Sub-Zero 642-PS User Manual

Page 1
Planning Information
Built-In Model 642
Side-by-Side Refrigerator/ Freezer
odel 642/F
M F
ramed
Model 642/O Overlay
Front venting allows unit to be completely built in
erial and model
S
umber plate
n
djustable wire
A shelves
utomatic ice
A
aker
m
ce storage
I drawer
Roll-out freezer baskets
Four-sided magnetic gaskets
Removable kickplate
(Stainless steel design shown )
Hermetically sealed refrigeration units
ighted electronic
L
ontrol panel
c
Adjustable dairy
ompartment
c
djustable roll-out
A utility basket
djustable spill-
A
roof glass shelves
p
gg tray
E
Adjustable door shelves
High humidity crisper drawer
Door closers
Model 642/S (P/B) Stainless Steel
The Sub-Zero Model 642 side-by-side refrigerator/ freezer is available in your choice of the framed, overlay or stainless steel design application. Three stainless steel finishes are offered— classic (/S), platinum (/P) and carbon (/B).
Dimensions in parentheses are in millimeters unless otherwise specified.
11/06
o obtain local dealer informa
T section of our w
ebsite, subzero.com.
ough y
our Sub-Zer
o dealer.
tion, visit the Locator
Just six inches bigger than the Model 661, the Model
. This
642 satisfies the need for additional stor midsize unit is one of the more popular Sub-Zer models of the side-by-side configuration. Storage in the doors and spacious interior seem to be everything a customer could need in their home.
age
o
1
Page 2
42"
(1067)
24"
(610)
84"
(2134)
259/16"
(649)
42"
(1067)
237/8"
(606)
BEHIND
FRAME
3
/8" (10)
FRAME EXTENSION
411/4"
(1048)
Planning Information
Built-In Model 642
FEATURES
42" (1067) wide side-by-side refrigerator/
freezer
Framed, overlay and stainless steel applica-
tions provide complete design flexibility
Sub-Zero's dual refrigeration system ensures
the freshest food and energy efficiency
Shallow-depth design means access is easy
to any area of the refrigerator
Electronic digital controls are up front and
easy to use
Bright interior lighting
Adjustable, spill-proof glass shelves
High-humidity crisper drawer is large with
smooth sides for easy cleaning – there's
even an added storage drawer
Door alarm will let you know with an audible beeping if your refrigerator or freezer door is left ajar
Automatic ice maker provides an ample supply of crescent-shaped ice
Solid core doors with magnetic gaskets and door closers
Front venting allows unit to be completely b
uilt in and serviced from the front
Meets strict Department of Energy require­ments
UL approved for US and Canada
Two, five and twelve year residential warranty – exclusions apply; warranty information can be found on our website, subzero.com
OVERALL DIMENSIONS
Stainless steel design shown.
1
±
y
ary b
Dimensions ma
Dimensions in parentheses are in millimeters unless otherwise specified.
y v
/8" (3).
2
Page 3
Planning Information
Built-In Model 642
SPECIFICATIONS
M
odel 642 Side-by-Side Refrigerator/ Freezer
Overall Width 42" (1067)
Overall Height 84" (2134)
MODEL OPTIONS
Framed Design 642/F
Overlay Design 642/O
Classic Stainless Steel 642/S
Platinum Stainless Steel 642/P
Carbon Stainless Steel 642/B
ou must allow 90 days from order to
Y delivery for platinum and carbon finishes.
A CCESSORIES
Louvered, panel or stainless steel
grilles in 1" (25) increments from
10" (254) to 15" (381) high
Front and grille panels for framed
design in white, almond and
classic stainless steel
Side panels in white, almond and
classic stainless steel
Extended framed handles
Stainless steel and polished
chrome handles for overlay design
Gallon door shelf
Dozen egg container with lid
90˚ and 105˚ door stop kits
Accessories are available through your Sub-Zero dealer. To obtain local dealer information, visit the Locator section of our website
, subzero.com.
