SUBARU H0018FG300 Instruction

Handsfree

Before using the Handsfree

What can be made with the handsfree

It is possible to connect the Bluetooth Phone of which the operation has been confirmed through the Bluetooth format (wir from the in-vehicle equipment or take an incoming phone call. Since the Bluetooth format is wireless, a connection between the in-vehicle equipment and the Bluetooth Phone can be made without placing them in th The Bluetooth Phone can be used with it left in the breast pocket or bag.

The Bluetooth Phone that is compli must meet the following requirements.

• Bluetooth Specification Ver. 1.1 or above (Ver. 1.2 or above is reco

mended.)

• Corresponding Profiles are as shown below.

• HFP (Hands Free Profile) Ver. 1.0 (Ver. 2.0 or above is recommended

• OPP (Object Push Profile) Ver. 1.1

"Bluetooth" is a trademark of Bluetooth SIG, Inc.

to the in-vehicle equipment

eless) to make a phone call

e close vicinity of each other.

ant with the in-v

ehicle equipment

What cannot be done with the handsfree.

In the following cases, the functions of the handsfree cannot be used

• While not in the phone call area.

• While in the phone call being restricted due to the lines congest

• When the phone book data is bein

Phone.

• When the Bluetooth Phone is being used, due to data communica-

tion.

• When the Bluetooth Phone is out of order.

• When the Bluetooth Phone is not connected to the in-vehicle equi

ment.

• When the battery of the Bluetooth Phone has run down.

• When the power switch of the Bluetooth Phone is turn

• When the Bluetooth Phone is not set to the handsfree mode.

• When a changeover is made on th

book transmission to the handsfree.

• When the Bluetooth Phone cannot be used for other reasons.

g transmitted from the Bluetooth

e in-vehicle side from the phone

ed.

ed off.

170 Handsfree

Precautions to be taken when using the Bluetooth equipment

Pleas take note of the following when using the Bluetooth equipment.

WAR NIN G

• For safety's sake, the driver sh

Bluetooth Phone while driving.

• Do not make a phone call while driving. When you have an

incoming call, bring your car to a stop in a safe place in a calm manner before taking the incoming phone call. When you hav to absolutely take a phone call, tell the caller "I'll call you back" b handsfree. And then call him back after stopping the car in a saf place.

• Do not leave the Bluetooth Phone in the vehicle.

(The temperature in a sun-heated car may go up extremely high.)

• When using the Bluetooth Phone, be careful not to get it close

the in-vehicle equipment. Getting it too close to the in-veh equipment may result in deteriorat connecting condition.

ould avoid the operation of the

CAUTION

icle

ion in tone quality or a poor

y e

• In the frequency band used by th

trial, scientific and medical equipment such as microwave oven, radio stations (a license required) to be used by the production line in the factory to identify movable bodies, specific small power radio stations (a license stations (a license required) are being operated. (These three type radio stations mentioned above are hereinafter referred to as "other radio stations.") Before using this equipment, be sur check to see if "other radio stations" are being operated in the vicinity. Should there be a detrimental radio interference from this equipment to "other radio stations," move the equipment to another location as soon as possible to avoid radio interference. The frequency band used by this equipment is in the 2.4 GHz zone. The FH-SS modulation is employed as a modulation method. The expected inflicting inte 10m. This equipment uses a full by a movable body identification device.

Before using the Handsfree

is equipment, along with indus-

not required) an

rference distance is less than

band and can avoid a band used

d amateur radio

e to

Handsfree 171

Before using the Handsfree

Name of each part

The name of each part used by the functions of the handsfree is as shown below.

■ In-vehicle equipment

Operating the touch switch the functions of the handsfree.

es displayed on the screen allows you to use

■ Steering switches

Pressing the switch short allows yo

Pressing the switch long allows you to hang up the phone.

u to answer an incoming phone call.

■ Microphone

Used while in the phone call. (dealer option)

For details, check with the dealer.

172 Handsfree

Phone voice

After making a phone call or having a phone call, you can talk over the phone through mike and speaker.

• An incoming call notice and a voice output while in the phone call

are output from the speaker on the seat.

• When a voice or an incoming call si

the sound from the audio and the navigation system is mut

driver's seat side and passenger’s

gnal is issued by the handsfree,

ed.

Before using the Handsfree

Handsfree 173

Before using the Handsfree

Various types of displays

Selecting (Phone) with the button pressed displays the PHONE MENU screen operate the functions of the handsfree. The explanation here is given of the various kinds of displays shown on the PHONE MENU screen.

Roaming display

Bluetooth connection status display

, in which you can set and

Reception level display

Battery indicator

• When "Out of the range" is being

service area, or in the location to

displayed, you are now out of the

which no radio waves get through. On occasions like this, you cannot use the Bluetooth Phone. Move a location where a clear reception can be obtained.

• The reception level does not always conform to the displa

Bluetooth Phone. The reception level may not be displa

yed for some

model types.

Battery indicator

y of the

Reception level display

This shows a rough standard of the reception level of radio wa ever, this is not displa data.

