Structural Concepts HVCB48 Installation Manual

READ AND SAVE THESE INSTRUCTIONS

OPERATING

MANUAL

SELF-SERVICE INLINE CRUSTY BREAD MERCHANDISER

PN 54165

Straight Base With

Model HVCB48, HVCB56, HVCB74*
*See Technical Information
Sheets for specific dimensions.

Two Shelves

Angled Pedestal Base With Three Shelves, Product

Angled Pedestal Base With

Two Shelves, Optional

Acrylic Bins and Baskets

Stop on Deck, and Optional Acrylic Bins

I:\Oper Manuals\Encore\HVCB[L]_54165.pub

888 E. Porter Road · Muskegon, MI 49441 Phone: [phone] Fax: [phone] www.structuralconcepts.com

1

Rev B Date: 8.15.2007

TABLE OF CONTENTS

OVERVIEW AND WARNINGS …….………..………..………………..…..…….………….....…..

REMOVAL FROM SKID ……………………………………………………………………………..
POSITIONING AND LEVELING UNIT ……………………………………………………………..
SHELF REMOVAL ..……………………….…………………………………………………………
LIGHTS (ACCESS AND REMOVAL) .…..……………...…………………………………………..
CLEANING SCHEDULE - TO BE PERFORMED BY STORE PERSONNEL …..……………..
TROUBLESHOOTING …………………………………………………………………………… ….
SERIAL LABEL & LOCATION / TECHNICAL INFORMATION / ADD’L INFORMATION ..…..

TECHNICAL SERVICE CONTACT INFORMATION & WARRANTY INFORMATION ...….....

3
4
5
6
7
8

9
10
11

2

OVERVIEW AND WARNINGS

OVERVIEW

 This Structural Concepts® Case is designed to merchandise packaged / unpackaged bakery

products.

 This case should be installed and operated according to this Operating Manual to insure proper

performance.

 This unit is designed for the display of products in ambient store conditions where temperatures

and humidity are maintained at a maximum of 75°F / 24°C and 55% relative humidity.

This merchandiser is designed for the display of non-hazardous, packaged / unpackaged bakery
products (per NSF Std. 2 – 1999).

WARNING

ELECTRICAL
HAZARD

CAUTION

WARNING

Risk of Electric Shock.

Disconnect Power Before Servicing Unit

CAUTION

Lamps have been treated to resist breakage and must be replaced with

similarly treated lamps.

3

REMOVAL FROM SKID

1. Remove Unit From Skid

 Remove case from skid and place into

proper position.

 To prevent damage, support case while

sliding skid out from under case.

 Note:Illustration at right reflects general

outline of sample case and does not re­flect any particular model or options).

Carefully Slide Skid
Out From Under Unit

Support
case while
removing
from skid.

4

POSITIONING AND LEVELING UNIT

POSITIONING AND ADJUSTING LEVELERS

1. Positioning Case

 Before adjusting levelers, make certain that the case is in proper position.

2. Adjust Levelers

 After case is in proper position, adjust case so it is level and plumb (see illustration at right).
 You may need to remove front and/or rear Toe-Kick to access levelers.
 Use adjustable wrench to adjust leveler.
 See illustration and photos below.

Leveler

Adjustable

Wrench

5

5

SHELF REMOVAL

Removing the Shelves

These cases are designed with adjustable shelves and optional wicker baskets. To adjust or to remove,
follow these instructions.

1. Remove the wicker baskets (optional).

2. Lift shelf upward.

3. Slide shelf forward (to remove).

4. Rotate shelf upward (or downward) to adjust angle of shelf.

Note: Illustration below shown with end panel removed for illustrative purposes only.

1. Remove
Wicker

Baskets

Shelves

2. Lift Shelf
Upward

3. Slide Shelf
Forward or

4. Rotate Shelf
Upward or
Downward

6

LIGHTS (ACCESS AND REMOVAL)

Light Fixtures

Removal of lamps:

 Grasp lamp firmly and carefully pull down-

ward and out from socket.

 See photo at lower right.

Installation of lamp:

 Align pins with slot.
 Insert pins into socket and push upward into

place.

 See photo at lowest right for view of fully in-

stalled lamp.

Lights

7

CLEANING SCHEDULE - TO BE PERFORMED BY STORE PERSONNEL

FREQUENCY INSTRUCTIONS

Weekly

Weekly

Weekly

End Panels, Front Panel, Toe-Kick, etc.: Wipe off all surfaces with warm

water and mild soap solution and non-abrasive cloth.

Shelving: Clean shelves with a household or commercial general cleaner and a
soft cloth or paper towel.

Wicker Baskets (Optional): Remove Baskets and vacuum away dust and resi­due. Wipe down with moist cloth dipped in warm water and mild soap solution.

Weekly

Weekly

Acrylic Storage Bins (Optional): Clean with a warm water and mild soap

solution and soft cloth. Never use ammonia-based cleaners on acrylic.

Under Case Cleaning: Vacuum under case to remove all dust and dirt that may
collect.

8

TROUBLESHOOTING

CONDITION TROUBLESHOOTING

Case Lights Are Not Working,
continued.

Check for burned out bulbs. Turn lights off & replace.

Clean dirt and dust from the bulbs to prevent flickering.

9

SERIAL LABEL LOCATION & INFORMATION LISTED / TECH INFO & SERVICE

SERIAL LABEL LOCATION & INFORMATION LISTED / TECH INFO & SERVICE

Serial Label Location & Information Listed / Technical Information & Service

Serial Label Location & Information Listed / Technical Information & Service

 Serial labels are located near the electrical access on your case.

 Serial labels are located near the electrical access on your case.
 Serial labels contain electrical, temperature & refrigeration information, as well as regulatory

 Serial labels contain electrical, temperature & refrigeration information, as well as regulatory

standards to which the case conforms.

standards to which the case conforms.

 For additional technical information and service, see the TECHNICAL SERVICE page in this

 For additional technical information and service, see the TECHNICAL SERVICE page in this

manual for instructions on contacting Structural Concepts’ Technical Service Department.

manual for instructions on contacting Structural Concepts’ Technical Service Department.

 See images below for samples of both refrigerated and non-refrigerated serial labels.

 See images below for samples of both refrigerated and non-refrigerated serial labels.

S

S

S

A

A

M

M

P

P

L

L

A

E

E

M

P

O

O

L

E

N

N

L

L

Y

Y

O

N

L

Y

Y

Y

L

S

A

M

P

L

E

S

S

O

A

A

N

M

M

L

P

P

Y

L

L

SA

----- Sample Serial Label For Refrigerated Case -----

----- Sample Serial Label For Refrigerated Case -----

M

M

SA

SA

E

E

PL

M

PL

PL

O

O

E

E

N

N

E

O

O

L

O

N

N

N

L

L

Y

Y

L

Y

----- Sample Serial Label For Non-Refrigerated Case -----

----- Sample Serial Label For Non-Refrigerated Case -----

888 E. Porter Road · Muskegon, MI 49441 Phone: [phone] Fax: [phone] www.structuralconcepts.com

888 E. Porter Road · Muskegon, MI 49441 Phone: [phone] Fax: [phone] www.structuralconcepts.com

10

10

TECHNICAL SERVICE CONTACT INFORMATION & WARRANTY INFORMATION

STRUCTURAL CONCEPTS CORPORATION TECHNICAL SERVICE

PHONE NUMBER: 1.800.433.9489 or For Your Master Service Agent See

WWW.STRUCTURALCONCEPTS.COM/Contact/Master_Service_Agents.asp

WARRANTY INFORMATION

(Note: Standard Limited Warranty can be found at www.Struct ural conc ept s.com)

All sales by Structural Concepts Corporation (SCC) are subject to the following limited warranty. “Goods” refers to the product or products being sold by SCC.

Warranty Scope: Warranty is for equipment sold in the United States, Canada, Mexico and Puerto Rico. Equipment sold elsewhere may carry modified warranty.
Warranty; Remedies; Limitations. SCC warrants that if any Goods are found by an authorized representative of SCC not to be of good material or workmanship within one

year of the date of shipments SCC will, at its option after inspection by an authorized representative, replace any defective Good or pay the reasonable cost of replacement
for any such defective Goods, provided that written notice of the defect is given to SCC within 30 days of the appearance of such defect. If notice is not given within such
period, any claim for breach of warranty shall be conclusively deemed to have been waived and SCC shall not be liable under this warranty. If SCC is unable to repair or
replace the defective Goods, SCC shall issue a credit to the Purchaser for all or part of the purchase price, as SCC shall determine. The replacement or payment in the
manner described above shall be the sole and exclusive remedy of Purchaser for a breach of this warranty. If any Goods are defective or fail to conform to this warranty,
SCC will furnish instructions for their disposition. No Goods shall be returned to SCC without its prior consent.

SCC’s liability for any defect in the Goods shall not exceed the purchase price of the Goods. SCC SHALL HAVE NO LIABILITY TO PURCHASE FOR CONSEQUENTIAL
DAMAGES OF ANY KIND WHATSOEVER, INCLUDING, BUT NOT LIMITED TO, PERSONAL INJURY, PROPERTY DAMAGE, LOST PROFITS, OR OTHER ECONOMIC
INJURY DUE TO ANY DEFECT IN THE GOODS OR ANY BREACH OF SCC, SCC SHALL NOT BE LIABLE TO THE PURCHASER IN TORT FOR ANY NEGLIGENT DE­SIGN OR MANUFACTURE OF THE GOODS, OR FOR THE OMISSION OF ANY WARNING THEREFROM.

