一
Digital Satellite Receiver
USER’S MANUAL
1
Table of contents
Safety…………………………………………………………………………….……4
General Introduction………………………………………………………….…..…6
Front Panel / Rear Panel…………………………………………………………....8
Remote Control Unit………………………………………………………….……. 10
S.T.B Connection……………………………………………………………….......13
User Settings…………………………………………………………………...14
1. User Settings………………………………………………………………...14
1.1 OSD setting……………………………………………………….…...14
1.2 A/V output setting……………………………………………………………14
1.3 Local Time Setting………………………………………………………….14
1.4 Timer Setting………………………………………………………....15
1.5 Parental Control…………………………………………………………...15
2. Installation…………………………………………………………….………16
2.1 Antenna settintg……………………………………………………….………17
2.2 Satellite listt………………………………………………….………...17
2.3 Transponder list…………………………………………….……..….18
2.4 Setup Motor…………………………………………….……..….19
2.5 USALS Setup…………………………………………….……..….19
3. Channel Manager……………………………………….………..20
3.1 TV Channel dit……………………………………….………..20
3.2 Radio Channel Edit……………………………………….………..21
2
Table of contents
4. System……………………………………………………………………………..24
4.1 System Infornation……………………………………………....24
4.2 Factory Default………………………………………………………..…...….…24
5. USB ………………………………………………………………………………25
5.1 PVR Preview…………….………………………………………………………25
5.2 PVR Partition Select………………………………………………………25
5.3 USB Meida……………………………………………………………………26
5.4 USB Game………………………………………………………………………27
5.5 Software Update………………………………………………………………28
5.6 Database backup……….……………………………………………………28
PVR Instruction………………………………………………………………29
TIMESHIFT………………………………………………………………30
6. Games……………………………………………………………………………..31
6.1 Teris………………………………………………………………………………31
6.2 Snake……………………………………………………………………………31
Trouble Shooting………………………………………………………………….…32
Glossary……………………………………………………………….……………...33
Specification………………………………………………………………………….35
3
Safety Instructions
This STB has been manufactured to satisfy the international safety standards.
Please read the following safety precautions carefully.
MAIN SUPPLY
:AC 100/240V, 50/60Hz, 30W.
OVERLOADING
:Do not overload a wall outlet, extension cord or adapter as this may result
in fire or electric shock.
Ensure that the power source (socket) is easily accessible.
LIQUIDS
:This STB shall not be exposed to dripping or splashing and that no objects
filled with liquids, such as vases, shall be placed on the STB.
CLEANING
:Disconnect the STB from the main supply before cleaning. Do not use any
kind of solvents to clean the STB, only use a soft-dry cloth.
VENTILATION
:The slots on top of the STB must be left uncovered to allow proper airflow
to the unit.
Ensure a minimum distance of 5cm around the apparatus for sufficient
ventilation.
Ensure that the ventilation is not impeded by covering the ventilation
openings with items such as newspapers, table-cloths, curtains, etc.
Do not stand the STB on soft furnishings or carpets.
Do not expose the STB to direct sunlight or do not place it near a heater.
Do not stack electronic equipments on top of the STB.
Do not place naked flame sources, such as lighted candles on the
apparatus.
ATTA CHM EN TS
:Do not use any unrecommended attachments as these may cause hazard
or damage to the STB.
4
Safety Instructions
CONNECTION TO THE SATELLITE DISH LNB
:Disconnect the STB from the main supply before connecting or
disconnecting the cable from the satellite dish.
FAILURE TO DO SO CAN DAMAGE THE LNB.
CONNECTION TO THE TV
:Disconnect the STB from the main supply before connecting or
disconnecting the cable from TV.
FAILURE TO DO SO CAN DAMAGE THE TV.
EARTHING
:The LNB cable MUST BE EARTHED to the system earth for the satellite
dish.
LOCATION
:Place the STB indoor in order not to expose to lightening , rain or Sunlight.
Use the apparatus only in moderate climates (not in tropical climates).
Battery handling
:Batteries may contain toxic agents that are hazardous to the environment.
Therefore, dispose of the batteries immediately according to the prevailing
statutory regulations. Never throw the batteries in normal household waste.
5
General Introduction
INTRODUCTION
This manual will help you learn basic functions such as installation, selecting
channels and many other functions of the STB. All functions can be operated by
the remote control. You can easily install it by selecting ”Installation” function
and upgrade its software through communication cable.
The remote control is designed for easy access to all the functions at once and
for comfortable grab for your hand. It is programmed to control all functions and
to easily watch TV and Radio programs via the STB.
WARNING
Any problems can be caused by the use of unofficial software. The use of
software versions other than dealers or distributors official software will void the
manufacturer’s warranty. It is advised that only the formal software released
from dealers or distributors should be used.
6
General Introduction
UNPACKING
Unpack the unit and check to make sure that all of the following items are
included in the packaging.
1 x Remote Control Unit (RCU)
1 x User Manual
2 x AAA batteries
1 x Digital Satellite Receiver
1 x A/V Cable
We hope you enjoy using your digital satellite receiver!
7
Front Panel/ Rear Panel
Front Panel
1 2 3 4
1
USB port, for connecting a USB storage device.
2
3
4
To switch the receiver between stand-by mode and po
wer-on mode.
To select the next channel, or next option in a menu.
To select the previous channel, or previous option in a
menu.
8
Front Panel/ Rear Panel
Rear Panel
No. Symbol Function
1
LNB INPUT Use to connect a satellite dish.
2
Y/Pb/Pr RCA
Component
3
Video RCA Composite video connection
4
ANT IN Connect to Terrestrial Antenna through Modulator.
5
A/V RCA
6
LOOP OUT
7
RS-232 Use it when connecting to your PC.
8
A/V RCA
9
S/PDIF
10
POWER Power ON/OFF switch.
Component connection (Y/Pb/Pr)
To connect the Audio/Video RCA output to TV.
Loop-through output to VCR, etc.
To connect the Audio/Video RCA output to TV.
Digital audio output.
9
\
Remote Control Unit
10
Remote Control Unit
1
2 0–9
3 MULTI
4 EPG
5 MENU
6 VOL(◄/►)
7 OK
8 FAV
9 RECALL
10 SAT
11 ZOOM
12 SLOW
13 TXT
14
15
16
17 USB
PICTURES
To switches between power-on and stand-by modes.
To choose a channel directly,or to numeria information
a menu.
MULTI –PICTURE
To show the TV and radio program guide
To display the main menu,or return to a previous menu.
To change the volume in viewing mode,or to change an
tion or setting in a menu.
To show the channel list in viewing mode,and to select
an item(or confirm a choice) in a menu.
To display the favourites list in viewing mode,and to
select a favourite
To return to the prebious channel or station
To display SAT list.
Press to Zoom-in and Zoom-out picture.
To show the playback of a movie
To fast rewind a movie or music track
To go to the start of a movie or music track,or show the
previous photo
To go to the end of a movie of music track ,or show the
next photo.
To display the USB list
11
3
Remote Control Unit
18
BOOK
MARK
19 MUTE
20 TV/SAT
21
INFO To show information about the current program.
22 EXIT
23 SUBTL
24 PAGE
( / )
25 AUDIO
26 TV/RADIO
27 PAUSE
28 RECORD
29 ►
0
To turns sound on or off.
Switch between TV and SAT mode.
( This function only valid to Terrestrial TV program that is
connected
and deliver by Modulator of this STB )
To close the current menu and return to normal viewing.
To turn subtitles on or off.
To move to the next page or previous page ( if there is
more than one page), or to zoom in or out
To choose speakers (left,right of stereo),audio format
and audio language.
To switches between TV and Radio (and vice versa)
To freeze the screen
To start recording a movie
To start or pause a movie or music track
To fast forward in a movie or music track
31
32 TIMESHIFT
To stop a movie or music track ,or to stop recording a
movie
To Stop playing the USB Media
12
S.T.B Connection
Step 1: Connect to the antenna
Connect the satellite dish lead coming from the wall plate to the LNB INPUT
socket on the SRT 4300(socket1).
Step 2: Choose your Connection
There are a number of methods for connecting the SRT4300, depending on
your preference and the connection types on your TV. These methods are
labeled A, B below.
A: Y / Pb / Pr (Component) using the supplied RCA blue–red–green lead
For Component video, connect with the supplied Y / Pb / Pr Component cable
(green, blue and red leads). Connect the leads to the Y, Pb and Pr sockets on
the SRT4300, and then to the corresponding Component sockets on your TV.
Please pay attention to the color-coding. You will also need to establish a
connection for left and right audio via the audio sockets. This can be done using
the supplied RCA cable.
For right audio, connect the red RCA lead and for left audio, connect the white
RCA lead.
B: CVBS (Composite) using the supplied RCA red–white–yellow lead
Using the appropriate color-coding, you can connect to your TV with the
supplied RCA cable.
For video, connect the yellow RCA lead to the yellow video socket on the
SRT4300 and the corresponding socket on your TV.
For right audio, connect the red RCA lead to the red audio socket on the
SRT4300 and the corresponding socket on your TV.
For left audio, connect the white RCA lead on the SRT4300 and the
corresponding socket on your TV.
Various equipment and TV/VCR can be connected to STB.
This manual will explain common ways to connect to the equipment.
If you experience any problem, please contact your sales agency.
13
User Settings
Plug in the STB. Then press the “power” button on the remote control or the
“Standby” button on the STB Front Panel. The Main Menu screen, the
beginning of the OSD screen, will appear as shown in the following picture. The
Main Menu displays various functions of the STB or you can select with “CH”
buttons and the numeric buttons on the remote control. To proceed to the next
stage, press the “OK” button on the remote control.
Plug in the STB, and power on, there are foreign languages for your choice,
choose the one you prefer. Then please press “Menu” on the remote control to
get started,(default lock code: 0000).will
appear as shown in the following picture.
.1.1. OSD setting
Select the preferred languages and OSD
transparency.
1.2. A/V output setting
To set the basic specifications of your
STB
1.3. Local Time Setting
To set the local time and date to your STB, then save it.
Time Zone
Choose the time zone of your country
belong to.
Local Date
Set the Local Date.
Local Time
Set the Local Time.
Summer Time
If you set summer time to “ON”, then your
local time should add one hour more.
Date format
Choose the format to display the Date.
14
User Settings
1.4.Timer Setting
Timer Number
From 1 to 8, you can set total 8 different
Timers
Timer Set
To open or close each Timer, if the Timer
Set is off, then you can not continue to set
Timer.
Timer Control
There are total 3 types of Timer type: Start time only; Stop time only; Both on.
Repeat Mode
There are 3 types of Repeat Mode: one time, week(1-5), week(6-7).
Start time
To set STB power on time.
Stop time
To set STB power off time.
Channel
To select the channel what you want .
TV/RADIO
To shift between TV or radio.
1.5. Parental Control
To prevent the unauthorized Accessing of
your STB, you can set the Parental
control password to you receiver. (Default
password: 0000)
Channel Manager Lock:
Channel Edit menu to prevent
unauthorized adjusting of Channel.
Installation Lock:
menu to prevent unauthorized adjusting of Installation.
:
:
To lock the
To lock the installation
15
User Settings
System Setting Lock: To lock the System Setting menu to prevent unauthorized
adjusting of System Setting.
Channel Lock:
for Children.
Receiver Lock:
Factory Default Lock:
operation.
You can also change the password by input numeric key for NEW Password,
and then repeat again to VERIFY Password.
To lock the channels to prevent the channels that are not suitable
To lock the receiver to prevent from unauthorized watching.
To lock the Factory Default menu to prevent unauthorized
16
Installation
2. Installation
Your STB can be easily installed by using
“Installation” Menu.Press the VOL move
to installation.
2.1.Antenna setting
Selecting your installed Satellite on the
right side, and press “Vol+” button to
enter into left side, then set all the other
figures such as LNB type;LNB low,LNB
high,Tp,DiSEqc; 22KHz; DiSEqC control; LNB Power and so on, using the ”Vol”
buttons on the remote control then press yellow button to save the settings.
ALL + NIT: To Search out all the Free
Channels + Scrambled Channels
available in particular Satellite or
Transponders including the new
transponders that are not
preprogrammed in your STB but
broadcasting by Satellite Provider.
Then press ”OK” button to start searching,
while the related menu shows a details
info of the scanning status.
2.2 Satellite list
Add satellite
Press the yellow button to add the new
Satellite to this STB.
Edit satellite
In this menu, you can view the satellite
information, and edit the satellite by
Rename and Modify Using the “Vol” or
17
Installation
numeric buttons.
Rename
To change the name of the Satellite
Modify
To modify the longitude and direction of
the Satellite
Delete satellite
Press the yellow button to delete the
Satellite from this STB forever.
Muti satellite search
Press the yellow button to select the
satellite name then scan button to select the scan mode “ALL,FTA,CAS”and
pree OK button ,the scanning will beginning.