Overall Depth 24" (610)
Refrigerator Capacity 16.2 cu ft (459 L)
F
reezer Capacity 8.2 cu ft (232 L)
Minimum Height (levelers in) 83" (2108)
Door Swing Clearance 259/16" (649)
Electrical Requirements 115 V AC, 60 Hz, 15 amp circuit
Plumbing Requirements
1
/4" copper line
Water Supply 20–100 psi
Annual Energy Usage 650 kWh / $ 59 (based on 9.06 cents per kilowatt hour)
Shipping Weight Framed – 541 lbs (245 kg)
Overlay – 541 lbs (245 kg)
Stainless Steel – 582 lbs (264 kg)
Specifications are subject to change without notice
.
Dimensions in parentheses are in millimeters unless otherwise specified.
3
Page 4
Planning Information
833/4"
(2127)
ROUGH
OPENING
HEIGHT
WITH
STANDARD
11" (279)
GRILLE
751/2"
(1918)
7"
(178)
6"
(152)
411/2"
(1054)
ROUGH OPENING WIDTH
24"
(
610)
R
OUGH
O
PENING
DEPTH
E
3"
(76)
18"
(457)
W
LOCATE WATER SUPPLY
WITHIN SHADED AREA
L
OCATE ELECTRICAL
W
ITHIN SHADED AREA
6"
(152)
S
HUT-OFF
V
ALVE
EXTEND WATER LINE
APPROX. 36" (914) FROM BACK WALL
FRONT VIEW
TOP VIEW
Built-In Model 642
INSTALLATION SPECIFICATIONS
DIMENSIONS
Finished Rough Opening Width 411/2" (1054)
Finished Rough Opening Height 833/4" (2127)
Finished Rough Opening Depth 24" (610)
Location of Electrical Within upper shaded area
Location of W
ater Supply
See Installation Instructions shipped with unit for detailed specifications. Refer to the Sub-Zero Design Guide pdf file for additional specifications.
Dimensions in parentheses are in millimeters unless otherwise specified.
Within lower shaded area
4
Page 5
Planning Information
Built-In Model 642
INSTALLATION NOTES
R
efer to the illustrations and specifications for overall dimensions, finished rough opening dimensions and installation specifics.
A
llow the doors to open a minimum of 90˚ or you'll have problems removing drawers. With the doors opening at 90˚, you may have to move drawers slightly to clear the door interior. Refer to the minimum door swing clearances in the specifications chart.
For corner installations, allow for a minimum 3" (76) filler so that the door can open to 90˚. If you're using raised panels, consider using a wider filler. A 90˚ door stop is available as an accessory.
Be sure to add the filler strip width to your finished rough opening dimension. In any side­by-side installation without a filler strip, add an additional This will allow for the proper width.
Refer to the full-scale illustrations at the end of this section for specifics on door openings and filler size alternatives.
If your client has chosen the stainless steel design, the unit will be shipped complete with wrapped stainless steel doors and handle hardware. You will not have to install front panels.
If your client has chosen the framed or overlay design, you will be adding front panels to give the unit the custom Sub-Zero look. The overlay design also allows you to add your own handles, or you may choose accessory handles available through your Sub-Zero dealer. Refer to pages 6– 10 for detailed information on adding panels.
For Built-In models with an automatic ice maker, rough in the water supply line. Connect
1
/4" OD copper line to the house supply, being
a sure to use an easily accessible shut off v between the supply and the unit.
Do not use self-piercing valves. A saddle
alve kit (4200880) is av
v Sub-Zero dealer. To obtain local dealer informa­tion, visit the Locator section of our website subzero.com.
1
/2" (13) to your combined numbers.
alve
ailable from your
,
A
line filter is required when water condi­tions have a high sediment content. The ice maker operates on water pressure of 20 psi (1.4 bar) to 100 psi (6.9 bar). In some cases a r
everse osmosis water filter system may not be able to maintain the minimum water pressure consistently.
The water line should be routed up through
1
the floor within
/2" (13) from the back wall and no higher than 3" (76) off the floor. If you have to come through the wall, make sure the water line is no more than 3" (76) from the floor. Locate water supply within the shaded area shown in the installation illustration.
Regardless of the routing, allow 3' (.9 m) of excess copper tubing to remain outside the wall or floor for easy connection to the unit.
