Strong VIDEO SENDER Installation Manual

VIDEO SENDER

DOMESTIC VIDEO/AUDIO MICROWAVE LINK

The VIDEO LINK transmit / receive system provides a wireless connection between the main source
of Audio and Video equipment to another Audio and Video equipment. High quality video and stereo audio
can now be distributed without the need for complicated wiring. One transmitter can feed multiple of
receivers. The VIDEO LINK can also be used as wireless link between a PC, Camera, and CATV.

GETTING STARTED

SIGHTING

The proposed site for the transmitter should be near the main TV and VCR, free from vibration, in an open
space and protected from moisture and dampness.

The receiver should be located close to the second TV where you wish to view.

INSTALLATION

CONNECTING THE POWER

• Connect the transmitter and receiver up to the system as shown in the diagram below.

• Connect the AC top plug to a 230V 50Hz AC socket outlet.

• Ensure that the receiver is well ventilated.

• Do not place other equipment directly on top of the transmitter and receiver.

CONNECTING THE TRANSMITTER

Initially we recommend the transmitter, receiver and second TV be operated in the same room so
that the operation can be easily understood. When the system is working correctly transfer the
receiver and second TV to your required location. The connection of the transmitter is as shown
below:

Picture 1: