8

mm

4

mm

GRILLE

DOOR

6 mm

REVEAL

8 mm

3 mm

DOOR DOOR

TOP VIEWTOP VIEW

Custom Panels—ICBWS-30

FLUSH INSET PANEL OFFSETS

The illustrations provide panel offsets and reveals for model ICBWS-30 in a ush inset application. Refer to the chart below for reference to the illustrations.

PANEL OFFSET

FLUSH INSET ILLUS

Door / Grille Sides A Grille Top B Grille Bottom / Door Top C Door Bottom D

DOOR / DRAWER / GRILLE

TOP VIEW

CABINETRY

13 mm

BACKER

SPACER

FLUSH INSET PANEL

Illus. A

GRILLE

DOOR

Illus. C

8 mm

CABINETRY

16

mm

8

mm

4

mm

8

mm

SIDE VIEW

13

mm

13 mm

2

Illus. B

Illus. D

GRILLE

DOOR /

DRAWER

SIDE VIEW

3

mm

8

mm

SIDE VIEW

8

mm

2

WINE INTEGRATED PRO 48 BUILT-IN

60 | English

WINE STORAGE

AA

Custom Panels—ICBWS-30

BUILT-IN PRO 48 INTEGRATED WINE

DUAL INSTALLATIONS

If two models ICBWS-30 or a model ICBWS-30 and built-in unit are installed side by side, a dual installation kit may be required. Installations without a custom ller strip require a dual installation kit. If a dual installation kit is not specied, a 51 mm ller strip is recommended between units. Dual installations without a ller strip can only be accomplished using two units with opposite hinges. Refer to the illustrations below.

Dual installation kits are available through an authorized Sub-Zero dealer. For questions regarding the installation, contact your authorized Sub-Zero dealer.

For dual standard installations, panel dimensions are the same as for single installations. Panel dimensions and offsets for dual ush inset installations are listed on the following pages.

DUAL FLUSH INSET PANEL DIMENSIONS

H

A

H

A

W

ICBWS-30

MODEL ICBWS-30

DOOR W H

Flush Inset Panel 775 mm 1772 mm Spacer Panel 740 mm 1751 mm Backer Panel 756 mm 1767 mm

STILES / RAILS A

Minimum 95 mm

GRILLE W H

Flush Inset Panel Spacer Panel Backer Panel

775 mm 235 mm

740 mm 211 mm

756 mm 227 mm

WITHOUT FILLER STRIP

Opposite hinges.

Same side hinges.

FILLER STRIP

Grille panel dimensions are for standard 2134 mm overall unit height. For 2108 mm height, subtract 25 mm from grille panel height dimensions and for 2235 mm height, add 102 mm. A specic panel grille must be ordered for a 2108 mm or 2235 mm overall unit height.

subzero.com | 61

WINE STORAGE

6 mm

REVEAL

8 mm

3 mm

DOOR DOOR

TOP VIEW

16

mm

8 mm

13

mm

13 mm

2

mm

8

mm

8

mm

4

mm

GRILLE

DOOR

6 mm

REVEAL

8 mm

3 mm

FLUSH INSET PANEL

SPACER

BACKER

DOOR DOOR

DOOR / DRAWER / GRILLE

TOP VIEWTOP VIEW

SIDE VIEW

CABINETRY

6 mm

REVEAL

8 mm

3 mm

DOOR DOOR

TOP VIEWTOP VIEW

13 mm

2

mm

8

mm

8

mm

4

mm

GRILLE

DOOR

6 mm

REVEAL

8 mm

3 mm

DOOR DOOR

TOP VIEWTOP VIEW

Custom Panels—ICBWS-30

DUAL FLUSH INSET PANEL OFFSETS

The illustrations provide panel offsets and reveals for model ICBWS-30 in a dual ush inset application. Refer to the chart below for reference to the illustrations.