A 115 volt, 60 Hz, 15 amp electrical supply is required. The supply circuit for this appliance must be protected by a 15 amp fuse or circuit breaker. It is recommended that a separ
ate
circuit, serving only this appliance, be provided.
All Built-In models are equipped with a 6' (1.8 m) power supply cord with a 3
-prong grounding plug which must be plugged into a mating 3
-prong grounding type wall receptacle. Locate electrical within the shaded area shown in the installation illustration.
You must follow all National Electrical Code regulations. In addition, be aware of local codes and ordinances when installing your service.
To prevent the unit from tipping forward and provide a stable installation, the unit must be secured in place with an anti-tip blocking kit. If there is a solid soffit a
bove the unit with clear
­ance between the unit and the soffit of 1" (25) or less, you won't need to block the unit.
For installations with clearances of more than 1" (25), anti-tip bloc
you must block the unit with the
king kit (wood bloc
k and hardw
are)
provided with each Built-In unit.
Refer to the
Built-In Installation Instructions packed with the appliance, which provides step-b
y-step pr
ocedures for making sure the
unit is installed properly.
Dimensions in parentheses are in millimeters unless otherwise specified.
5
Page 6
Planning Information
PANELS
1
/4" (6) THICK OR LESS
1
/4" (6) Panel
Trim reveal
1
/4" (6) min
PANELS THICKER THAN
1
/4" (6)
Trim reveal
1
/4" (6) min
Rout to 1/4" (6)
thickness
Built-In Model 642
FRAMED PANELS
ADDING PANELS
In your plan for panels, be sure you are working with the Sub-Zero panel design family called for in your design. If you have chosen the stainless steel design, the unit will be shipped complete with wrapped stainless steel doors and handle hardware. You will not have to install front door p
anels.
If you and your client have ordered a framed or overlay design model, you will be adding panels to give the unit the custom Sub-Zero look. Specifications on the following pages provide installation considerations for framed and overlay door panels.
Side panels can be used with the framed, overlay and stainless steel design applications. Refer to specifications on page 10.
Framed door panel 1/4" (6) thick or less
Framed door panel thicker than 1/4" (6)
FRAMED PANELS
If the thickness of the custom panels is less than 1/4" (6), they must be backed up with a sheet of shim material to build the total thickness to
1
than
/4" (6), an edge must be routed around the panel to
1
/4" (6). If the panel is thicker
ensure a proper fit. Refer to the illustrations on this page.
IMPORTANT NOTE: Routing, recessing or optional extended handles may be required on raised panels for finger clearance under the handle. Refer to the full-scale illustrations on pages 11–14.
IMPORTANT NOTE: The weight of each panel cannot exceed 50 lbs (23 kg).
The traditional framed models come with an 11" (279) louvered grille and elegant full-length handle
. Optional extended full-length handles that provide additional finger clearance for raised panels are available through your
Zero dealer. To obtain local dealer information, visit
-
Sub the Locator section of our website, subzero.com.
amed door panel dimensions and dimensions for the
or fr
F optional panel grille for the fr
amed a
pplication, refer to
specifications on page 7.
To install framed panels, refer to the installation instruc­tions shipped with each unit
. These instructions can also
be found on our website, subzero.com.
Dimensions in parentheses are in millimeters unless otherwise specified.
6
Page 7
Planning Information
W
14" (356)
WW
H
A
H
Built-In Model 642
FRAMED PANELS
An 11" (279) louvered grille is standard on framed applica­tions. Optional louvered grilles are available in 1" (25) height increments from 10" (254) to 15" (381).
You may choose to use Sub-Zero's optional panel grille for the framed application. Optional panel grilles are available i
n 1" (25) height increments from 10" (254) to 15" (381).
Refer to the chart below for panel dimensions.
