Sub-Zero 736TC-PS User Manual

Planning Information

Integrated Model 736TC(I)

Over-and-Under Refrigerator / Freezer

odel 736TC

M

Model 736TCI
with Ice Maker

lectronic digital

E
control panel

Adjustable spill-proof

lass shelves

g

gg container

E

High-humidity

risper drawer

c

Location of serial
number

Automatic ice maker
(Model 736TCI)

Front venting with
removable kickplate

eamless

S
molding

Adjustable dairy

ompartment

c

djustable door

A
shelves

Magnetic door /

wer gaskets

dra

Upper freezer
storage drawer

Lower freezer
storage drawer

The Sub-Zero Model 736TC and
736TCI integrated design accepts custom
wood or stainless steel door and drawer
panels. Stainless steel panels and handles
are available as sales accessories in three
finishes— classic, platinum and carbon.

Dimensions in parentheses are in
millimeters unless otherwise specified.

11/06

With the installation of a harness kit, these appliances are Star-K
compliant to meet strict religious regulations in conjunction with
specific instructions found on star-k.org. You may purchase this
harness kit through your Sub-Zero dealer. To obtain local dealer
information, visit the Locator section of our website, subzero.com.

The Integr

and figuratively

ated line of refrigeration is growing—literally

e’ve intr

. W

oduced the Model 700BC
that takes integrated refrigerator and freezer space to
the base unit and now we have grown the same
concept to 36" (914). Yes, that’s correct, the Integrated
line is not only 27" (686) wide, you can order a tall
combination unit that is 36" (914) wide.

This unit will be perfect for those smaller kitchens that
required more stor

age space than the Model 700TC

could offer.

All of the panel specifications are identical to the 27"
(686) wide tall models, except they have gr

own 9"

(229) wider.

1

DOOR MOUNTING

DETAIL

DRAWER MOUNTING

DETAIL

TOP OF
ROUGH

OPENING

7713/16"*

(1976)

341/2"*

(876)

3

/8"

(10)

131/4"

(337)

1

/2"

(13)

101/4"

(260)

203/8"

(518)

14"(356)

15/16"

(33)

93/4"

(248)

4"

(102)

80"*

(2032)

36"

(914)

24"

(610)

FRONT VIEW

SIDE VIEW

(UNIT DIMENSION) (UNIT DIMENSION)

*

1

/2" (13)

+

_

ADJUSTMENT IN LEVELING LEGS

105˚

90˚

90˚ DOOR OPENING

DOOR/ DRAWER

CLOSED

MAXIMUM DOOR OPENING

DOOR/ DRAWER

CLOSED

191/2"*

(495)34

1

/2"*

(876)

24"

(610)

347/8" (886)

7"*

(178)

*

DOOR/ DRAWER PANEL THICKNESS NOT INCLUDED – DIMENSION WILL VARY WITH INSTALLATION

TOP VIEW

Planning Information

Integrated Model 736TC(I)

FEATURES

Tall 36" (914) wide combination unit with
upper cabinet refrigerator and freezer storage
drawers

Model 736TCI has automatic ice maker

Integrated design for "point-of-use" refriger­ation anywhere in the home

Dual refrigeration system with two distinct
temperature zones ensures the freshest food
a

nd energy efficiency

Electronic digital controls are up front and
easy to use

Flat to the ceiling bright lighting in cabinet
and drawers

Door alarm will let you know with an audible
beeping if a door or drawer is left open

Adjustable, spill-proof glass shelves

Crisper with dividers is large and deep, with
smooth sides for easy cleaning

The exclusive dual-action hinge has a built-in
90˚ door stop

Meets strict Department of Energy require­ments

UL approved for US and Canada

Two, five and twelve year residential
warranty – exclusions apply; warranty
information can be found on our website,

o.com

subzer

OVERALL DIMENSIONS

Dimensions ma

y vary by ±

Dimensions in parentheses are in
millimeters unless otherwise specified.

1

/8" (3).

