Stirling XQB60-M933 User Manual [nl]

5 (1)
Model Number XQB60-M933
N13275
5.5kg Top Load Washing Machine
INSTRUCTION MANUAL
AFTER SALES SUPPORT
1300 886 649
info@tempo.org
AUS
2
AFTER SALES SUPPORT
1300 886 649
info@tempo.org
AUS
Welcome
Congratulations on choosing to buy a STIRLING
®
product.
All products brought to you by STIRLING
®
are manufactured to the highest standards
of performance and safety and, as part of our philosophy of customer service and
satisfaction, are backed by our comprehensive 3 Year Warranty. We hope you will
enjoy using your purchase for many years to come.
3
AFTER SALES SUPPORT
1300 886 649
info@tempo.org
AUS
MODEL: XQB60-M933 PRODUCT CODE: 54730 11/2016
Contents
02 Welcome
04 Warranty Details
05 General Safety Instructions
09 Product Overview
10 Getting Started: Installation
14 Features
16 Instructions
23 FAQs and Troubleshooting
25 Other Useful Information
31 Repair and Refurbished Goods or Parts Notice
4
AFTER SALES SUPPORT
1300 886 649
info@tempo.org
AUS
5.5kg Top Load Washing Machine
Warranty Details
The product is guaranteed to be free from defects in workmanship and parts for
a period of 36 months from the date of purchase. Defects that occur within this
warranty period, under normal use and care, will be repaired, replaced or refunded
at our discretion, solely at our option with no charge for parts and labour. The
benefits conferred by this warranty are in addition to all rights and remedies
in respect of the product that the consumer has under the Competition and
Consumer Act 2010 and similar state and territory laws.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and to compensation for any other reasonably foreseeable loss or damage. You
are also entitled to have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major failure.
YEAR IN HOME
WARRANTY
3
5
AFTER SALES SUPPORT
1300 886 649
info@tempo.org
AUS
MODEL: XQB60-M933 PRODUCT CODE: 54730 11/2016
General Safety Instructions
This heading indicates that there is a serious risk of
injury if you do not adhere to the warning(s).
This heading indicates that care should be taken to
avoid injury to persons or damage to property.
A tick in a circle accompanies a measure or action that
you should do or follow.
A cross in a circle accompanies a measure or action
that you should NOT do.
Warning
Caution
IMPORTANT SAFETY INSTRUCTIONS
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
Read this manual thoroughly before first use, even if you are familiar with this type
of product. The safety precautions enclosed herein reduce the risk of fire, electric
shock and injury when correctly adhered to.
Keep the manual in a safe place for future reference, along with the completed
warranty card and purchase receipt. If applicable, pass these instructions on to the
next owner of the appliance.
Always follow basic safety precautions and accident prevention measures when
using an electrical appliance, including the following:
Electrical safety
Before connecting and turning on the washing machine, ensure the electrical
voltage and circuit frequency correspond to those indicated on the appliance.
Only connect the washing machine to a grounded (earthed) electrical outlet.
Do not insert any objects into the appliance.
Do not kink or damage the power cord, and position it out of the way so no one
steps on or places anything on the cord or against it.
Do not overload the wall outlet. Overloading can result in fire or electric shock.
If the supply cord is damaged, it must be replaced by the manufacturer or its service
agent or a similarly qualified person in order to avoid a hazard.
Never use this washing machine with a power adaptor or an extension cord.
Unplug the washing machine from the power supply before cleaning, servicing,
maintenance or moving the appliance. Pull by the plug, not by the cord.
After use, always unplug the appliance and turn off the water.
6
AFTER SALES SUPPORT
1300 886 649
info@tempo.org
AUS
General Safety Instructions (Cont.)
Installation
Install the washing machine on a flat surface to avoid overturning during use.
If the machine must be placed on carpet, make sure the ventilation openings in the
base are not obstructed.
Connect the washing machine to the water mains using new hose sets. Do not
reuse old hose sets.
Make sure that all water and electrical connections are made by qualified personnel
only, observing local safety regulations and following the manufacturer’s instructions
(see “Getting Started: Installation” on pages 10 to 13).
Improper installation may result in the risk of fire, electric shock and/or injury.
We assume no liability for any eventual damages caused by improper installation.
Usage conditions and restrictions
The appliance is designed for private domestic use only.
Do not operate the appliance outdoors.
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Young children should be supervised to ensure they do not play with the appliance.
Before loading the washing machine, always ensure no pet or young child has
climbed into it.
Make sure all pockets of clothing to be washed are empty. Hard, sharp objects
such as coins, safety pins, bra wires, nails, screws or stones can cause extensive
damage to the appliance and block the pump.
Any damage or malfunction resulting from foreign objects is not covered by your
warranty and may lead to expensive repairs.
We assume no liability for any eventual damages caused by improper or faulty use.
