Strong SRT 24HC3023 operation manual

Page 1
LED TV with DVB-T2/C/S2 SRT 24HC3023
User Manual
Bedienungsanleitung
Manuel ulisateur
Manual del Usuario
Инструкции за употреба
Uživatelská příručka
Korisnički priručnik
Használa útmutató
Gebruiksaanwijzing
Instrukcja obsługi
Manual do Ulizador
Manual de Ulizare
Uputsvo za upotrebu
Používateľská príručka
Navodila za uporabo
Посібник користувача
Руководство пользователя
Page 2
Page 3
Page 4
www.strong.tv
Supplied by STRONG Austria
Represented by STRONG Ges.m.b.H.
Franz-Josefs-Kai 1
1010 Vienna, Austria
Email: support_at@strong.tv
12 Dec 2019 14:11
Page 5
Licenses
THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE AVC VIDEO
THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM
This product contains one or more programs protected under international and U.S. copyright laws as unpublished works. They are condential and proprietary to Dolby Laboratories. Their reproduction or disclosure, in whole or in part, or the production of derivative works therefrom without the express permission of Dolby Laboratories is prohibited. Copyright 2003-2009 by Dolby Laboratories. All rights reserved.
English
SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, STRONG declares that the device SRT 24HC3023 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.strong.tv/en/doc Subject to alterations. In consequence of continuous research and development technical specications, design and appearance of products may change. Manufactured under license from Dolby Laboratories. Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI High-Denition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc in the United States and other countries. All product names are trademarks or registered trademarks of their respective owners. © STRONG 2020. All rights reserved.
1
Page 6
To obtain the best performance and safety, please read this manual carefully. Please keep this manual for future reference.
TABLE OF CONTENTS
1.0 INSTRUCTION 3
1.1 Safety Instructions 3
1.2 Storage 4
1.3 Accessories 4
1.4 Equipment set-up 4
2.0 INSTALLATION 5
2.1 Default PIN code: 0000 5
2.2 Front panel/underside 5
2.3 Rear Panel 5
2.4 Remote control 5
2.5 Installing the batteries 6
2.6 Using the remote control 7
3.0 FIRST TIME INSTALLATION 7
3.1 DVB-S/S2 installation 7
3.2 DVB-T/T2 installation 8
3.3 DVB-C installation 8
4.0 ELECTRONIC PROGRAMME GUIDE EPG 8
5.0 MENU SETTINGS 9
5.1 Menu control (DTV mode) 9
5.2 Channel 9
5.3 Picture menu 10
5.4 Sound menu 11
5.5 Time menu 11
5.6 Lock 12
5.7 Setup Menu 13
6.0 MEDIA 14
6.1 Reminder when using the USB player 14
6.2 USB menu 14
7.0 TROUBLESHOOTING 17
8.0 SPECIFICATIONS 19
2
Page 7

1.0 INSTRUCTION

1.1 Safety Instructions

Read all of the instructions before operating the set. Keep these instructions well for later use.
Only use attachments/accessories specied or provided by the manufacturer (such as the
exclusive supply adapter, battery etc.).
Please refer to the information on the exterior back enclosure for electrical and safety
information before installing or operating the apparatus.
To reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture.The ventilation should not be impeded by covering the ventilation openings with items, such
as newspaper, table-cloths, curtains, etc.
The apparatus shall not be exposed to dripping or splashing and no objects lled with liquids,
such as vases, shall be placed on the apparatus.
The mark indicates a risk of electric shock. The external wires must be installed by an
instructed person or ready-made leads or cords must be used.
To prevent injury, this apparatus must be securely attached to the oor/wall in accordance with
the installation instructions.
Danger of explosion if the battery is incorrectly replaced. Replace only with the same or
equivalent types.
The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as
sunshine, re or the like.
Excessive sound pressure from earphones and headphones can cause hearing loss.
Listening to music at high volume levels and for extended durations can damage one's hearing.
In order to reduce the risk of damage to hearing, one should lower the volume to a safe,
comfortable level, and reduce the amount of time listening at high levels.
The mains plug or appliance coupler is used as disconnect device, it shall remain readily
operable. When not in use and during movement, please take care of the power cord set, e.g. tie up the power cord set with cable tie or something like that. It shall be free from sharp edges or similar which can cause abrasion of the power cord set. When put into use again, please make sure the power cord is not damaged. In case of damages, please get the power cord replaced by a similar one with the same specications. The absence of a light indication on the apparatus does not mean that it is fully disconnected from the mains. To disconnect the apparatus completely, the mains plug must be pulled out.
Attention should be drawn to environmental aspects of battery disposal.No naked ame sources, such as lighted candles, should be placed on the apparatus. To prevent the spread of re, keep candles or other open ames away from this product
at all times.
A USB terminal can provide a maximum of 500 mA. Equipment with this symbol is a Class II or double insulated electrical appliance. It has
been designed in such a way that it does not require a safety connection to electrical earth.
Operating Environment
Do not install this equipment in a conned space such as a bookcase or similar unit.Do not use the set near damp, and cold areas, protect the set from overheating.Keep away from direct sunlight.Do not use the set near dust place.Do not attach candle to accessible opening area, to avoid ammable foreign material from
entering the TV.
English
3
Page 8
WEEE Directive
Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to
promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

1.2 Storage

Your device has been carefully checked and packed before shipping. When unpacking it, make sure that all the parts are included and keep the packaging away from children. We recommend that you keep the carton during the warranty period, to keep your device perfectly protected in the event of repair or warranty.

1.3 Accessories

1x installation instructions1x safety instructions/warranty cards1x remote control2x AAA batteries

1.4 Equipment set-up

Fig.1a
Install the display on a solid horizontal surface such as a table or desk. For ventilation, leave a space of at least 10 cm free all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set. This apparatus can be used in tropical and/or moderate climates.
Stand assembly instruction
Fig.1b
1. Carefully place the TV with its front side facing down on a cushioned at surface in order to protect the TV and the TV screen from damage.
2. Take out the 2x feet and assemble them to the TV.
3. Fasten the feet to the bottom of the TV using the 4xPA4x14mm screws.
This user manual provides complete instructions for installing and using this TV. The symbols serve as follows.
WARNING Indicates warning information.
NOTE Indicates any other additional important or helpful information.
MENU Represents a button on the remote control or the TV.
(Bold characters)
Move to Represents a menu item within a window.
(Italic characters)
Fig.1c
4
Page 9

2.0 INSTALLATION

2.1 Default PIN code: 0000

2.2 Front panel/underside

NOTE: The graphics are for representation only.
1. Power indicator /remote sensor
2. Speakers
3. Buttons: Input source, Menu, V-/V+, CH-/CH+, Standby/ON.

2.3 Rear Panel

NOTE: The graphics are for representation only.
1. DC IN Connect to an outlet.
2. HEADPHONE Speakers will be muted when earphone is plugged in and headphone
selected.
3. VGA Connect a VGA source, like computers may have
4. SCART Connect devices like DVD or VCR using SCART cable
5. PC AUDIO Connect to audio output of PC
6. SAT IN Connect a satellite dish to the TV for searching programmes.
7. ANT/CABLE IN Connect a terrestrial antenna or cable connection from your provider to the
TV for searching programmes.
8. S/PDIF (coax. output)
Use an RCA cable to connect your TV to a compatible digital amplier or
Home theatre set.
9. COMMONINTERFACE (CI+)
Connect a Conditional Access Module (CAM).
10. HDMI Connect HDMI input signal from a signal source such as DVD, Blu-ray player
or game console.
11. USB Connect a USB device for playback of multimedia les
12. AV IN 3.5 mm female jack entry for composite video and left/right audio
connection.
13. YPbPr Connect YPbPr sources.
English
Fig.2
Fig.3

2.4 Remote control

1. q Press to turn the TV on or standby.
2. ! Press to mute or restore the volume.
3. DTV Press to go back to Digital TV.
4. (ASPECT)
5. (PICTURE) PIC Change picture mode.
Change aspect ratio.
Fig.4
5
Page 10
6. SOUND Change sound mode
7. 0 ~ 9 Choose channel directly.
8. DIGIT_IMG Change the maxium input programme digit
9. 9 Press to go back to previous viewed channel.
10. INFO Display information about the current source.
11. FREEZE Press to hold the picture
12. TV/R Switch between TV and radio.
13. COLOUR BUTTONS Press to execute the prompt function in TV or DTV menu mode.
14. SLEEP Select the sleep time, such as 10 min, 20 min etc.
15. SOURCE Press to change signal source
16. ENTER Conrm the selection.
17. pqtu Navigate the menu.
18. MENU Open the menu options. Step back in some menu options.
19. Exit the current menu.
20. VOL +/ Adjust the volume up or down.
21. (SUB.PAGE) SUB.P Press this button to enter or exit subpage mode (if subpage is available. Press
22. EPG Press to display the current EPG information in DTV mode.
23. CH +/ Change programmes up or down. Big steps in Channel list.
24. HOLD Press to hold the teletext page on screen without update and changes. Press
25. (REVEAL) TIP In teletext mode, press to reveal the hidden information.
26. SIZE Enlarge the teletext display. Press this button once to enlarge upper half of
27. INDEX Press this button to display index page.
28. 7 Press to play the previous le.
29. 8 Press to play the next le.
30. TEXT Press to enter or exit the teletext menu.
31. FAV Press to view your assigned favourite list or main list channels. Press pq to
32. AUDIO Press to select available audio languages. Selecting audio description, a
33-35. No function
the tu buttons to select a subpage.
again to release the hold state.
the screen. Press this button again to enlarge lower half of the screen. Press this button again to resume to normal screen size.
cycle through your assigned favourite channels, press OK to conrm.
narrator will describe what is happening on the screen for blind or visually impaired viewers. Press again to turn it o (depending on broadcast).

2.5 Installing the batteries

Place 2x AAA batteries in the battery compartment of the remote control. Make sure to match the polarity markings inside the compartment.
NOTE: Pictures are only for reference. Actual items may dier.
1. Open the cover.
2. Put 2x AAA batteries in the compartment and make sure the polarity is correct.
3. Close the cover.
6
Fig.5
Page 11
Precautions for using the battery
Improper using of the battery will cause leakage. Carefully follow these instructions.
1. Please note the batteries' polarity to avoid short circuit.
2. When the battery's voltage is insucient which aect the use range, you should replace it with a new battery. Remove the batteries from the remote control unit if you do not intend to use it for a long time.
3. Do not use dierent types of batteries (for example Manganese and Alkaline batteries) together.
4. Do not put the battery into re, and charge or decompose the battery.
5. Please dispose batteries abide by relevant environmental protection regulation.

2.6 Using the remote control

Use the remote control by pointing it towards the remote sensor. Items between the remote
control and the remote sensor could block normal operation.
Do not cause the remote control to vibrate violently. Also, do not splash liquid on the remote
control, also do not put the remote control in a high humidity place.
Do not place the remote control under direct sunlight which will cause deformation of the unit
by heat.
When the remote sensor is under direct sunlight or strong lighting, the remote control will not
work. If so, please change the lighting or TV's position, or operate the remote control closer to the remote sensor.

3.0 FIRST TIME INSTALLATION

After all connections have been properly made, switch on your TV. The language selection will appear on screen. Use tu to select the OSD Language of your preference. Press q and then use tu to select the country where you will use this TV. This is important to set settings as time zone and text character correctly. Press q to change Environment from Home to Shop modus to demonstration TV in shop, otherwise keep as it is.
Press ENTER for next step to go to Tuning setup.
In Tuner setup selection you select which tuner input source you like to use.
Tuner Type If you still have analogue signals in DVB-T or DVB-C. Select here between
options of Digital /+ Analogue systems.
Digital type Satellite to receive satellite broadcasts if you are equipped with a satellite
dish),
DVB-T to receive terrestrial broadcasts with indoor or outdoor antenna.
DVB-C to receive cable broadcasts if you have cable connection from local
provider.
Next step is depending of your choice in Tuner setup.
English

3.1 DVB-S/S2 installation

Satellite
Press q to select Satellite and use tu to highlight the satellite your dish is aimed at. Use pq tu to highlight the options of choice and press ENTER to start the channel search.
Scan Mode Choose between Default (recommended), Blind Scan and Network
Channel type Select Free to search Free-To-Air channels only Free + Scrambled to search FTA
and Encrypted channels or Scramble to search Encrypted channels only.
7
Page 12
Service Type Select All to search DTV channels and Radio. Select RADIO to search radio
It is recommended to use the default settings.
channels only or DTV for only Digital TV channels.

3.2 DVB-T/T2 installation

Terrestrial Setting
Press ENTER to start directly searching for digital channels.
Optional you can search also for analogue channels. Press p and select the Tune Type. By pressing tu select DTV, AT V or DTV+ATV (DTV to search digital broadcasts and ATV to search
analogue broadcasts).

3.3 DVB-C installation

Cable Setting
Press pq tu to highlight your settings.
Scan type You can select Network Scan, Blind scan or Full. Network ID The default setting is Auto. To enter your own value press tu and enter
Frequency The default setting is Auto. To enter your own value press tu and enter
Symbol Rate The default setting is Auto. To enter your own value press tu and enter
Optional you can search also for analogue channels. Press p select the Tune Type. By pressing tu select DTV, AT V or DTV+ATV (DTV to search digital broadcasts and ATV to search
analogue broadcasts).
(with 0 ~ 9) the used Network ID from your provider.
(with 0 ~ 9) the main frequency used by your provider in KHz.
(with 0 ~ 9) the used Symbol Rate from your provider. (Ks/s) most used values are 6900 or 6875.
NOTE: Please, check the settings for your cable system used by your provider! Full
Press ENTER to start searching for digital channels.
scan will have a duration of approximately 20 minutes, depending on your cable network.
4.0 ELECTRONIC PROGRAMME GUIDE EPG
EPG stands for Digital Electronic Programme Guide. It is supplied by the programme providers and oers information on broadcasted programmes. You can access it in digital mode by pressing EPG on the remote control. Press EPG to bring up the EPG interface. Use pq to select a channel.
Press u to switch to overview from one channel EPG. Use DOWN/UP to select event where you like to know more details. These details are displayed on top of this EPG banner or press INFO button for full screen. Press EXIT to stop and return to viewing modes.
Then press the COLOUR BUTTONS for entering the required settings.
8
Page 13
GREEN Set a reminded to event or set even Timer function.
YELLOW Overview of previous day
BLUE Overview of next day

5.0 MENU SETTINGS

Below items depend if they are available of select input source. Use SOURCE to select other source. Selections are Satellite, DTV, ATV, AV, PC, SCART, Component, HDMI and Media.

5.1 Menu control (DTV mode)

Press MENU to enter the main menu. Press tu to select an item. Press pq and ENTER to select the submenus. Press MENU to exit the item.

5.2 Channel

Press MENU to display the main menu. Press tu to select Channel in the main menu. Press pq to select the option you wish to adjust in the Channel menu.
Press ENTER to adjust. After nish your adjustment, press MENU to save and return to the previous menu. Below items depend if they are available of select input source. Use SOURCE to select other source.
5.2.1 Auto Tuning
Press pq to select Auto Tuning. If the TV use DVB-T or DVB-C tuner please refer to chapters 3.2 and 3.3; for Satellite (DVB-S) tuner please refer to chapter 3.1.
5.2.2 Dish Setup
If you use Satellite as input source, the Dish Setup menu allow you to set you satellite and belonging settings as DiSEqC port and LNB type. Afterwards you may start the Auto Tuning or Manual Tuning by selecting with EPG button the wanted transponder.
English
5.2.3 DTV Manual Tuning (in DVB-T mode only)
Search and store programmes manually. Press pq to select DTV Manual Tuning. Then press ENTER to enter the sub-menu.
Press tu to select a Channel No., and then press ENTER to start the search. The search stops when a programme is found and this programme will be stored in the current channel position. Press MENU to exit.
5.2.4 ATV Manual Tuning (in DVB-C mode only)
First select the source type of ATV. Then in the Channel menu, select AT V Manual Tuning and press ENTER to access. Highlight and press pq to select Storage To 1 (maybe other number), Sound System and Channel No.. Then select search and press ENTER to start the search. Press u for the unit to search towards higher frequency. Press t for the unit to search towards lower frequency. The search stops when a programme is found and this programme will be stored in the current channel position. If you want to stop the search, press MENU.
Current CH Set the channel number
Colour System Select the colour system (Available: AUTO, PAL, SECAM)
9
Page 14
Sound System Select the Sound system
Fine-Tune Adjust the frequency of the channel
Search Start the channel search
5.2.5 Channel extra settings
Programme Edit Edit the programmes. You can press the COLOUR BUTTONS on the remote
Signal Information Showing the information of current DTV channel. Only available with DTV
Cl information In the case you use an CI Module for decoding encoded channels, this menu
Logical Channel Numbering LCN
Channel Type Select FTA to search Free-To-Air channels only, or ALL to search FTA and
control to skip programmes, rename and delete programmes or move programmes, and add programmes to the favourite list by pressing FAV.
signal.
shows the internal menu of the card and/or CAM.
This function sort channels automatically to logic order in DVB-T modus if broadcaster support this function. Press ENTER to select On or O.
Encrypted channels.
NOTE: If Logical Channel Numbering function is set to ON then sorting of channels
is not possible in normally way. Logical Channel Numbering and Channel Type functions are not available when Satellite tuner is selected.

5.3 Picture menu

Picture Mode Select one of the automatic picture control mode. Available choices are
Colour Temperature Select the overall colour tone of the picture. Available choices are Cool,
Noise Reduction Eliminates noise in the picture. Available choices are O, Low, Middle, High and
5.3.1 Contrast/Brightness/Colour
If Picture Mode is set to Personal you are able to change the following settings Press pq to select an option, then press tu to adjust.
Contrast Adjust the highlight intensity of the picture, but the shadow of the picture is
Brightness Adjust the optical ber output of the entire picture, it will eect the dark
Colour Adjust the saturation of the colour based on your own preference.
Tint No function
Dynamic, Standard, Mild. Select Personal to adjust Contrast, Brightness, Colour
and Sharpness as you like.
Medium, Warm.
Default.
invariable.
region of the picture.
10
Page 15
5.3.2 Colour Temperature
In this menu you can change the overall colour cast of the picture. Press pq to select Colour Temperature, then press ENTER to enter a sub-menu. Press pq to select the
relevant picture eect (DEFAULT: Cold Normal Warm).
Cold lncrease the blue tone for the white.
Normal Increase the neutral colours for the white.
Warm lncrease the red colour for the white.
5.3.3 Noise Reduction
In this menu you can lter out and reduce the image noise and improve picture quality. Press pq to select Noise Reduction, then press ENTER to enter a sub-menu.
O Select to turn o video noise detection.
Low Detect and reduce low video noise.
Middle Detect and reduce moderate video noise.
High Detect and reduce enhanced video noise.
Default Set as Default.

5.4 Sound menu

Sound Mode Select your favourite sound mode for each input. Choices are Standard, Music,
Movie, Sports and Personal.
Treble Adjusts the higher frequency of the sound.
Bass Adjusts the lower frequency of the sound.
Balance Control the sound balance between the right and left loudspeaker
(earphone).
Auto Volume Adjust the volume corresponding to the input audio level. Options are On
and O.
S/PDIF Mode If you have connected S/PDIF output to digital home audio system. You can
select Auto to output Dolby audio automatically. If channel have this audio channel. Select PCM to output only stereo audio or OFF to switch output o.
AD Switch Turn on the Audio description, you can activate the setting of AD volume.
When turn on the audio description, a narrator will describe what is happening on the screen for blind or visually impaired viewers. (Only if available in DTV mode.)
English

5.5 Time menu

Press MENU to display the main menu. Press t u to select TIME in the main menu. Press p q to do further adjustments. Press ENTER to conrm or Press MENU to return.
Clock The time is automatically obtained from the channel transmission and doesn't
Time Zone Press p q t u to select Time Zone if you like to change to other zone. Sleep Timer Press p q to select Sleep Timer. Available Options: O, 10 min., 20 min., 30
have to be set manually.
min., 60 min., 90min., 120 min.,180 min. and 240 min..
11
Page 16
Auto Standby This function allows you to set the automatic shutdown of your TV. Choose
OSD Timer This function allows you to choose how long the channellist banner is
between 3H, 4H, 5H or O to disable this function.
displayed. Choose between 5s, 15s or 30s.

5.6 Lock

Press MENU to display the main menu. Press t u to enter the Lock menu settings. To enable enter the PIN code (default:0000). Press p q to select the options. The following options are available:
System Lock This option allows you to enable or disable the password protection. Press
Set Password The default password is 0000, to customize the password press ENTER and
Channel Lock This option allows you to prevent viewing of one or more channels. Press
Parental Guidance Press ENTER to enter and set the age for suitable programmes for children,
Key Lock This option allows you to Lock the TV buttons. Press tu to select O or On
Hotel Mode Press pq to set Hotel mode. Conrm with ENTER. It is possible to enable or
ENTER then Pin code to set this function On or O.
follow the instruction within the menu.
ENTER to display the channel list and select with pq the channel you want to be locked. Press GREEN to lock it. Consider the same procedure to lock other channels if needed.
then press pq.
to lock.
disable this function by setting On or O using tu or ENTER.
NOTE: When Hotel Mode is available, the TV react following the settings enabled
Options contained in the HOTEL MODE menu:
Hotel Mode To enable or disable this function by setting On or O using tu or ENTER.
Source Lock This option allow to enable or disable the sources available: Satellite, DTV, AT V,
Default Source Here is possible to select the source that will be displayed every time that the
Default Prog Here it is possible to select the channel that will be displayed when the TV
Default Volume This option allows to set the default volume when the TV is turned on. Press
Max Volume To set the Max volume press ENTER to display the volume bar, use tu to
12
of disabled contained in the menu
AV, PC, SCART, Component, HDMI and Media. Press ENTER to access the source list and pq to select the sources. Press ENTER to enable or disable one or more. Please note that it is necessary to keep more than 1 source un-Locked. Press MENU to back to the previous menu.
TV is turned on. Press ENTER to access the sources list, and select one of them by pressing ENTER. Press MENU to back to the previous menu.
is turned on. The program are available only when the source selected in Default Source contain channels and it is selected in view mode. Use tu to set a channel of your choice.
ENTER to display the volume bar, use tu to adjust the volume. Press MENU to back to the previous menu.
adjust the volume. Press MENU to back to the previous menu.
Page 17
Import Database Press ENTER to Import the Database from a compatible TV.
Export Database Press ENTER to Export the Database to a compatible TV.
Clear Lock Press ENTER to reset all functions set in this menu.
English
NOTE: For the Import Database and Expor t Database functions you need to connect
a USB device formatted in FAT32.