PANEL OFFSET

DUAL FLUSH INSET ILLUS

Door (hinge) / Grille Sides A Door (handle) Sides B Grille Top C Grille Bottom / Door Top D Door Bottom E

DOOR / DRAWER / GRILLE

BACKER

SPACER

TOP VIEW

CABINETRY

DOOR DOOR

TOP VIEW

DUAL TRIM

FLUSH INSET PANEL

8 mm

16

mm

13

mm

Illus. A

CABINETRY

13 mm

3

GRILLE

mm

8

mm

SIDE VIEW

Illus. C

DOOR /

DRAWER

mm

8

8 mm

Illus. B

Illus. D

3 mm

GRILLE

DOOR

6 mm

REVEAL

8

mm

8

mm

SIDE VIEW

4

13 mm

2

WINE INTEGRATED PRO 48 BUILT-IN

62 | English

Illus. E

SIDE VIEW

mm

2

WINE STORAGE

2134

mm

610 mm

OPTIONAL

TOE KICK CUT-OUT

102 mm

48 mm

25 mm

ROUT TO 3 mm

FRONT

OF SIDE

PANEL

67 mm

MAIN

FRAME

SIDE PANEL

ROUTING

25 mm

48 mm

3 mm

13 mm

BUILT-IN PRO 48 INTEGRATED WINE

Custom Panels—ICBWS-30

SIDE PANEL

The custom side panel must be a minimum of 610 mm deep and 13 mm thick. Routing will be necessary for the side panel to t ush against the side of the unit. Refer to the illustrations below.

When installing model ICBWS-30 with a custom side panel, an accessory kit is required. Stainless steel and white enamel side panels are available through an authorized SubZero dealer.

Standard Handles

Optional stainless steel tubular and pro handles are available through an authorized Sub-Zero dealer.

Refer to the chart below for standard handle lengths for wine storage models.

HANDLE LENGTH

WINE STORAGE TUBULAR PRO

ICB424G Door 616 mm 572 mm ICBIW-18 Door 1273 mm 1229 mm ICBIW-24 Door 1273 mm 1229 mm ICBIW-30 Door 1273 mm 1229 mm ICBIW-30R Door 845 mm 800 mm ICBIW-30R Drawer 616 mm 572 mm ICBWS-30 Door 1622 mm 1147 mm

Side panel dimensions.

Routing detail.

subzero.com | 63

WINE STORAGE

Wine Rack Wood Facing

FULL-SCALE TEMPLATE

The natural cherrywood facing on wine storage racks can be stained and sealed, or replaced with wood more complementary to surrounding cabinetry. Refer to the full-scale template below for prole dimensions of the wood facing and the chart for width.

13

mm

3 mm

6

mm

38

27

mm

9

mm

2 mm 14

14

mm

9

mm

16

mm

3 mm

21

mm

2 mm

WOOD FACING WIDTH

MODEL WIDTH

ICB424G, ICB424FSG 495 mm ICBIW-18 295 mm ICBIW-24 448 mm ICBIW-30, ICBIW-30R 600 mm ICBWS-30 624 mm

WINE INTEGRATED PRO 48 BUILT-IN

IW-18, IW-24,

IW-30, IW-30R

Wine rack wood facing prole.

424G, 424FSG,

WS-30

64 | English

WINE STORAGE

Door Clearance—ICB424G

FULL-SCALE TEMPLATE

To allow for a 145° door opening, the unit should extend a minimum of 6 mm beyond the front surface of adjacent cabinetry. The unit can be installed ush, however, there is potential for interference with the panel if the door is opened past 90°.

BUILT-IN PRO 48 INTEGRATED WINE

UNDERCOUNTER

UNIT

DOOR CLOSED

19 mm DOOR PANEL

13

mm

ADJACENT

3

mm

CABINETRY

6 mm

25 mm0

SCALE

145° door opening (top view).

HINGE AT 145°

OPENING

(DOOR OPENS PAST 145°)

subzero.com | 65

WINE STORAGE

Overlay and Flush Inset Panels—ICBWS-30

FULL-SCALE TEMPLATE

Overlay and ush inset panels must be a minimum of 16 mm thick to support mounting the handle. Panel thickness does not include backer and spacer panel. Mount handle close to the opening edge of the door.