Blind scan
2.3.Transponder list
You can edit with various option choices of transponder specifications and
settings, also you can easily manually search a single transponder by selecting
SCAN.
Add TP
Press yellow button to add a TP.
Input the frequency value and symbol rate
value by numeric key, choose the correct
Polarization, Horizontal or Vertical, then
save it.
Edit TP
Press the yellow button you can edit the
current TP. Input the frequency value
18
Installation
and symbol rate value by numeric key, choose the correct Polarization,
Horizontal or Vertical, then save it.
Delete TP
Press yellow button you can delete the channel you do want to view.
2.4 Setup Motor
To set up the auto Satellite Dish (DiSEqC1.2 system) and generate the
positioner system.
Continuously Move
Using the ”Vol” buttons to adjust West
and East to move the dish, the signal and
quality bars at the bottom of the screen
judge the best position of the dish.
Step Size
Adjust the Move Step from 1 to 10.
Move steps
Dish move step by step, adjust the dish to
the best position.
Limit set
Using the ”Vol” buttons to fix East or West limit or disable limit status.
2.5 USALS Setup
To set up the USALS system onto your STB.
If you have a USALS motorized system, you must set your position (latitude and
longitude) in order to calculate all motor positions for viewable satellites. You
should refer to the motor’s manual .
Set the correct value of Longitude and Latitude of your position, press OK key,
then you can see the moving direction and angle to your selected satellite from
Motor menu.
19
Channel Manager
3.1 TV Channel dit
You can easily access to any TV and
Radio programs by the variable functions
available from this STB, and enjoy your
digital entertainment TV fun.
3.1.1 Edit channel
Press Red button, then you can use the
color buttons to Rename, Modify and
Lock the channels.
Rename: Press Red button, you can change the name of selected channel.
Modify: Press yellow button, you can re-set PID settings of selected channel by
numeric key.
Lock: Press OK button to select the channel you wish to Lock, then press blue
button, you can lock the selected channel from authorized watching.
Return: Press red button, you can return to previous menu.
3.1.2 Delete channel
Press red button to select the channel
you wish to delete, then press yellow
button to delete the selected channel
from STB.
3.1.3Move channel
Press red button to select the channel
you wish to move, then press yellow
button to pop-up Move-To menu and input
channel numbers you wish to move, and
press OK button again to insert.
20
Channel Manager
3.1.4Skip channel
Press red button to select the channel you wish to skip, then press yellow button
to skip the channel that you do not wish to view.
3.1.5Lock channel
Press red button to select the channel you wish to lock,then press yellow button
to lock the channel that you do not wish to view.
3.1.6Set favorite
The easy to use functions of Set Favorite enhance the flexibility of operating
huge amount of TV and Radio Channels in your STB. Personalize it with your
own way of interests can increase the joy of Digital Entertainment.
here are total 8 groups of Favorite Sorting:
Movie accord to Fav 1
Teleplay accord to Fav 2
Sports accord to Fav 3
Music accord to Fav 4
Law accord to Fav 5
Cartoon accord to Fav 6
News accord to Fav 7
Amusement accord to Fav 8
Example to make Channel 1 to News group -- FAV 1:
Move “CH” to Channel 1, then move “Vol” to select the group of FAV 1, press
Red button then you will see a logo displayed at the left beside channel 1, then
press Yellow button to save, Now channel 1 is already within FAV 1 group.
3.2 Radio Channel Edit
Press the TV/RADIO button on remote control to change the TV mode to Radio
mode, and then get into the “Channel Manager” menu, the same procedure as
TV Channel Edit.
3.2.1 Channel List
Press OK button on the remote control, the channel list will be displayed, there
are total 10 channels as well as brief information of channel in one page, and
21
Channel Manager
press ”CH”buttons to move in the list, and press “OK” button to select current
channel, press “OK” button again, to exit Channel List Menu to enjoy watching.
With colored buttons (Red; Blue; Yellow;
Green) presented at the top of menu, you
can easily select the different sorting
facilities, operating the related color
buttons on remote control to select the
desired functions.
SAT - Red
Press Red button to display ALL channels
by original scanning order. If you search
more than one satellite, also the satellite sorts the channels.
Alphabet - Green
Press Green button to highlights Alphabet
to choose from A-Z sort the channels by
Alphabetic order, you can also choose “A”,
“B”, …… “Z” to sort the channels.