5.7 Setup Menu

Language Select the Menu language of your choice. The default setting is English. Press
TXT Languages Press pq t u to select correct character type belong to language to display
Audio Languages Press tu to select Primary for main audio track or Secondary next audio
Subtitle Language Press pq tu to select your chosen Subtitle Language, then pressENTER to
Hearing Impaired If you like to have extra subtitles support then select this function to On.
Aspect Ratio Change in this option the picture format from displayed video on the screen.
Blue Screen If you select a input with no signal and like to have Blue colour screen instead
First Time Installation This option allows you to perform the First Installation again. The complete
Reset Restore Factory Default
Software Update (USB) If a new software release for this model is available on our website and you
pq to select the menu language.
correct the TXT. Selection are: West, East, Russian, Arabic or Farsi.
channel if rst is not available. Press pq t u to select your chosen Audio Language, then press ENTER.
select.
PressENTER to select. Auto, 16:9, 4:3, Zoom 1, Zoom 2.
black. Select this function to On.
description is available on chapter 3.
Press pq to select this function, by pressing ENTER. You will reset all the settings contained in the main menu and deleted all installed channels. TV will go back to First Time Installation. See chapter 3.
have copied the unzipped le to an empty USB device, formatted in FAT32, you can upgrade the system software of this TV. After successfully update a message appears on screen. Power o by removing the main power connector. Remove USB device and power ON.
NOTE: NEVER disconnect the USB device from the TV, the TV from the main or
switch OFF power during the update procedure. It can damage your device and warranty will void!
Environment Home /Shop Switch between Home modes and Shop modes with default more brightness
and Auto standby to o.
HDMI CEC See next chapter 5.7.1.
13
Page 18
5.7.1 HDMI CEC
CEC Control Select this item and Press ENTER. Press t u to turn the HDMI CEC On or O. Audio Receiver Press t u to turn the Audio Receiver On or O. Device Auto Power O Press t u to turn on this feature. When nished turn o your T V. The
TV Auto Power On Press t u to select this option. When nished, turn on the connected device.
Device List Press OK to open the main menu of device.
Device Menu Access the device menu.
connected device will turn o automatically.
The TV will switch on automatically.

6.0 MEDIA

6.1 Reminder when using the USB player

1. Some USB storage devices may not be compatible to operate smoothly with this TV.
2. Back up all of the data in the USB storage device in case data is lost due to an unexpected accident. STRONG does not assume any liability for the losses by misuse or malfunction. Data backup is consumer's responsibility.
3. For large le sizes, the loading speed may be slightly longer.
4. The recognition speed of a USB storage device may depend on each device.
5. When connecting or disconnecting the USB storage device, make sure the TV is not in USB mode otherwise the USB storage device or the les stored in it may be damaged.
6. Please use only a USB storage device which is formatted in FAT16, FAT32, NTFS (playback only) le system provided with the Windows operating system. In case of a storage device formatted as a dierent utility programme which is not supported by Windows, it may not be recognized.
7. For Software Updates and Database functions it is recommended to use USB-Sticks (keys) in FAT16 or.32.
8. When using a USB Hard Disk Drive which is not powered independently, ensure its power does not exceed 500 mA. Otherwise the TV system will change into standby mode, and you must pull out the USB Hard Disk and restart the TV system.
9. An “Unsupported File” message will be displayed if the le format is unsupported or the le is corrupted.
10. FHD big picture needs longer time to process, which is not caused by the TV. Please be patient.
11. This TV may not support some multimedia les changed and upgraded as the change of the encoding format or other technical aspects advances.
12. Please refer to chapter 9. Appendix for a list of supported le formats for USB playback.

6.2 USB menu

Press SOURCE and select Media. You can view movie, music and photo les from your USB storage devices. Connect a USB storage device to the USB input terminal and select the types of media on the home page: Movie, Music, Photo and text. Press ENTER, the screen will show the connected USB device, press ENTER again to view the le folders and les. Press pq or tu to select a folder, press ENTER to open the folder and select the les. Highlight the one you want to play or watch or press directly u2 to start playing directly. Press 3 to stop playing and return to upper lever folder. Continuously press RETURN to go back to upper level folder. Repeat again to select and play another media type.
14
Page 19
NOTE: By choosing one of the three media types, for example Movie, the folders
inside will display only video les and no other formats.
6.2.1 Play movies
Fig.6
During playback, press INFO or ENTER to display/exit the menu bar (Fig.6). Press the USB control buttons on the remote control to do relevant operations.
Play & Pause/Stop/Prev./Next
Press u2 to play or pause the playback. Press 3 to stop playing. Press 7 8 to play the previous or the next video le. Press INFO and use tu to highlight the corresponding icon on the control bar, then press ENTER. The TV will response accordingly.
Fast Reverse/Fast Forward Press and hold 5 6 for seconds to draw the playing progress as your desire,
then press u2 to start the playing from the new position.
Play Mode Highlight the corresponding icon and pressENTER to switch to another play
mode.
Information Highlight the corresponding icon and press ENTER to view the information of
the playing video.
Aspect Ratio Highlight the button and press ENTER to select the display mode.
6.2.2 Play music
Fig.7
Press INFO or ENTER to display/exit from the menu bar (Fig.7). Press the USB control buttons on the remote control to do relevant operations.
Play & Pause/Stop/Previous/Next
Press u2 to play or pause the playback. Press 3 to stop playing. Press 7 8 to play the previous or the next music le. Press tu to highlight the corresponding icon on the control bar, and then pressENTER. The TV will response accordingly.
Fast Forward/Fast Reverse Press and hold 5 6 for seconds to draw the playing progress as you wish,
then press u2 on the remote control to start playing from the new position.
Repeat Highlight the icon and pressENTER. You can select 3 dierent modes: None to
disable the function, 1 to repeat one track only and All to repeat the entire list once it is nished.
Information Highlight the icon and press ENTER to check the information of the playing
music.
English
15
Page 20
NOTE:
If one (or more) le(s) of the play list is selected, the buttons 7 8 will
play only selected les.
This menu only shows supported les.Files with other le extensions are not displayed, even if they are saved on
the same USB storage device.
An over-modulated mp3 le may cause some sound distortion during
playback.
This TV supports lyrics display (in English). The maximum number of
characters per line is 48.
The le name of music and lyrics must be the same in order to display
lyrics while the music is playing.
If you want to show the associated lyrics on the screen with the music, you
must store these in the same folder using the same le name with “.Irc” le extensions.
6.2.3 Browse photos
Fig.8
Press during viewing INFO or ENTER to display/exit from the menu bar (Fig.8). Press the USB control buttons on the remote control to do relevant operations.
Play & Pause/Stop/Previous/Next
Repeat Highlight the icon and press ENTER. You can select 3 dierent modes: None
Info Highlight the button and press ENTER to check the information of the shown
Rotate Highlight the icon in the menu bar and press ENTER to rotate the picture 90
Zoom In/Zoom Out Highlight the icon on the menu bar and press ENTER to zoom in or zoom out
Move View When the image is magnied, use this function for convenient check.
Press u2 to play or pause the playback. Press 3 to stop playing. Press 7 8 to show the previous or the next picture. Press tu to highlight the icon on the control bar, and then pressENTER. The TV will response accordingly.
to disable the function, 1 to repeat one track only and All to repeat the entire list once it is nished.
photo.
degrees clockwise or counter clockwise.
of the image.
Highlight this icon, press ENTER, then press tupq to move the image.
NOTE: The move function
is only available when the image is enlarged.
6.2.4 Browse text documents
Press tu to select Tex t in the main menu. Then press tu to select the drive disk you choose to watch and ENTER to enter. Select the le you want to display by using pq tu and conrm with OK. Quit step by pressing ENTER. Press tu to select return and go back to previous menu.
16
Page 21
6.2.5 Software update via USB
From time to time you can check if there is an improved software version available. This can be viewed and downloaded from our website www.strong.tv. Search the model number on our website's service support section. If there is an improved software version you can download the le and copy it to the root of a USB device. Then press pq button to select Software Update (USB) from the SETUP menu on your TV. Afterwards plug your USB device into the USB slot and pressENTER to update the respective software. Conrm with Yes using tu. When the update is completed, remove the USB stick, disconnect your device from the main power supply and plug in again.