FRAMED PANEL DIMENSIONS
WIDTH HEIGHT
Refrigerator Door Panel 24" (610) 6711/16"(1719)
Freezer Door Panel 155/8" (397) 6711/16"(1719)
Handle Recess Location A – 385/32" (969)
Maximum Weight (per panel) 50 lbs (23 kg)
FRAMED GRILLE PANEL DIMENSIONS
Framed Door Panels Framed Grille Panel
10" (254) Grille 403/16" (1021) 815/16" (227)
WIDTH HEIGHT
11" (279) Grille 403/16" (1021) 915/16" (252)
12" (305) Grille 403/16" (1021) 1015/16" (278)
13" (330) Grille 403/16" (1021) 1115/16" (303)
14" (356) Grille 403/16" (1021) 1215/16" (329)
15" (381) Grille 403/16" (1021) 1315/16" (354)
Dimensions in parentheses are in millimeters unless otherwise specified.
7
Page 8
Planning Information
Door/Drawer/
Grille Trim
1
/16" (2)
5
/32" (4)
1
/4" (6) Backer Panel
5
/16" (8) min
.
10"
(3)
Spacer Panel
Overlay Panel
Spacer Panel
Overlay Panel
1
/4" (6)
Backer
Panel
.10"
(3)
~3/4"
(19)
Built-In Model 642
OVERLAY PANELS
OVERLAY PANELS
The overlay design allows decorative panels to cover the door trim for a more seamless appearance that blends with the design of the room. To achieve this look, the most common way is to work with three panels—the decorative overlay panel, a .10" (3) spacer panel and a
1
/4" (6) backer panel. Depending on your cabinet manufacturer, this could be one panel routed for different dimensions or more likely, three different panels.
Regardless of the physical construction of the panels (routing or three panel assembly), you will need to follow the exact dimensions and panel placement to ensure a proper fit.
The top illustration on this page is a cross section view of the three panel assembly showing placement of the door / drawer/grille trim. The bottom illustration shows a rear view of the three panel assembly and critical dimen­sions, standard for all overlay models.
Three panel assembly— cross section
Three panel assembl
y— rear view
Overlay models will come with no handle hardware, because the beauty of this design is that you can match the surr
ounding cabinetry hardware. These models will come with an 11" (279) panel grille which will accept decorative panel inserts to match the look of the door panels. For overlay door and grille panel dimensions, refer to specifications on page 9.
IMPOR
TANT NOTE:
Keep in mind that the Sub-Zero door panels have the potential for hitting adjacent cabinets and/or countertops when they are opened. You need to be
are of your surrounding cabinetry and space limitations
aw when using the overlay models. Refer to the full-scale illustrations on pages 13–14.
IMPORTANT NOTE: The weight of each door panel
-
assembly cannot exceed 50 lbs (23 kg). The total thic
k
ness of all panels for an overlay model must be at least
5
/8" (16) thick.
To install overlay panels, refer to the installation instruc­tions shipped with each unit
. These instructions can also
be found on our website, subzero.com.
Do not exceed the dimensions listed for the overlay grille panel. The decorative panel cannot be any larger
estrict the air flow to the compressor area
or it ma
y r
and cause problems with the operation of the unit.
Dimensions in parentheses are in millimeters unless otherwise specified.
8
Page 9
Planning Information
WW
H
W
H
Built-In Model 642
OVERLAY PANELS
An 11" (279) panel grille is standard on overlay applica­tions. Optional panel grilles are available in 1" (25) height increments from 10" (254) to 15" (381).
OVERLAY PANEL DIMENSIONS
WIDTH HEIGHT
Refrigerator Door Panel 245/16" (618) 68" (1727) Refrigerator Door Spacer 233/8" (594) 671/16" (1703) Refrigerator Door Backer 24" (610) 6711/16" (1719)
Freezer Door Panel 1515/16" (405) 68" (1727) Freezer Door Spacer 15" (381) 671/16" (1703) Freezer Door Backer 155/8" (397) 6711/16" (1719)
Maximum Weight (per panel assembly) 50 lbs (23 kg)
OVERLAY GRILLE PANEL DIMENSIONS
WIDTH HEIGHT
10" (254) Grille Panel 407/16" (1027) 91/4" (235)
Overla Overla
y Door Panels y Grille Panel
10" (254) Grille Spacer 391/2" (1003) 85/16" (211) 10" (254) Grille Backer 401/8" (1019) 815/16" (227)
(279) Grille Panel40
11"
7
/16" (1027) 101/4" (260) 11" (279) Grille Spacer 391/2" (1003) 95/16" (237) 11" (279) Grille Backer 401/8" (1019) 915/16" (252)
12" (305) Grille Panel 407/16" (1027) 111/4" (286) 12" (305) Grille Spacer 391/2" (1003) 105/16" (262) 12" (305) Grille Backer 401/8" (1019) 1015/16" (278)
13" (330) Grille Panel 407/16" (1027) 121/4" (311) 13" (330) Grille Spacer 391/2" (1003) 115/16" (287) 13" (330) Grille Backer 401/8" (1019) 1115/16" (303)
14" (356) Grille Panel 407/16" (1027) 131/4" (337)
(356) Grille Spacer
14"
1
9
3
/2" (
003)
1
5
2
1
/16" (313)
14" (356) Grille Backer 401/8" (1019) 1215/16" (329)
15" (381) Grille Panel 407/16" (1027) 141/4" (362) 15" (381) Grille Spacer 391/2" (1003) 135/16" (338)
(381) Grille Backer 40
15"
1
/8" (
1019)
15
3
1
/16" (354)
Dimensions in parentheses are in millimeters unless otherwise specified.
