ST MICROELECTRONICS NUCLEO-WB55RG Datasheet

NUCLEO-WB55RG example. Boards
with different references show different
layouts. Picture is not contractual.

Product status link

NUCLEO-WB55RG

NUCLEO-WB15CC

NUCLEO-WB55RG NUCLEO-WB15CC

Data brief

STM32WB Nucleo-64 boards

Features

• Common features

– STM32WB55RG (1-Mbyte Flash memory, 256-Kbyte SRAM, in VFQFPN68

package) or STM32WB15CC (320-Kbyte Flash memory, 48-Kbyte SRAM,
in VFQFPN48 package) ultra‑low‑power wireless microcontroller featuring:

◦ Dual-core 32‑bit (Arm® Cortex®-M4 and dedicated M0+ CPU for real-

time radio layer)

◦ 2.4 GHz RF transceiver supporting Bluetooth® specification v5.2

– Three user LEDs

– One reset and three user push-buttons

– Board connectors:

◦

ARDUINO® Uno V3 expansion connector

◦ ST morpho extension pin headers for full access to all STM32WB I/Os

– Integrated PCB antenna and SMA connector footprint

– Flexible power-supply options: ST-LINK, USB V

– On-board footprint to mount a CR2032 battery socket

– On-board ST-LINK/V2-1 debugger/programmer with USB re-enumeration

capability: mass storage, Virtual COM port, and debug port

– Comprehensive free software libraries and examples available with the

STM32CubeWB MCU Package

– Support of a wide choice of Integrated Development Environments (IDEs)

including IAR Embedded Workbench®, MDK-ARM, STM32CubeIDE, and
Mbed Studio

• Board-specific features (STM32WB55RG only)

– USB user with Micro-B connector

– 2.4 GHz RF transceiver supporting IEEE 802.15.4-2011 PHY and MAC with

Zigbee®, Thread®, and proprietary protocols

, or external sources

BUS

Description

The NUCLEO-WB55RG and NUCLEO-WB15CC STM32WB Nucleo-64 boards are

DB4388 - Rev 1 - January 2021
For further information contact your local STMicroelectronics sales office.

Bluetooth® Low Energy (BLE) wireless and ultra-low-power devices embedding a
powerful and ultra-low-power radio compliant with the Bluetooth® Low Energy (BLE)

SIG specification v5.2.

NUCLEO-WB55RG also offers a radio compliant with IEEE 802.15.4-2011 standard
and allows the simple and quick evaluation of STM32WB55xx and STM32WB35xx
devices.

The ARDUINO® Uno V3 connectivity support and the ST morpho headers provide
an easy means of expanding the functionality of the STM32WB Nucleo open
development platform with a wide choice of specialized shields.

www.st.com

1 Ordering information

To order an STM32WB Nucleo-64 board, refer to Table 1. For a detailed description of each board, refer to
its user manual on the product web page. Additional information is available from the datasheet and reference
manual of the target STM32.

NUCLEO-WB55RG NUCLEO-WB15CC

Ordering information

Table 1. List of available products

Order code

NUCLEO-WB55RG MB1355 UM2819 STM32WB55RGV6U

NUCLEO-WB15CC MB1641 UM2823 STM32WB15CCU6U -

1.1 Product marking

The stickers located on the top or bottom side of the PCB provide product information:

• Product order code and product identification for the first sticker

• Board reference with revision, and serial number for the second sticker

On the first sticker, the first line provides the product order code, and the second line the product identification.

On the second sticker, the first identification line has the following format: “MBxxxx-Variant-yzz”, where “MBxxxx”
is the board reference, “Variant” (optional) identifies the mounting variant when several exist, "y" is the PCB
revision and "zz" is the assembly revision, for example B01.

The second identification line is the board serial number used for traceability.

Evaluation tools marked as “ES” or “E” are not yet qualified and therefore not ready to be used as reference
design or in production. Any consequences deriving from such usage will not be at ST charge. In no event, ST will
be liable for any customer usage of these engineering sample tools as reference designs or in production.

“E” or “ES” marking examples of location:

• On the targeted STM32 that is soldered on the board (For an illustration of STM32 marking, refer to the
STM32 datasheet “Package information” paragraph at the www.st.com website).

• Next to the evaluation tool ordering part number that is stuck or silk-screen printed on the board.

These boards feature a specific STM32 device version, which allows the operation of any bundled commercial
stack/library available. This STM32 device shows a "U" marking option at the end of the standard part number
and is not available for sales.

In order to use the same commercial stack in his application, a developer may need to purchase a part number
specific to this stack/library. The price of those part numbers includes the stack/library royalties.

Board

reference

User

manual

Target STM32 Differentiating feature

• USB user with Micro-B connector

• Radio compliant with
IEEE 802.15.4-2011 standard

supporting Zigbee®, Thread®, and
proprietary protocols

DB4388 - Rev 1

page 2/6