7.0 TROUBLESHOOTING

There maybe various reasons for abnormal operation of your TV set. Check your TV set according to the general procedures shown below. Additionally, we strongly recommend reading the detailed troubleshooting of your TV set in the full user manual available on our website www.strong.tv. If your TV set does not work properly after checking the general and detailed troubleshooting, please contact your dealer, the local Service Hotline, or send an email to our support via www.strong.tv. DO NOT try to open or disassemble your TV set. It may cause a dangerous situation and the warranty will be void.
Problem Possible cause and solution
The LED/Standby indicator does not light up
No Signal 1. The TV is not connected to a signal source (DVB-C, DVB-S/S2
The picture and sound remain frozen, or macro blocks or similar distortion are visible on the screen.
1. Check whether the power connector is completely plugged at the TV and into power socket.
2. Make sure that the switch on multipoint connectors is switched ON as well.
3. The electrical outlet may be damaged.
4. STBY LED is defective.
or DVB-T/T2) or the antenna (terrestrial or satellite antenna) is maybe not aligned correctly respectively the according connection and distribution equipment might show malfunction, incompatibility or defectives.
2. DVB-T/T2: Active antennas need antenna power switched ON or external power connected.
Antenna is maybe out of digital signal reception in your area. Check reference from service providers about coverage.
3. DVB-S/S2: Incorrect values of some tuner parameters (e.g. one or some channel(s) changed to another transponder or are no longer emitted).
Incorrect values of LNB parameters.
DVB-S/S2,DVB-T/T2: The reception signal is too weak or disturbed by electromagnetic, high-frequency, or other interference signals. DVB-T/ T2 : Disturbances caused by signal reections.
DVB-C, DVB-S/S2: The connection cables at the signal source are too long (too high attenuation).
DVB-T/T2, DVB-S/S2: The antenna is not properly adjusted or got misaligned after storm etc.
English
17
Page 22
Problem Possible cause and solution
Any other reception or signal related problems
No colour 1. Devices are not properly connected (scart, RCA sockets) or
No picture, normal sound 1. Adjust the brightness and contrast
Normal picture, no sound 1. Press the volume up button to increase the volume level.
Playback of video is causing picture freeze/macro blocks or similar distortion, especially on HD content.
The remote control does not work
The TV switches o after a certain time
1. Generally cables might have loosened. Moisture might have entered into cables or connectors.There is heavy rain or heavy storm at present (DVB-S/S2 and -T/T2). Check the cable connections. DVB-S/S2 and -T/T2: Check all equipment connected between the reception point and the TV.
2. Wait until heavy rain/thunderstorm passed. If no solution ask a local satellite specialist for advice.
DVB-S/S2: The satellite dish is NOT aligned to the (correct) satellite(s). Ask a local satellite specialist for advice.
3. DVB-S/S2: Satellite dish is too small. Trees or buildings are in path. Ask a local satellite specialist for advice.
4. DVB-S/S2: Signal is too strong, maybe need to be atennuated. Ask a local satellite specialist for advice.
wrong/bad cables are used.
2. Adjust the saturation.
3. Switch TV on another channel. It is possible that the current programme is broadcast in black and white.
2. Radio channel is tuned to or the programme is not transmitting Video signals or another broadcasing interference/failure.
2. Audio is muted, press ! to restore the sound.
3. If external devices are used to loop the sound through, make sure to select correct sources and correct sound mode, for details also check advices in User Manuals from connected devices
4. Maybe a channel w/o audio is tuned to (demo) or the programme is not transmitting audio signals or there is some other transmission interference/failure.
Read/write speed of your USB device could be too low. Make sure to use a USB storage device with sucient speed and space. Pen drives (USB sticks) may not support sucient speed.
1. hange the batteries. If you're using rechargable ones take care to use such with low self-discharge
2. The batteries are not installed correctly or the types have been mixed
3. IR Sensor is blocked or maybe interfered from bright light
Switch ON the TV and check settings for automatic STBY function, by default the TV switches OFF after 4 hours to full European low power regulations and help you to save energy.
NOTE: If the problem persists after these solutions, please contact your local
18
support centre or send a support mail via our website www.strong.tv.
Page 23

8.0 SPECIFICATIONS

Audio
Audio Output: 2 x 3 W
Video
Channel coverage: DVB-T2: 174 MHz-230 MHz; 470 MHz-860 MHz DVB-C: 50-858 MHz DVB-S2: 950 MHz-2150 MHz System: DTV: DVB-T2, DVB-S2, DVB-C ATV: PAL/SECAM (BG/DK/1) AV: PAL, NTSC
Connectors
1x ANT/CABLE IN 1x PC audio in 1x SAT IN 1x HDMI 1x SCART 1x USB 1x S/PDIF (coax.) 1x VGA 1x AV IN 1x COMMONINTERFACE (CI+) 1x Mini YPbPr 1x Headphones
General Data
Operating voltage: 100 ~ 240 V AC 50/60 Hz Input voltage: DC 12 V 3 A Power consumption: max. 40 W, typ. 25 W Power consumption in standby: <0.5 W Operating temperature: 25° C Storage temperature: -15 °C ~ +45 °C Operating humidity: 20% ~ 80% RH, non-condensing Storage humidity: 10% ~ 90% RH, non-condensing Dimensions (WxHxD) in mm: 550.7 x 367.3 x 161 Net-weight: 2.66 kg
English
19
Loading...