9
Page 10
Planning Information
131/4" (
337)
4" (102)
1
/4" (6)
1
/4" (6)
3"
(76)
3" (76)
237/8" (
606)
B
EHIND FRAME
1
Built-In Model 642
SIDE PANELS
SIDE PANELS
Side panels can be used with the framed, overlay and stainless steel design applications. When planning for side panels with the installation of the Built-In model, you need to be aware of space configuration to achieve a pleasing fit. Depending on the exact panel you are using with your unit, the height of the panel will vary.
Cut-outs around the toe kick and grille area are required if
1
a
/4" (6) thick panel will be inserted into the main frame channel. The panel will need to be 24" (610) deep. Refer to the illustration on this page for placement of toe kick and grille area cut-outs. If a panel will abut the main frame and should be 23
3
/8" (10) thick panel is used, the
7
/8" (606) deep. The toe kick area may or may not be cut out depending on the look you want to achieve.
IMPORTANT NOTE: The use of side panels may change the width of your rough opening.
Cut-outs for grille and toe kick area
HARDWARE CONSIDERATIONS
Overlay models come without handle hardware. The beauty of this design is that you can match the surround­ing cabinet hardware. You or the cabinet manufacturer must provide handle hardware to match the overall deco­rating scheme.
The handle hardware must be installed before installing the panel assembly. Use larger D-style handles. If screws with thick heads are used, the screws will need to be countersunk into the door before the panel is put into
. Refer to the full-scale illustr
place
ations on pages 1
1–12
for handle hardware considerations.
IMPORTANT NOTE: Sub-Zero does not recommend using single pull knobs on any of its Built-In models.
Optional stainless steel handles are available in a variety of diameter
s and lengths in the classic, platinum and carbon stainless steel finishes and polished chrome. Contact your Sub-Zero dealer for specifics. To obtain local dealer information, visit the Locator section of our website,
o.com.
subzer
Dimensions in parentheses are in millimeters unless otherwise specified.
10
Page 11
Planning Information
11/4"(
32) PANEL
1"(25) PANEL
1
/4"(6) P
ANEL
1
/2"(13) PANEL
3
/4"(19) PANEL
O
PTIONAL
EXTENDED
FULL-LENGTH
HANDLE
S
TANDARD
FULL-LENGTH
HANDLE
DOOR
1
/4"(
6)
FRAMED PANEL
1"
(25)
2"
(
51)
3"
(
76)
Built-In Model 642
HANDLE PROFILE – FRAMED APPLICATION
FULL-SCALE TEMPLATES
The following full-scale illustrations enable you to under
stand some of the unique situations you may face as you design the Built-In units into homes. These templates can be easily photocopied or used in y
Dimensions in parentheses are in millimeters unless otherwise specified.
our tr
acings.
HANDLE PROFILE
The full-scale illustration above shows handle placement for the fr
amed a
pplication standard full-length handle and the optional extended full-length handle shown in the dashed line.
11
Page 12
Planning Information
11/4" (32) PANEL
1" (25) PANEL
1
/4" (
6) PANEL
1
/2" (
13) PANEL
3
/4" (19) PANEL
5
/8" (16) PANEL
DOOR
1
/4" (
6)
APPROXIMATE THICKNESS OF WRAPPED STAINLESS STEEL DOOR
NOTE: FOR OVERLAY APPLICATIONS, OPTIONAL STAINLESS STEEL HANDLE
MUST BE MOUNTED ON PANEL MINIMUM 5/8" (16) THICK.
1"
2"
(
51)
3"
(
76)
S
TANDARD STAINLESS STEEL HANDLE
Built-In Model 642
HANDLE PROFILE – STAINLESS STEEL / OVERLAY APPLICATIONS
PANEL AND HANDLE PROFILE
The full-scale illustr placement for the standard stainless steel
ation a
bove shows handle
handle on the wrapped stainless steel door and on overla dashed line
y panel applications shown in the
.
IMPORTANT NOTE: For overlay applications, the optional stainless steel handle must be mounted on a panel at least
5
/8" (16) thick.
For overlay applications, mount door handles close to the opening edge of the door for ease of opening
.
Dimensions in parentheses are in millimeters unless otherwise specified.
12
Page 13
1
1
/
4
"
(32)
PA N
EL
1"
(25)
PA N
EL
*
1
/
4
"
(6)
PA N
EL
1
/
2
"
(13)
PA N
EL
3
/
4
"
(19)
PA N
EL
130˚ DOOR OPENING
WITH 2" (51) FILLER STRIP
(
TOP VIEW)
OPTIONAL
FRAMED EXTENDED
FULL-LENGTH HANDLE
STANDARD
FRAMED
FULL-LENGTH
HANDLE
D
OOR CLOSED
DOOR OPEN @ 130˚
HINGE
2" (51)
F
ILLER STRIP
MAIN FRAME
A
LLOW FOR FILLER LAP
BEHIND FLANGE
APPROX
PROFILE OF
STAINLESS STEEL DOOR AND HANDLE
OVERLAY PANEL
3/4" (19) THICK
(NOMINAL)
S
UB-ZERO UNITSUB-ZERO UNIT
Planning Information
Built-In Model 642
PANEL AND HANDLE PROFILE – 130˚ DOOR OPENING
The full-scale illustration above shows the panel and handle profile of a 130˚ door opening with 2" (51) filler strip for framed applications.
Interference of door panels with handles at maximum door s optional 90˚ door stop available through your Sub-Zero dealer.
Appr
* stainless steel door
Dimensions in parentheses are in millimeters unless otherwise specified.
oximate thic
wing ma
y require the use of an
kness of wr
.
pped
a
To obtain local dealer information, visit the Locator section of our website, subzero.com.
The full-scale illustration on the following page lets you see what considerations you need to
e for any overla
mak how they may interact with adjacent cabinets
y panel applications, and
and/ or countertops.
13
Page 14
Planning Information
1
1
/4
"
(32)
PA N
EL
1"
(25)
PA N
EL
*
1
/4
"
(6)
PA N
EL
1
/2
"
(13)
PA N
EL
3
/4
"
(19)
PA N
EL
1
1
/4
"
(32)
1
1
/2
"
(38)
1
3
/4
"
(44)
0"
(0)
1"
(25)
2"
(51)
2
1
/4
"
(57)
2
1
/
2
"
(63)
2
3
/
4
"
(70)
3"
(76)
3
1
/4
"
(83)
3
1
/
2
"
(89)
1
/4
"
(6)
1
/2
"
(25)
3
/4
"
(19)
HINGE
OVERLAY PANEL
3/4" (19) THICK (NOMINAL)
DOOR CLOSED
DOOR OPEN @ 90˚
90˚ DOOR OPENING
(TOP VIEW)
M
AIN FRAME
NOMINAL OVERALL
WIDTH OF SUB-ZERO
S
UB-ZERO UNIT
237/8" (606) TO REAR
O
F SUB-ZERO
Built-In Model 642
OVERLAY PANEL APPLICATION – 90˚ DOOR OPENING
kness of wr
.
oximate thic
Appr
* stainless steel door
Dimensions in parentheses are in
pped
a
millimeters unless otherwise specified.
14
Loading...