TP - Yellow
Press yellow button to display all of the
TP, and the channels are sorted by the
TP,
CAS - Blue
Press Blue button to highlights CAS to choose FTA or CAS System, and FTA
Only or CAS Sorting to sort the channels.
FTA: The channels are free to watch.
CAS: The channels are Scrambled coded.
22
Channel Manager
FAV Group
Press FAV button to highlights FAV group, and the channels are sorted by the
FAV
group.
Set Radio Favorite
Operation procedure is same as Set TV
Favorite.
23
4. System
With system menu, you can set whatever you want the features and
specifications of your STB to be most suitable for your watching programs.
4.1 System Infornation
To show the detail system information for the STB.
4.2 Factory Default
To default the factory settings, by choosing
ALL or CHANNELS, and press ”OK” button
to proceed.
All
To default software settings and channels to
be factory settings.
Channel
To default only channel to be factory settings.
24
USB
To play multimedia files, games, record
program, update software through USB
port.
Go to USB music menu, choose path to
music files, select one and press “USB
Play” or “OK” button to start play. Press
“Exit” or “USB Stop” to stop and back to
music menu.
5.1PVR Preview
In PVR preview menu, select recorded file, and press “OK” to preview. Press
OK button turn to full screen.
In preview menu, the operations of skip, pause, forward, backward, previous,
next etc, are not available.
Format supported
MP3
Backward and forward
Press “Backward”/“Forward” to play
backward/forward at max x20 speed.
Skip
Press “Former or “Next” button, when
playing, to skip to play previous or next
music file.
Pause
Press “USB Pause” to freeze music playing, and “USB Play” to resume.
5.2 PVR Partition Select
Before to record TV program, connect hard disk to receiver, and go to PVR
partition select menu, choose disk partition, where the recorded file is supposed
be saved. Only root directory is available, can’t set path to folders.
25
USB
Start and sto
Press “USB Play” to start recording, “USB STOP” to finish.
Information
Press “Info” button to check details information when recording, such as
recorded time, available free memory size etc.
Format of recorded file
Recorded file will be saved in format of MPG.
5.3USB Meida
Music
Go to USB music menu,choose path to music files,select one and press “USB
Play” or “OK”button to start play.Press “Exit” or USB Stop” to stop and back to
music menu.
Format supported
MP3
Backward and forward
Press “Backward”/“Forward” to play backward/forward at max x20 speed.
Skip
Press the “Former” or “Next” button,when playing,to skip to play previous or next
music file.
Pause
Press “USB Pause” to freeze music
playing,and “USB Play” to resume.
Picture
Go to USB pictures menu, choose path to
photo files, for the picture selected, there
is preview in right side, and use “OK”
button to full screen display. Press “Exit”
or “USB Stop” to stop and back to picture
menu.
Format supported
JPG
p
26
USB
Skip
When display the picture in full screen, use “Former” /“next” buttons to skip to
display previous/next picture.
Slide play
When in full screen display, use “USB play” to start slide play. Use “USB pause”
to stop, “USB stop” or “Exit” to quit full screen and back to picture menu.
Movie
Go to USB movie menu, choose path to
video files, select one and press “USB
Play” or “OK” button to start full screen
play. Press “Exit” or “USB Stop” to stop
and back to movie menu.
Format supported
AVI, VOB, MPG, DAT
Backward and forward
Press “Backward”/“Forward” to play
backward/forward at max x20 speed.
Skip
Press “Former”/“Next” button, when playing, to skip to play previous/next video
file.
Pause
Press “USB Pause” to freeze playing, and
“USB Play” to resume.
5.4 USB Game
Go to USB game menu, choose path to
Native32 game files, select one and press
“ “OK” to play. Press “Exit” or “USB Stop”
to stop and back to USB Game menu.
27
USB
Format supported
Native32 games (SMF)
You can go to www.native32.com
download more free USB game.
USB Game become Black and White ?
Solution: Make sure the STB TV type set to the same system ( PAL; NTSC;
AUTO, etc.. ) of TV Color system.
5.5 Software upgrade
Choose path to new software file, which is
saved in USB device, select and press
“OK” to proceed
It should be the first thing after updating
to set factory default.
5.6 Database backup
to
28
S
PVR Instruction
Supported Device:
1) Most of popular USB2.0 Hard Drive Disk can be supported by our STB,
however due to there are too many types of HDD available in the market, if
you find one particular HDD can not work with our STB, please kindly
provide it to us, and we will be happy to solve it for you in shortest time.