2

Planning Information

Integrated Model 736TC(I)

MODEL OPTIONS

T

all Combination Unit 736TC

Tall Combination Unit
with Automatic Ice Maker 736TCI

SPECIFICATIONS

M

odel 736TC(I) Upper Cabinet Refrigerator

w

ith Freezer Drawers

Overall Width 36" (914)

Overall Height 80" (2032)

Overall Depth 24" (610)

Refrigerator Capacity 13.5 cu ft (383 L)

F

reezer Capacity 6.9 cu ft (195 L)

Minimum Height (levelers in) 791/2" (2019)

PANEL OPTIONS

Integrated (custom panels)

Classic Stainless Steel Finish /S

Platinum Stainless Steel Finish /P

Carbon Stainless Steel F

Stainless steel door and drawer front
panels are ordered and shipped as sales
accessories and include tubular handles.

A CCESSORIES

inish

/B

Door and drawer front panels
with tubular handles in classic,
platinum and carbon stainless
steel

Tubular handles in classic,
platinum and carbon stainless
steel and polished chr

ome

Deli drawer and shelf assembly

Dozen egg container with lid

Dual installation heater kit

Accessories are av
Sub-Zero dealer. To obtain local dealer
information, visit the Locator section of
our website

ailable through your

, subzer

o.com.

Door Clearance 341/2" (876)

awer Clearance 19

Dr

1

/2" (495)

Electrical Requirements 115 V AC, 60 Hz, 15 amp circuit

Plumbing Requirements

1

/4" copper line

Water Supply 20–100 psi

Annual Energy Usage 569 kWh / $ 52
(based on 9.06 cents per kilowatt hour)

Shipping Weight 480 lbs (218 kg)

Special Note Door and drawer panels and handles are

available in three stainless steel finishes

Specifications are subject to change without notice.

Dimensions in parentheses are in
millimeters unless otherwise specified.

3

ANTI-TIP

B

RACKET*

*PLACEMENT OF THE

ANTI-TIP BRACKET

SHOULD BE 24" (610)

FROM THE FRONT OF THE

UNIT WITHOUT PANELS

TO THE BACK OF THE

A

NTI-TIP BRACKET.

25"

(635)

36"

(914)

80"

(2032)

27"

(686)

25"

(635)

WATER LINE

BOTTOM ENTRY

LOCATION

WATER LINE

SIDE ENTRY

L

OCATIONS

11/2"

(38)

11/2"

(

38)

27"

(686)

11/2"

(

38)

20" (508) 131/2"

(343)

18" (457)

ANTI-TIP

BRACKET

18" (457)

6"

(152)

TOP VIEW TOP VIEW

SIDE VIEW FRONT VIEW

WATER LINE

SIDE ENTRY

LOCATION

ANTI-TIP

BRACKET

21/2" (64)

20" (508)

3

/4"

(19)

3"

(76)

171/2" (445) 131/2"

(343)

ANTI-TIP

BRACKET

NOTE: ANTI-TIP BRACKET MUST BE INSTALLED TO

PREVENT UNIT FROM TIPPING FORWARD

41/2"

(114)

1

/4"

(6)

LOCATE WATER LINE

(REAR ENTRY) WITHIN

SHADED AREA

LOCATE ELECTRICAL WITHIN

SHADED AREA – ORIENT GROUND

PRONG TO RIGHT AS SHOWN

Planning Information

Integrated Model 736TC(I)

INSTALLATION SPECIFICATIONS

DIMENSIONS

Finished Rough Opening Width 36" (914)

Finished Rough Opening Height 80" (2032)

inished Rough Opening Depth 25" (635)*

F

Location of Electrical Within shaded area

Location of Plumbing (Model 736TCI only)

* The depth of the Model 736TC(I) is 24" (610) from the front of the unit to its back. Your design
may necessitate moving the unit back, or cabinets forward to achieve a flush fit. This will require
a minimum r

See Installation Instructions shipped with unit for detailed specifications.

ough opening depth of 25" (635).