25

mm

6 mm BACKER PANEL

DOOR

DEPTH OF TUBULAR AND PRO HANDLES

51

mm

76

mm

3 mm

SPACER PANEL

32 mm PANEL

25 mm PANEL

19 mm PANEL

Overlay and ush inset panel thickness.

WINE INTEGRATED PRO 48 BUILT-IN

66 | English

WINE STORAGE

606 mm

TO REAR OF UNIT

OVERALL WIDTH OF UNIT

32 mm

38 mm

44 mm

0 mm

25 mm

51 mm

57 mm

63 mm

70 mm

76 mm

83 mm

89 mm

6 mm

13 mm

19 mm

THICK OVERLAY PANEL

(TYPICAL)

6 mm

BACKER PANEL

25 mm

THICK PANEL

Overlay Application—ICBWS-30

FULL-SCALE TEMPLATE

BUILT-IN PRO 48 INTEGRATED WINE

90° door opening (top view).

25 mm0

SCALE

subzero.com | 67

WINE STORAGE

Flush Inset Application—ICBWS-30

FULL-SCALE TEMPLATE

For panels thicker than 19 mm, a 90° door stop may be required to prevent interference with adjacent cabinets.

610 mm

TO BACK WALL

32 mm

56 mm

ASSUMES

19 mm

FLUSH INSET

PANEL

THICKNESS

25 mm

THICK PANEL

19 mm

THICK FLUSH INSET PANEL

(TYPICAL)

6 mm

BACKER PANEL

WINE INTEGRATED PRO 48 BUILT-IN

110° door opening (top view).

68 | English

25 mm0

SCALE

WINE STORAGE

BUILT-IN PRO 48 INTEGRATED WINE

FILLER STRIP

32 mm

APPROX PROFILE OF

STAINLESS STEEL WRAPPED

DOOR AND HANDLE

Dual Standard Installation—ICBWS-30

FULL-SCALE TEMPLATE

Typical overlay or stainless steel dual installation with ller strip at maximum 110° door opening. Panel thickness may require a 90° door stop.

DOOR

CLOSED

DOOR

OPEN 110°

25 mm0

SCALE

Dual standard installation (top view).

subzero.com | 69

WINE STORAGE

FILLER STRIP

38 mm

PROFILE OF

AND TUBULAR HANDLE

FLUSH INSET PANEL

19 mm

Dual Flush Inset Installation—ICBWS-30

FULL-SCALE TEMPLATE

Typical ush inset dual installation with ller strip at maximum 110° door opening. Panel thickness may require a 90° door stop.

13 mm

DOOR

CLOSED

DOOR

OPEN 110°

25 mm0

SCALE

WINE INTEGRATED PRO 48 BUILT-IN

Dual ush inset installation (top view).

70 | English

Sub-Zero Products Limited Warranty

INTERNATIONAL PRODUCTS

FOR RESIDENTIAL USE ONLY

FULL TWO YEAR WARRANTY

For two years from the date of original installation, your Sub-Zero product warranty covers all parts and labor to repair or replace, under normal residential use, any part of the product that proves to be defective in materials or workmanship. All service provided by Sub-Zero under the above warranty must be performed by Sub-Zero factory certied service, unless otherwise specied by Sub-Zero, Inc. Service will be provided during normal business hours.

FULL FIVE YEAR SEALED SYSTEM WARRANTY

For ve years from the date of original installation, your Sub-Zero product warranty covers all parts and labor to repair or replace, under normal residential use, the compressor, condenser, evaporator, drier and all connecting tubing that prove to be defective in materials or workmanship. All service provided by Sub-Zero under the above warranty must be performed by Sub-Zero factory certied service, unless otherwise specied by Sub-Zero, Inc. Service will be provided during normal business hours.

subzero.com | 71

SUB-ZERO, INC.

P O BOX 44848

MADISON, WI 53744 USA

WWW.SUBZERO.COM

ISZDG 3/2015