Display:

Level:

Out of the range

174 Handsfree

yed while in the transmi

Intense

ssion of the phone book

ves. How-

Faint

This shows a rough battery capacity this is not displayed while in the tr

Display:

Remaining amount:

None Little

of the Bluetooth Phone. However,

ansmission of the phone book data.

Full

• The display of the battery capacity may not sometimes confor

that of the Bluetooth Phone. And

also, the battery capacity may not

be displayed for some model types.

• This system is not provided with a

charging function for a cell phone.

m to

Before using the Handsfree

Bluetooth connection status display

This displays the Bluetooth connection status of the Bluetooth P

The Bluetooth Phone is correctly connected to the in-ve ment.

The Bluetooth Phone is connected to the in-vehicl radio waves are weak.

The Bluetooth Phone is not connected to the in-v When using the handsfree, register the Bluetooth P vehicle equipment, and then connect them each oth ing the Bluetooth Phone" on Page 167.)

hicle equip-

e equipment, but

ehicle equipment.

hone and the in-

er. (See "Register-

hone.

Roaming display

Roaming is a service that provides a using the facilities of a company with which the telephone compan ties up when you are out of the stipulated service area.

When the roaming function is being used, "Rm" is displayed.

continuous use of the system by

Handsfree 175

Before using the Handsfree

When parting with your car

When using the handsfree, a lo registered. When parting with your car, delete your personal information and data referring to the following. And data once deleted cannot be state. Be careful not delete date mistakenly.

t of personal information is

restored to their original

Deleting all the outgoing and incoming call history. (See Page

Deleting all the phone book data. (See Page

Deleting the registered Bluetooth Phone from the in-vehicle ment. (See Page

Changing the Device Name of the in-vehicle equipment displayed in the Bluetooth Phone. (See Page 209

Changing the Pass-Key to be used Phone. (See Page

207.)

when certificating the Bluetooth

211.)

205.)

193.)

equip-

176 Handsfree

Making preparations of the handsfree

Registering the Bluetooth Phone

To use the Bluetooth Phone in equipment, it is necessary to register the Bluetooth Phone with the in-vehicle equipment in advance.

NOTE

It is possible to register up to five ment. However, Bluetooth Phones that can be used with th ment are restricted only to those selected by the phone sele

Press the button.

Select (Phone).

interlock with the in-vehicle

Bluetooth Phones with the in-vehicle equip-

e in-vehicle equip-

ction.

Select (Bluetooth Settings).

Select (Register).

PASS-KEY displayed on the

Handsfree 177

Making preparations of the handsfree

The device name of the Blueto

oth Phone is displayed on the

DEVICE LIST.

The Bluetooth Phone most recently registered is selected as a Bluetooth Phone to be used wi

NOTE

• For detailed method for the

refer to the instruction manual of the Bluetooth Phone.

• With

the in-vehicle equipment automatically accept the connec Selecting

• When registering two or more Bluetooth Phones

Phone for connection.

transmission of the PASS-KEY from the Bluetooth Phone,

(Autoconnect) set to "ON" on the DEVICE LIST scr

(Autoconnect) makes a

th the in-vehicle equipment.

tion of the Bluetooth Phone.

changeover between ON and OFF.

, it is necessary to select a Bluetooth

een in advance,

178 Handsfree

Connecting the Bluetooth Phone

To use the Bluetooth Phone in equipment, the Bluetooth Phone registered with the in-vehicle equipment is required to be connected to the in-vehicle equipment. When is displayed on the PHONE MENU screen, or when changing a Bluetooth Phone to be connected, conduct this operation.

interlock with the in-vehicle

Select (Bluetooth Settings).

Making preparations of the handsfree

With "Autoconnect" set to "ON" in advance, a connection is made matically to the Bluetooth Phone most recently connected mended that "Autoconnect" is set to "ON" in advance.

Press the button.

Select (Phone).

. It is recom-

auto-

Select the Bluetooth Phone you want to connect.

Handsfree 179

Making preparations of the handsfree

Select (Connect).

NOTE

• With

advance, the in-vehicle equipment automatically accept th the Bluetooth Phone. Selecting changeover between ON and OFF. When a connection has been made to

•

tion message is displayed.

Select (Yes).

(Autoconnect) set to "ON" on the DEVICE LIST scre

(Autoconnect) makes a

another Bluetooth Phone, a confirma-

en in

e connection of

The Bluetooth Phone selected is

180 Handsfree

connected by the Bluetooth.

Speaking over the handsfree

Making a phone call

Entering a phone number

to make a phone call

Select (Bluetooth Phone).

It is possible to select the in-vehicle equipment to enter a pho ber and make a phone call.

Press the button.

Select (Phone).

ne num-

Select numeric keys to enter a phone number and then select .

Handsfree 181

Speaking over the handsfree

NOTE

• Selecting briefly allows you to en

more than two seconds allows you to enter "+."

• Selecting allows you to delete a digit entered.

Select (Yes).

You have a phone call. Speak over the phone.

ter "*." And then selecting for

Making a phone call from the outgoing or

incoming call history

It is possible to make a phone call or incoming call history.

Press the button.

Select (Phone).

Select (Redial List) or (Received Calls).

to a phone number in the outgoing

When the phone call is over, ha

182 Handsfree

ng up the phone. (See Page

191.)

+ 30 hidden pages