Page 1
Planning Information
Built-In Model 648PRO
Side-by-Side Refrigerator/ Freezer
Model 648PRO
ree-Standing
F
r Built-In
o
tainless steel
S
construction
Easy-access grille
ater filter
W
larm
A
uto-close
A
inge system
h
Adjustab
steel shelves
Automatic ice
maker
le stainless
ual refrigeration
D
system
Exterior temperature
isplay
d
icroprocessor and
M
interior control panel
abbath Mode
S
djustable spill-proof
A
lass shelves
g
Slide-out stainless
steel bins
Crisper drawer
Drawers with
dividers
This appliance is certif
to meet strict r
conjunction with specific instructions
found on www.star-k.org.
The Sub-Zero Model 648PRO sideby-side refrigerator/ freezer is available
in the stainless steel design application
with classic stainless steel finish only.
Model 648PRO can be built-in or, with
the free-standing accessory kit, used in
a free-standing application.
elig
ious r
ied by Star-K
tions in
egula
Born of 100% steel (and maybe a bit of brashness),
the Model 648PRO is no less than a masterpiece of
preserv
advanced controls marry performance, and design in a
bold new way for home refrigeration. So it not only
keeps foods magnificently fresh, it keeps kitchens in
rather remarkable form. The Model 648PRO is just the
latest, sleek
rewriting the rules of preserv
ation. Its sculpted metal, dual refrigeration and
est example of how Sub-Zer
o keeps
ation and attraction.
Dimensions in parentheses are in
millimeters unless otherwise specified.
11/06
1
Page 2
Planning Information
Built-In Model 648PRO
FEATURES
Can be built-in or, with the free-standing
accessory kit, used in a free-standing
application
Dual refrigeration—two compressors and
three evaporators keep foods fresher longer
and prevent odor transfer
Exterior temperature display with easy-to-
read digital readouts, accurate within one
degree of your preset temperatures
M
icroprocessor and interior control panel
with up-front touch controls monitor
pattern-sensing defrost and automatic
service alerts
Sabbath Mode—power down one or both
sides for extended periods or just the
weekend
Slide-out stainless steel bins— two versatile,
removable bins hold small items and fit
neatly under any shelf
Crisper drawer is a touch-and-glide crisper
with a tight-seal glass lid that gives vegetables generous humidity
Drawers with dividers help you enjoy full
access to food with adjustable, removable,
and interchangeable drawer dividers
Automatic ice maker lets you retrieve filtered
ice from a stainless steel bucket
Shelves are cantilevered and spill-proof, with
stainless steel trim (refrigerator); adjustable,
removable and 100% stainless steel (freezer)
Auto-close system with an advanced hinge
design lets doors finish closing easily and
automatically
Alarm with an audible beep lets you know
when doors or drawers are left ajar
W
ater filter is easy to replace and just
b
ehind the pop-up grille
Easy-access grille pops up with a simple pull
(no tools needed) to reveal the water filter
and condenser for cleaning
Stainless steel construction and classic
finish (inside and out) for professional
strength and beauty
Advanced lighting—top LED lights bathe
upper compartments in a soft glow; the
refrigerator side has channeled sidewall
LEDs
Certified by Star-K to meet religious
regulations
UL approved for US and Canada
Two, five and twelve year residential
warranty—exclusions a
information can be found on our website,
o.com
subzer
pply; warranty
2
Page 3
Planning Information
48"
(1219)
84"
(2134)
257/8"
(657)
237/8"
(606)
305/32"
(766)
237/8"
(606)
BEHIND
FACE
FRAME
257/8"
(657)
TO FRONT
OF FACE
FRAME
283/4"
(730)
201/2" (521)
48"
(1219)
Built-In Model 648PRO
ACCESSORIES
9
0 degree door stop kit —
r
ight or left hinge
Dozen egg container with lid
Slide-out refrigerator bin
Stainless steel side panel
Free-standing kit— includes two
stainless steel side panels and
top lid
Refrigerator drawer dividers
Stainless steel front and side
toe kicks
Accessories are available through your
Sub-Zero dealer. To obtain local dealer
information, visit the Locator section of
our website, subzero.com.
SPECIFICATIONS
M
odel 648PRO Side-by-Side Refrigerator/ Freezer
Overall Width 48" (1219)
Overall Height 84" (2134)
Depth from behind face frame 23
7
/8" (606)
Depth to front of face frame 257/8" (657)
Refrigerator Capacity 18.4 cu ft (521 L)
F
reezer Capacity 11.7 cu ft (331 L)
Minimum Height (levelers in) 831/2" (2121)
Door Swing Clearance 283/4" (730)
Electrical Requirements
115 V AC, 60 Hz
15 amp dedicated circuit
Plumbing Requirements
1
/4" copper line
Water Supply 35 psi (2.4 bar) to 120 psi (8.3 bar)
Annual Energy Usage 689 kW / $ 63
(based on 9.06 cents per kilowatt hour)
Shipping Weight 860 lbs (390 kg)
Special Note Model 648PRO can also be ordered with
a glass door as Model 648PROG
OVERALL DIMENSIONS
Specifications are subject to change without notice.
