Sub Zero 7005227, 7005228, 7005226 Installation
Built-In Series Framed Door Panel Retrofit Kit
subzero.com 800.222.7820
These instructions are for side-by-side Built-In models:
▪ Kit 7005226 for BI-48S
▪ Kit 7005227 for BI-42S
▪ Kit 7005228 for BI-36S
CONTENTS
2 Hinge-side trim filler
1 Freezer door bottom trim filler
1 Refrigerator door bottom trim filler
1 Instruction sheet
REMOVE THE REFRIGERATOR DOOR HANDLE
Open the door.
1
At the top of the door, insert a flat-blade screwdriver
2
into the channel of the screw cover.
Push the screw cover away from the handle so that it
3
disengages from the handle.
Install the bottom trim filler so that it overlaps the
2
bottom door trim and hooks behind the hinge-side trim
filler
.
Install the existing 500 or 600 Series door panel.
3
Reattach the handle.
4
Reattach the scr
5
Note: Though only the freezer door is shown, the
procedure for the refrigerator door is the same.
Note: The freezer door hinge-side trim filler in the
7005228 package is 5/32" wider than the refrigerator
door hinge-side trim filler. Be sure to install the wider
trim filler onto the freezer door.
ew cover.
Use a T-20 T
4
screws.
Pull the handle from the door.
5
INSTALL THE FRAMED DOOR PANEL RETROFIT
Install the hinge-side trim filler so that it overlaps the
1
hinge-side door trim.
7004561 REVE 10/2018
orx bit to remove the handle mounting
Page 1 of 1
*7004561$REVE*
Loading...