– Arduino™ Uno V3
– ST morpho extension pin headers for full
access to all STM32 I/Os
– External SMPS experimentation dedicated
connector (only available on '-P' suffixed
boards)
• Flexible power-supply options: ST-LINK USB
V
or external sources
BUS
• On-board ST-LINK/V2-1
debugger/programmer with USB reenumeration capability. Three different
interfaces supported on USB: mass storage,
Virtual COM port and debug port
• Comprehensive free software libraries and
examples available with the STM32Cube MCU
Package
• Support of a wide choice of Integrated
Development Environments (IDEs) including
Top view of a NUCLEO-XXXRX board.Top view of a NUCLEO-XXXXRX-P board
with SMPS.
Pictures are not contractual.
October 2018DB2196 Rev 121/7
For further information contact your local STMicroelectronics sales office.
Top view of a NUCLEO-GXXXRX board.
www.st.com
Page 2
DescriptionNUCLEO-XXXXRX NUCLEO-XXXXRX-P
Description
The STM32 Nucleo-64 boards provide an affordable and flexible way for users to try out
new concepts and build prototypes with the STM32 microcontrollers, choosing from various
combinations of performance, power consumption and features. For the compatible boards,
the SMPS significantly reduces power consumption in Run mode.
The Arduino™
Uno V3 connectivity support and the ST morpho headers allow the easy
expansion of the functionality of the STM32 Nucleo open development platform with a wide
choice of specialized shields.
The STM32 Nucleo-64 board does not require any separate probe as it integrates the
ST-LINK/V2-1 debugger and programmer.
The STM32 Nucleo-64 board comes with the STM32 comprehensive software HAL library
together with various packaged software examples, as well as direct access to the Arm
Mbed™ online resources at http://mbed.org.
System requirement
•Windows® OS (7, 8 and 10), Linux® 64-bit or macOS
•USB Type-A to Mini-B cable or USB Type-A to Micro-B cable
Development toolchains
(b)
(c)
online
(b)
•Keil®: MDK-ARM
•IAR™: EWARM
•GCC-based IDEs
•Arm
®
Mbed™
(d)
(see http://mbed.org)
®(a)
®
a. macOS® is a trademark of Apple Inc.\nregistered in the U.S. and other countries.
b. On Windows® only.
c. Arm and Mbed are registered trademarks or trademarks of Arm Limited (or its subsidiaries) in the US and or
elsewhere.
d. Refer to the https://www.mbed.com website and to Table 2: Ordering information, to determine which
The demonstration software, included in the STM32Cube MCU Package, is preloaded in the
STM32 Flash memory for easy demonstration of the device peripherals in standalone mode.
The latest versions of the demonstration source code and associated documentation can be
downloaded from the www.st.com/stm32nucleo website.
Ordering information
To order the STM32 Nucleo-64 board, refer to Table 2.
Order codeTargeted STM32
NUCLEO-F030R8
NUCLEO-F070RB
NUCLEO-F072RB
NUCLEO-F091RC
NUCLEO-F103RB
NUCLEO-F302R8
NUCLEO-F303RE
NUCLEO-F334R8
NUCLEO-F401RE
NUCLEO-F410RB
NUCLEO-F411RE
NUCLEO-F446RE
NUCLEO-G070RBSTM32G070RBT6
NUCLEO-G071RBSTM32G071RBT6
Table 2. Ordering information
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
STM32F030R8T6
STM32F070RBT6
STM32F072RBT6
STM32F091RCT6
STM32F103RBT6
STM32F302R8T6
STM32F303RET6
STM32F334R8T6
STM32F401RET6
STM32F410RBT6
STM32F411RET6
STM32F446RET6
NUCLEO-L010RBSTM32L010RBT6
NUCLEO-L053R8
NUCLEO-L073RZ
NUCLEO-L152RE
NUCLEO-L412RB-PSTM32L412RBT6P
NUCLEO-L433RC-P
NUCLEO-L452RESTM32L452RET6
NUCLEO-L452RE-PSTM32L452RET6P
NUCLEO-L476RG
1. Arm® Mbed Enabled™.
(1)
(1)
(1)
(1)
(1)
STM32L053R8T6
STM32L073RZT6
STM32L152RET6
STM32L433RCT6P
STM32L476RGT6
DB2196 Rev 123/7
7
Page 4
Ordering informationNUCLEO-XXXXRX NUCLEO-XXXXRX-P
The meaning of the codification is explained in Tabl e 3.
NUCLEO-TXXXRY-PDescriptionExample: NUCLEO-L452RE
Table 3. Codification explanation
TXXX
STM32 product line
STM32L452
RSTM32 package pin count64 pins
STM32 Flash memory size:
– 8 for 64 Kbytes
– B for 128 Kbytes
Y
– C for 256 Kbytes
512 Kbytes
– E for 512 Kbytes
– G for 1 Mbyte
– Z for 192 Kbytes
P = SMPSMCU has SMPS function-
The order code is printed on a sticker placed at the top or bottom side of the board.
4/7DB2196 Rev 12
Page 5
NUCLEO-XXXXRX NUCLEO-XXXXRX-PRevision history
Revision history
Table 4. Document revision history
DateRevisionChanges
10-Feb-20141Initial release.
13-Feb-20142
Added Table 1: Device summary and updated Tab le 2 :
Ordering information.
Extended the applicability to NUCLEO-F302R8.
11-Apr-20143
Updated Table 1: Device summary and Table 2:
Ordering information.
Extended the applicability to NUCLEO-L053R8,
26-May-20144
NUCLEO-F072RB, NUCLEO-F334R8 and
NUCLEO-F411RE
Updated Tab le 1 and Tab le 2 .
Extended the applicability to NUCLEO-F091RC and
NUCLEO-F303RE.
09-Sep-20145
Updated Features.
Updated Table 1: Device summary and Table 2:
Ordering information.
Extended the applicability to NUCLEO-F070RB,
16-Dec-20146
NUCLEO-L073RZ and NUCLEO-L476RG.
Updated Table 1: Device summary and Table 2:
Ordering information.
Extended the applicability to NUCLEO-F410RB,
08-Jul-20157
NUCLEO-F446RE.
Updated Table 1: Device summary and Table 2:
Ordering information.
Extended the applicability to NUCLEO-L452RE.
29-Nov-20168
Updated Table 1: Device summary and Table 2:
Ordering information.
Added Table 3: Codification explanation.
Extended document scope to the NUCLEO-L452RE-P
and NUCLEO-L433RC-P boards:
Extended document scope to the NUCLEO-L010RB
board: updated Table 1: Device summary and Tabl e 2:
Ordering information.
DB2196 Rev 125/7
7
Page 6
Revision historyNUCLEO-XXXXRX NUCLEO-XXXXRX-P
Table 4. Document revision history (continued)
DateRevisionChanges
Extended document scope to the NUCLEO-L412RB-P
24-Aug-201811
22-Oct-201812
board: updated Table 1: Device summary and Tabl e 2:
Ordering information.
Extended document scope to the NUCLEO-G070RB
and NUCLEO-G071RB boards:
– updated Table 1: Device summary and Tab le 2:
Ordering information
– added NUCLEO-GXXXRX top view on the cover page
6/7DB2196 Rev 12
Page 7
NUCLEO-XXXXRX NUCLEO-XXXXRX-P
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and
improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on
ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order
acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or
the design of Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.