ST MICROELECTRONICS NUCLEO L496ZG Datasheet

Features

• STM32 microcontroller in LQFP144 package

• Two types of extension resources:

– ST Zio connector including: support for

Arduino
D0 to D15) and additional signals exposing
a wide range of peripherals

– ST morpho extension pin header footprints

for full access to all STM32 I/Os

• On-board ST-LINK/V2-1
debugger/programmer with SWD connector:
– Selection-mode switch to use the kit as a

standalone ST-LINK/V2-1

– USB re-enumeration capability. Three

different interfaces supported on USB:
virtual COM port, mass storage, debug port

• Flexible board power supply:
– 5 V from ST-LINK/V2-1 USB VBUS
– External power sources: 3.3 V and 7 - 12 V

on ST Zio or ST morpho connectors, 5 V on
ST morpho connector

• USB OTG or full-speed device with Micro-AB
connector (depending on STM32 support)

• Three user LEDs

• Two push-buttons: USER and RESET

• LSE crystal:

– 32.768 kHz crystal oscillator

• Comprehensive free software HAL library
including a variety of software examples

• Support of wide choice of Integrated
Development Environments (IDEs) including

™

IAR

™

Uno V3 connectivity (A0 to A5,

, Keil®, GCC-based IDEs.

Description

The STM32 Nucleo-144 board (NUCLEO­L496ZG) provides an affordable and flexible way
for users to try out new concepts and build
prototypes with the STM32 microcontroller,
choosing from the various combinations of
performance, power consumption and features.

NUCLEO-L496ZG

STM32 Nucleo-144 board

Data brief

1. Picture is not contractual.

The ST Zio connector, which extends the
Arduino
morpho headers provide an easy means of
expanding the functionality of the Nucleo open
development platform with a wide choice of
specialized shields. The STM32 Nucleo-144
board does not require any separate probe as it
integrates the ST-LINK/V2-1
debugger/programmer. The STM32 Nucleo-144
board comes with the STM32 comprehensive
software HAL library and various packaged
software examples.

™

Uno V3 connectivity, and the ST

February 2017 DocID030212 Rev 1 1/5

For further information contact your local STMicroelectronics sales office.

www.st.com

System requirements NUCLEO-L496ZG

System requirements

• Windows® OS (XP, 7, 8, 10), Linux or MacOS

• USB Type-A to Micro-B cable

Development toolchains

• Keil® MDK-ARM

• IAR™ EWARM

• GCC-based IDEs including free SW4STM32 from AC6

(a)

(a)

Demonstration software

Demonstration software is preloaded in the board-mounted Flash memory for easy
demonstration of the device peripherals in standalone mode. For more information and to
download the latest version, refer to the demonstration software for the STM32 Nucleo
boards at the www.st.com/stm32nucleo website.

™

Ordering information

To order the Nucleo-144 board corresponding to the targeted STM32, use the order code
given below in Ta b l e 1 .

Order code Target STM32

NUCLEO-L496ZG STM32L496ZGT6

a. On Windows® only.

Table 1. Ordering information

2/5 DocID030212 Rev 1