Sub-Zero BI-36RG Quick Reference Guide
In a dual installation with all freezer Model
BI-36F, the all refrigerator Model BI-36RG
with glass door offers maximum refrigeration capacity with a contemporary look.
The new air purification system continuously scrubs odors, bacteria, ethylene gas
and contaminants to keep food fresh.
Framed, overlay/flush inset and stainless
steel models are available. A new flush
inset installation option allows the unit to
sit flush with surrounding cabinetry.
New Built-In Model BI-36RG
All Refrigerator with Glass Door
Interior Features
Refrigerator
23.5 cu ft Capacity
Air Purification System
4 Adjustable Glass Shelves
1 Stationary Glass Shelf
1 High-Humidity Drawer with Dividers
2 Storage Drawers with Dividers
Triple-Pane UV-Resistant Glass Door
Framed Model BI-36RG with panel grille, in a dual installation with Model BI-36F.
Accessories
Louvered, panel and stainless steel grilles
for 83", 84" and 88" finished heights
Stainless steel front panels for framed and
flush inset applications with stainless steel
finish and handle options
Side panels in classic stainless steel and
white
Stainless steel tubular, pro or curved
handles and full-length extended handles
Dozen egg container with lid
Dual installation kit
90° door stop kit
Accessories are available through your Sub-Zero
dealer. To obtain local dealer information, visit the
Showroom Locator section of our website,
subzero.com.
Features
Framed, overlay/flush inset and
stainless steel design applications
Flush inset installation option allows unit
to sit flush with surrounding cabinetry
Triple-pane, UV-resistant glass door
Air purification system
Flip-up grille for easy access to condenser
Evenly-distributed bright interior lighting
Adjustable, spill-proof glass shelves
Door shelves are adjustable in one-inch
increments
Crisper and deli drawers form a special
low-temperature zone
Informational freshness cards inside unit
Exceeds tough Department of Energy
standards
This appliance is certified by Star-K
to meet strict religious regulations in
conjunction with specific instructions
found on www.star-k.org.
Flip-Up Grille Air Purification System
Model Options
BI-36RG/F BI-36RG/O BI-36RG/S/TH BI-36RG/S/PH BI-36RG/S/CH
Design Framed Overlay/Flush Inset Stainless Stainless Stainless
Grille Louvered Panel Stainless Stainless Stainless
Handle Full-Length * Tubular Pro Curved
*Handle not included to allow for design flexibility.
Model BI-36R shown.
Installation Notes
Built-In models may be used in a standard
installation or in a flush inset installation which
allows the unit to be flush with surrounding
cabinetry.
Built-In all refrigerator and all freezer models
with opposite hinges can be used in a dual
installation.
Complete installation specifications, including
panel sizes, can be found on our website,
subzero.com.
Specifications
Overall Dimensions 36"W x 84"H x 24"D
Door Clearance Standard 37
1
/4"
Flush Inset 373/4"
Opening Width 35
1
/2"
Flush Inset Width 38"
Opening Height 83
3
/4"
Flush Inset Height 84"
Opening Depth 24"
Flush Inset Depth 263/16"
Electrical Requirements 115 V AC, 60 Hz
15 amp circuit
Shipping Weight 400–430 lbs
Flush Inset Installation
*Dimensions based on 3/4" (19)
panels.
Built-In Model BI-36RG Installation Specifications
Standard Installation
Dimensions in parentheses are in
millimeters unless otherwise specified.
Unit dimensions may
vary by ±
1
/8" (3).
Overall Dimensions
36"
(914)
84"
(2134)
24"
(610)
237/8"
(606)
BEHIND
FRAME
36"
(914)
371/4"
(946)
351/4"
(895)
REFER TO INSTALLATION
INSTRUCTIONS FOR COMPLETE
DETAILS.
24" (610)
OPENING
DEPTH
TOP VIEW
833/4"
(2127)
OPENING
HEIGHT
24" (610)
OPENING
DEPTH
OUTLINE OF
FRAMED, OVERLAY
OR STAINLESS
STEEL MODEL
LOCATE
ELECTRICAL
WITHIN
SHADED AREA
351/2" (902)
OPENING WIDTH
7"
E
(178)
6"
(152)
751/2"
(1918)
FRONT VIEWSIDE VIEW
3
*ASSUMES
THICKNESS.
REFER TO INSTALLATION
INSTRUCTIONS FOR COMPLETE
DETAILS.
/4" (19) PANEL
24" (610)
OPENING
DEPTH
263/16" (665)
FLUSH INSET
DEPTH
1
/4" (6)
23/16"
833/4"
(2127)
OPENING
HEIGHT
(56)*
TOP VIEW
84"
(2134)
FLUSH
INSET
HEIGHT
23/16"
(56)*
23/16"
(56)
24" (610)
OPENING
DEPTH
FLUSH INSET
11/4"
(32)
OUTLINE
OF FLUSH INSET
APPLICATION WITH
3
/4" (19) PANEL
DETAIL
24" (610)
OPENING
DEPTH
11/4"
(32)
LOCATE
ELECTRICAL
WITHIN
SHADED AREA
1
/4"
(6)
351/2" (902)
OPENING WIDTH
38" (965)
FLUSH INSET WIDTH
FRONT VIEWSIDE VIEW
7"
(178)
6"
(152)
E
263/16"
(665)
FLUSH INSET
DEPTH
751/2"
(1918)
11/4"
(32)
Loading...