Dimensions may vary by ±1/8" (3).
Dimensions in parentheses are in
millimeters unless otherwise specified.
3
Page 4
Planning Information
7
"
(178)
6"
(
152)
ROUGH
OPENING DEPTH
24" (610)
STANDARD
26" (
660)
F
LUSH
ROUGH
OPENING WIDTH
471/2" (1206) STANDARD
48" (1219) FLUSH
E
3" (76)
6"
(152)
W
LOCATE WATER SUPPLY
WITHIN SHADED AREA
L
OCATE ELECTRICAL
WITHIN SHADED AREA
53/16"
(132)
S
HUT-OFF
V
ALVE
M
IN
36"
(914)
1
/4" C
OPPER
W
ATER LINE
T
OP VIEW
ROUGH
O
PENING HEIGHT
TO FINISHED
FLOORING
833/4" (2127)
STANDARD
841/8" (2137)
FLUSH
MIN HEIGHT
R
EQUIRED
T
O FINISHED
FLOORING
(LEVELERS IN)
831/2" (2121)
STANDARD
833/4" (2127)
FLUSH
751/2"
(1918)
Built-In Model 648PRO
INSTALLATION SPECIFICATIONS
DIMENSIONS
Finished Rough Opening Width Standard 471/2" (1206)
F
Finished Rough Opening Depth Standard 24" (610)
Location of Electrical Within upper shaded area
Location of W
inished Rough Opening Height
ater Supply
Flush 48" (1219)
3
Standard 8
Flush 8
3
/4" (2127)
1
4
/8" (2137)
Flush 26" (660)
Within lower shaded area
See Installation Instructions shipped with unit for detailed specifications.
Refer to the Sub-Zero Design Guide pdf file for additional specifications.
Dimensions in parentheses are in
millimeters unless otherwise specified.
4
Page 5
Planning Information
Built-In Model 648PRO
INSTALLATION NOTES
R
efer to the illustrations and specifications
for overall dimensions, finished rough opening
dimensions and installation specifics.
M
odel 648PRO can be used free-standing or
installed as a standard or flush built-in application. For standard built-in installations, the face
frame of the unit will extend 2" (51) beyond
cabinetry. In flush built-in installations, the front
of the face frame will be flush with surrounding
cabinetry.
The depth of Model 648PRO from the back
of the unit to the front of the face frame is
7
/8" (657). In flush built-in applications, your
25
design may necessitate moving the unit back,
or cabinets forward to achieve a flush fit.
The anti-tip bracket must be installed to
prevent the unit from tipping forward.
Allow the doors to open a minimum of 90˚ or
you'll have problems removing shelves. With
the door opening at 90˚, you may have to move
shelves slightly to clear the door interior. Refer
to the minimum door swing clearance in the
specifications chart.
For corner installations, allow for a minimum
3" (76) filler so that the door can open to 90˚.
Model 648PRO comes with an automatic ice
maker and an integrated water filtration system.
This system operates on water pressure
between 35 psi (2.4 bar) and 120 psi (8.3 bar).
To rough in the water supply, connect a
copper line to the house supply, being sure to
use an easily accessible shut-off valve between
the supply and the unit.
alves. A saddle
Do not use self-pier
cing v
valve kit (4200880) is available from your
Sub-Zero dealer. To obtain local dealer information, visit the Locator section of our website,
subzero.com.
1
/4" OD
I
MPORTANT NOTE: Areverse osmosis system
can be used with Model 648PRO, provided
there is constant water pressure of 20 psi (1.4
bar) to 120 psi (8.3 bar) supplied to the unit at
a
ll times. In this application, the integrated
water filtration system must be set to bypass
mode. This is achieved by removing the water
filter cartridge. Refer to the PRO 48 Installation
Instructions packed with the unit.
The water line should be routed up through
1
the floor within
/2" (13) from the back wall and
no higher than 3" (76) off the floor. If you have
to come through the wall, make sure the water
line is no more than 3" (76) from the floor.
Locate water supply within the shaded area
shown in the Installation illustration.
Regardless of the r
outing, allow a minimum
of 36" (914) of excess copper tubing to remain
outside the wall or floor for easy connection to
the unit.
A 115 V AC, 60 Hz, 15 amp electrical supply
is required. The supply circuit for this appliance
must be protected by a 15 amp fuse or circuit
breaker. It is recommended that a separate
circuit, serving only this appliance, be provided.
IMPOR
TANT NOTE:
ound fault circuit
A gr
interrupter (GFCI) is not recommended and may
cause interruption of operation.
Model 648PRO is equipped with a 6' (1.8 m)
power supply cord with a 3-prong grounding
plug which must be plugged into a mating
3-prong grounding-type wall receptacle. Locate
electrical within the shaded area shown in the
Installation illustration.
ou must follow all National Electrical Code
Y
regulations. In addition, be aware of local codes
and ordinances when installing your service.
Refer to the PRO 48 Installation Instructions
ked with the appliance, which provides
pac
step-b
y-step pr
ocedures for making sure the
unit is installed properly.
Dimensions in parentheses are in
millimeters unless otherwise specified.
5
Loading...