SCC shall have no obligation or liability under this warranty for claims arising from any other party’s (including Purchaser’s) negligence or misuse of the Goods or
environmental conditions. This warranty does not apply to any claim or damage arising for or cause by improper storage, handling, installation, maintenance, or from fire,
flood, accidents, structural defects, building settlement or movement, acts of God, or other causes beyond SCC’s control.

Except as expressly stated herein, SCC makes no warranty, express, implied, statutory or otherwise as to any parts or goods not manufactured by SCC. SCC shall warrant
such parts or Goods only (I) against such defects, (II) for such periods of time, and (III) with such remedies, as are expressly warranted by the manufacturer of such parts of
Goods. Notwithstanding the foregoing, any warranty with respect to such parts of Goods and any remedies available as a result of a breach thereof shall be subject to all of
the procedures, limitations, and exclusions set forth herein.

THE WARRANTIES HEREIN ARE IN LIEU OF ALL WARRANTIES, EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE. IN PARTICULAR, SCC MAKES NO
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

No representative, agent or dealer of SCC has authority to modify, expand, or extend this Warranty, to waive any of the limitations or exclusions, or to make any different or
additional warranties with respect to Goods.

Period of Limitations. No claim, suit or other proceeding may be brought by Purchaser for any breach of the foregoing warranty or this Agreement by SCC or in any way
arising out of this Agreement or relating to the Goods after one year from the date of the breach. In the interpretation of this limitation on action for a breach by SCC, it is
expressly agreed that there are no warranties of future performance of the goods that would extend that period of limitation herein contained for bringing an action.

Indemnifications. Purchaser agrees to indemnify, hold harmless, and defend SCC if so requested, from any and all liabilities, as defined herein, suffered, or incurred by SCC
as a result of, or in connection with, any act, omission, or use of the Goods by Purchaser, its employees or customers, or any breach of this Agreement by Purchaser.
Liabilities shall include all costs, claims, damages, judgments, and expenses (including reasonable attorney fees and costs).

Remedies of SCC. SCC’s rights and remedies shall be cumulative and may be exercised from time to time. In a proceeding or action relating to the breach of this Agreement
by Purchaser, Purchaser shall reimburse SCC for reasonable costs and attorney’s fees incurred by SCC. No waiver by SCC of any breach of Purchaser shall be effective
unless in writing nor operate as a waiver of any other breach of the same term thereafter. SCC shall not lose any right because it has not exercised it in the past.

Applicable Law. This Agreement is made in Michigan and shall be governed by and interpreted according to Michigan law. Any lawsuit arising out of this Agreement or the
Goods may be handled by a federal or state court whose district includes Muskegon County, Michigan, and Purchaser consents that such court shall have personal
jurisdiction over Purchaser.

Miscellaneous. If any provision of this Agreement is found to be invalid or unenforceable under any law, the provision shall be ineffective to that extent and for the duration of
the illegality, but the remaining provisions shall be unaffected. Purchaser shall not assign any of its rights nor delegate any of this obligations under this Agreement without
prior written of SCC. This Agreement shall be binding upon and inure to the benefit of SCC and Purchaser and each of their legal representatives, successors and assigns.

SCC warrants its products to be free of defects in materials and workmanship under normal use and service for a period of one (1) year from the date of delivery.
This warranty is extended only to the original purchaser for use of the Goods. It does not cover normal wear parts such as plastic tongs, tong holders, tong cables, bag

holders, or acrylic dividers.
General Conditions. All service labor and/or parts charges are subject to approval by SCC. Contact the Customer Service Department in writing or call 231-798-8888.
All claims must contain the following information: (1) model & serial code number of equipment; (2) the date and place of installation; (3) the name and address of the agency

which performed the installation; (4) the date of the equipment failure; and (5) a complete description of the equipment failure and all circumstances relating to that failure.
Once the claim has been determined to be a true warranty claim by SCC’s Customer Service Department, the following procedure will be taken: (1) replacement parts will be

sent at no charge from SCC on a freight prepaid basis; (2) reimbursement for service labor will be paid if the following conditions have been met— (a) prior approval of ser­vice agency was awarded from the Customer Service Department; and (b) an itemized statement of all labor charges incurred is received by the Customer Service Depart­ment. The cost of the service labor reimbursement will be based on straight time rates and reasonable time for the repair of the defect.

If problems occur with any compressor, notify SCC’s Customer Service Department immediately. Any attempt to repair or alter the unit without prior consent from the
Customer Service Department will render any warranty claim null and void. This warranty and protection plan does not apply to any condensing unit or any part thereof which
has been subject to accident, negligence, misuse, or abuse, or which has not been operated in accordance with the manufacturer’s recommendations or if the serial number
of the unit has been altered, defaced, or removed.

Limit of Liability. The limit of liability of SCC toward the exchange cost of the original condensing unit, F.O.B. SCC, Norton Shores, MI, of each motor-compressor assembly
replaced during the warranty shall not exceed manufacturer's current established wholesaler’s exchange price and in no case shall the labor of removing or replacing the
motor-compressor or parts thereof be the responsibility of SCC.

11