Cleaning and maintenance
Before cleaning or carrying out maintenance, always unplug the appliance from the
power supply.
Except for the filters that require regular cleaning, the unit has no user-serviceable
parts contained within. Do not attempt to repair, disassemble or modify it. Repairs
made by inexperienced or unqualified persons may cause injury and/or make more
serious repairs to the appliance necessary.
CAUTION: After each wash, check and clean the lint filter inside the drum. Also
check and clean the lint filter at the back of the machine next to the drain hose
outlet on a regular basis.
This appliance should only be serviced by an authorised service centre, and only
genuine spare parts should be used. Contact the after sales support line for advice.
7
AFTER SALES SUPPORT
1300 886 649
info@tempo.org
AUS
MODEL: XQB60-M933 PRODUCT CODE: 54730 11/2016
General Safety Instructions (Cont.)
Do not let children climb into the
washing machine or peer into the
rotating spin barrel.
Do not wash clothes that
have residue of flammable
materials.
Do not use the appliance if the
power cord or plug is damaged
to avoid an electric shock, short
circuit or fire.
Regularly clean the power plug
to remove dust and dirt and
avoid contact failure.
Turn the machine off before
pulling out the plug from the
socket if the machine
is not in use.
Do not place any flammable
items on top of the washing
machine.
Insert the power plug securely.
Warnings
Use a 230-240V AC power
source.
230-240V
8
AFTER SALES SUPPORT
1300 886 649
info@tempo.org
AUS
Ensure the water inlet hoses
are connected and the taps are
turned on before washing a load.
Do not change the power cord.
If it needs changing, contact a
qualified electrician
or call the after
sales support line.
Do not pull the power cord when
removing the plug.
Do not wash jackets, raincoats,
fishing coats and similar clothes
in the washing
machine.
Do not allow children to lay or sit
on top of the washing machine.
The water temperature should
not exceed 60°C
when washing
with warm water.
Cautions
Do not pull out or insert the plug
with wet hands to avoid electric
shock.
No wet hands
To avoid electric shock, fire and
malfunction, do not install this
machine
in a damp
place.
No dampness
General Safety Instructions (Cont.)
9
AFTER SALES SUPPORT
1300 886 649
info@tempo.org
AUS
MODEL: XQB60-M933 PRODUCT CODE: 54730 11/2016
Product Overview
B Accessories included
Scope of delivery
A Parts list
1 Lid
2 Control panel
3 Housing
4 Detergent box
5 Wash/spin tub
6 Softener dispenser
7 Lint filter
8 Pulsator
9 Adjustable leg (1)
10 Water supply hose connections
11 Hose clip
12 Drain hose connection
13 Drain pump filter
16
1514
14 Hot water supply hose
15 Cold water supply hose
16 Drain hose with elbow
Bottom cover and screw for attaching the
bottom cover to the unit (not shown)
C Documentation (not shown)
Instruction manual, Quick start guide,
Warranty certificate
11
10
12
Back view
Front view
1
3
9
2
7
8
Inside view
4
6
Top view
5
13
10
AFTER SALES SUPPORT
1300 886 649
info@tempo.org
AUS
Getting Started: Installation
Unpacking
This product has been packaged to protect it against transportation damage. Keep
the original packaging carton and materials in a safe place. It will help prevent any
damage if the product needs to be transported in the future. In the event it is to be
disposed of, please recycle all packaging materials where possible.
Plastic wrapping can be a suffocation hazard for babies and young children, so
ensure all packaging materials are out of their reach and disposed of safely.
Unwind the power cord to its full length and inspect it for damage. Do not use
the appliance if the appliance or its cord have been damaged or are not working
properly. In case of damage, contact our after sales support line for advice on
examination, repair or return of the damaged product.
Read this manual to familiarise yourself with all the parts and operating principles
of the washing machine. Pay particular attention to the safety instructions on the
previous pages.
Installing the bottom cover
Levelling the washer
Install the washer on a stable and level
surface, in a dry location, out of sunlight.
If levelling is necessary, adjust the
adjustable leg (at the front right side of the
machine), as illustrated, right.
The maximum permissible inclination
of the supporting surface is 2 degrees.
CAUTION: If you must install the washer on
a carpeted floor, make sure not to block the
ventilation openings on the bottom of the washer.
Make sure the power cord is unplugged from the
mains supply.
Place some padding (such as a soft mat, blanket or
thick towel) on the floor and gently lay the washing
machine on the padding, back side down. Take care
not to dent the housing.
Insert the bottom cover into the hooks of the leg,
pushing it straight until it reaches into the front hooks.
Fasten the bottom cover with the supplied screw.
Carefully set the washer upright.
Bottom
Cover
Back
Leg
Screw
Front
Base of the Washer
(3) Tighten
(1) Loosen
(2) Down (4) Up
Adjustable Leg
Loading...
+ 22 hidden pages