2) System required: FAT32
3) Speed required: 5400rpm
Instructions to TV program
1) Any SD TV program (Standard Definition) with a bit rate lower then 6Mbps
can be recorded by this STB.
2) During recording, EPG; TXT; Multi AUDIO functions can not be operated.
3) Recorded TV program will not support EPG: TXT: Multi AUDIO.
Recording Capacity
1) Our STB can support up to 4 partition of one HDD, and theoretically each
partition can allow up to 2TByte (2,000Gb), however, we suggest to use
one HDD with each partition not bigger than 120Gb
2) Each recorded video file will not bigger than 3.8Gb (Approx 4 hours), the
STB will automatically create new video file to continue recording your TV
program if the recorded video file is bigger than 3.8Gb.
How to choose and set different partition from my HDD ?
Usually there are several partition available in HDD, and our STB can
allow you to choose different partition for recording purpose, choose
from PVR partition menu, menu of Device List will pop-up, it lists all
partitions your HDD has, choose the one you want, and press OK button
to save. Then the recorded video file will be stored into this partition.
WARNING
USB1.1 or USB2.0 Key or Stick (Including MP3 player)
1) We strongly suggest not to record any TV program by USB Key or Stick,
because a huge of different USB Key or Stick are indeed available in the
market with different quality level, we do not guarantee any damage of your
USB Key or Stick from the attempting recording.
2) Do not remove your USB device from STB while it is in use of any USB
multimedia function.
29
TIMESHIFT
TimeShift
Never miss an Excellent moment of your favorite LIVE Sports or Movie scene,
now with WIZ-555 FTA PLUS, you can easily enjoy it with just one press of
button.
TIMESHIFT MODE:
Make sure you have USB device plugged
into the STB, and there are free storage.
Press TIMESHIFT to pause, the video
screen will freeze, and recording will begin.
Press TIMESHIFT again, to continue
watching TV show from the point at which it
was paused.
Press EXIT to stop TIMESHIFT mode, and return to live program.
TIMESHIFT FUNCTION
During TIMESHIFT mode, you can pause; backward; forward; slow the TV
content.
The bigger USB device free storage, the more TV content it can record.
USB Device Speed Checking
Press PAGEDOWN to pop up the Device List, where you can find the speed of
your USB Device, RED means it can read, YELLOW means it can RECORD,
GREEN means it can TIMESHIFT, it is suggest to use the match speed USB
Device to operate each function, otherwise, the function may not performed
normally.
30
6. Games
This receiver contains two highly enjoyable games, which you can get the joy
while relaxing.
6.1 Teris
The classic game of all time, Teris is one of most highly playable game.
6.2 Snake
The classic game of modern times, do not get snake too long.
31
Troubleshooting
When you found some problems about this STB, please check the table as
below. Because these may not be any serious problems:
Fault Phenomenon probably reasons Resolve
Power on, but no
display on screen
Power on this STB,
then that screen
displays
”No signal”
STB plays a strange
sound
USB Game Become
Black and White
Please carefully check the
power plug, to see it is in
socket of wall or not? Is
power interrupted?
Is the aerial install correct? Reinstall the aerial and calibrate
LNB input is not connect Connect the LNB
The transmit station turns
off
The sky wave disturbs the
device
The program setups are
incorrect
Due to the channel contain
more audio tracks or audio
languages
The TV color sysem
setting is not same as STB
TV type
Put firmly the power plug to the
socket on
the wall.
it
Attempt until the signal coming
again
Attempt again later
Set the proper
parameters of received program
in the system
settings menu
User can use the “Audio”
button on the RCU to select the
correct audio track or audio
languages
Make sure the STB TV system
set to the same system ( PAL;
NTSC; AUTO ) of TV system.
Tips: If you refer to this troubleshooting, but no resolve that problem you
encountered. Please contact the local dealer or technical support instantly,
do not open the machine, because that is very dangerous to you or to the
machine in that cases.
32
Glossary
(1) 22KHz switch
A tone that can be sent via the LNB coax, this tone can control the LNB or
switches on the coax cable. Do not interfere with the DC or 22KHz tone that the
receiver sends to the dish.
(2) Antenna
A device that collects and radiates electromagnetic waves includes a satellite
dish and a broadband antenna.
(3) CVBS
Composite Video Baseband Signal, Standard single-wire video, mixing lum and
chroma signals together.