Within shaded area

Dimensions in parentheses are in
millimeters unless otherwise specified.

4

Planning Information

Integrated Model 736TC(I)

INSTALLATION NOTES

R

efer to the illustrations and specifications
for overall dimensions, finished rough opening
dimensions and installation specifics.

I

MPORTANT NOTE: The depth of Model
736TC (I) is 24" (610) from the front of the unit
to its back. Your design may necessitate
moving the unit back, or cabinets forward to
achieve a flush fit. This will require a minimum
rough opening depth of 25" (635). Refer to the
installation illustration on page 4.

The anti-tip bracket must be installed to

prevent the unit from tipping forward.

Integrated units are compatible with virtually
any style of cabinetry. They can be used with
framed as well as frameless cabinets.

Refer to the full-scale illustrations at the end
of this section for specifics on panels and door
openings.

3

Door panels can grow beyond 45
and exceed the 80" (2032) height to accommo­date any size of door as long as you stay below
the recommended door panel weight limit of
53 lbs (24 kg). Door panels must be a minimum

5

/8" (16) thick.

of

The weight of each dr

awer panel cannot
exceed 16 lbs (7 kg). Drawer panels must be a
minimum of

5

/8" (16) thick.

For the bottom drawer, the maximum panel

11

height is 16

/16" (424). You must keep a
minimum space of 4" (102) clear below the
bottom edge of the lower drawer panel, so the
unit can be properly vented. Any decorative
base molding must be removable for possible
servicing and cleaning of the condenser

e recommend using D-style handles, which

W
should be located on the opposite side fr
hinge, centered on the cabinet door and the top,
center area of the drawer panel.

Two Integrated units may be installed next to
one another

. Refer to page 11 for additional

information.

For Integrated models with an automatic ice
maker, rough in the water supply line. Connect a

1

/4" OD copper line to the house supply
sure to use an easily accessible shut-off valve
between the supply and the unit. This shut-off
valve should not be installed behind the unit.

/8"(1153)

.

om the

, being

D

o not use self-piercing valves. A saddle
valve kit (4200880) is available from your
Sub-Zero dealer. To obtain local dealer informa­tion, visit the Locator section of our website,
s

ubzero.com.

A line filter is required when water condi­tions have a high sediment content. The ice
maker operates on water pressure of 20 psi
(1.4 bar) to 100 psi (6.9 bar). In some cases a
reverse osmosis water filter system may not be
able to maintain the minimum water pressure
consistently.

When routing the water through the side

1

walls, you must place the water line within

/2"
(13) of the floor and as close as possible to the
back wall. The line must be routed around the
anti-tip br

acket so it clears the bracket and
leveling feet of the unit. Refer to the installation
illustration on page 4 for placement of the
water line.

Do not route water supply line in fr

ont of the
compressor tray. The tray must be slid forward
for service.

, allow for 27"

Regardless of the r

outing

(686) of excess copper tubing to remain outside

all or floor for easy connection to the unit,

the w
as shown in the installation illustration on
page 4.

A 115 volt, 6OHz, 15 amp circuit breaker and
electrical supply are required. A separate circuit,
servicing only this appliance is necessary.

All Integrated models are equipped with a
power supply cord with a 3-prong grounding
plug, which must be plugged into a mating

-

3

ong gr

pr

ounding type w

all receptacle

. The
electrical outlet must be placed so the ground­ing prong is to the right of the thinner blades.

all.

The outlet must be flush with the bac

k w
Locate electrical within the shaded area shown
in the installation illustr

ation on page 4.

Do not use an extension cord or two prong

adapter. Electrical ground is required.

You must follow all National Electrical Code

regulations. In addition, be aw

are of local codes

and ordinances when installing your service.

The Integrated Refrigeration Installation
Instructions packed with the appliance will give
you step-by-step procedures for making sure

.

the unit is installed pr

operly

Dimensions in parentheses are in
millimeters unless otherwise specified.

5