(4) DiSEqC
Digital Satellite Equipment Control, a protocol established by EUTELSAT
organization www.eutelsat.com
Switching solution, DiSEqC 1.2 for Dish actuator solution, and DiSEqC 2.0 for
Satellite Receiver solution.
(5) Forward Error Correction (FEC)
A system of error control for data transmission
(6) Frequency
The number of cycles or events per one second, which is expressed in the unit
of Hertz(Hz)
(7) Intermediate Frequency (IF)
A frequency to which a carrier frequency is shifted as an intermediate step in
transmission or reception
(8) Low Noise Block (LNB) Downconverter
A low noise microwave amplifier and converter which downconverts a range of
frequencies to IF range
(9) NTSC
National Television Standards Committee, a video standard established by the
United States (RCA/NBC) and adopted by numerous other countries.
(10) PAL
Phase Alternate Line, a video standard used in Europe and other parts of the
world for composite color encoding.
, the most popular standard are DiSEqC 1.0 for
33
Glossary
(11) Packet Identifier (PID)
A set of numbers that identifies transport stream packets containing data from a
single data stream
(12) Polarization
Satellite waves are polarized. They can be linear or circular. Linear polarity is
Vertical or Horizontal, circular polarity is Right-hand and Left-hand circular
polarity.
(13) Quaternary Phase Shift Keying (QPSK)
Phase-shift keying in which four different phase angles are used.
(14) RF
A frequency that is useful for radio transmission, usually between10KHz and
300,000Mhz.
(15) RGB
Video information in the form of Red, Green and Blue tristimulus values, The
combination of three values that representing the intensity of each of the three
colors can represent the entire range of visible light.
(16) STB
Set Top Box, another common name of Digital Satellite Receiver, because it
usually be put on top of TV in household. This word is used now worldwide.
(17) Symbol Rate
The amount of data transmitted every second.
(18) Transponder (TP)
Equipment in a satellite which receives a single uplink channel from a satellite
earth station, amplifies it, converts the frequency and changes the polarization,
then broadcasts it back to earth.
(19) Transport Stream
The bit stream formed prior to transmission of signals by combining the video,
audio and data streams of one service. It consists of fixed length packets of 188
bytes of data.
34
Specification
1. Tuner & Demodulator
Input Frequency Range 950MHz ~ 2150 MHz
RF Input Signal Level -65 ~ -25dBm
RF Impedance 75Ω
RF Bandwidth 55MHz/8MHz(Under 5 Msps)
LNB Power 13/18DC, +/-5%, 0.5Amax,
1.8Apeak overloaded protect
LNB Tone Switch 22KHz +/- 2KHz, 0.65Vp-p+/-0.15V
DiSEqC Contro V1.0, V1.2, Tone burst A/B
Demodulation QPSK
Symbol Rate 1 ~ 45Msps/SCPC, MCPC
2.. MPEG
Transport Stream MPEG-2 ISO/IEC 13818
Transport Stream Specification
Input Rate Max.45Mbit/s
Video MPEG-2 MP@ML
Audio MPEG-1/2 Audio Layer1 or layer2
Aspect Ratio 4:3, 16:9, Auto
Video Resolution 720 x 576(PAL), 720 x 480(NTSC)
Audio Mode Stereo, Dual channel, Joint stereo,
Mono
Audio Sampling Frequency 32/44.1/48KHz
3. Connector
LNB IF input F type, IEC 169-24 Female
LNB IF Loop-through F type, IEC 169-24 Female
TV SCART CVBS, RGB, Audio L,R
RCA AUDIO L, R, CVBS, 0/12V
4 Power Supply
Input Voltage 100-240V~, 50/60Hz.
Power Consumption Max.15W
Weight Appr. 1.5KG
Operating Temperature
StorageTemperature
35
0℃ - 40℃
-40℃- 65℃
60 WEDGEWOOD ROAD, HALLAM, VICTORIA 3803
STRONG TECHNOLOGIES PTY LTD.
PH: +61 3 8795 7990 FAX: +61 3 8795 7991
TECHNICAL SUPPORT: 1 800 820 030
STRONG & CO. (FAR EAST), LTD.
P. O. BOX 85, YOKOHAMA, KANAGAWA-KEN
JAPAN 231-91
www.strong-technologies.com
Email: techau@strong-technologies.com
© Strong Technologies Pty Ltd., 2008
FAX: +81 45 651-1842
36
Loading...