Page 1
5T/HL
STI H L TS 510, 760 Cutq u i k°
Instruction Manual
Manual de instrucciones
Warning!
For safe operation follow all safety
precautions in Instruction Manual - improper
use can cause serious injury. To reduce the
risk of personal injury use proper cutting
attachments.
Advertencia!
Para su seguridad durante el manejo de este
producto, siga siempre las precauciones de
seguridad dadas an el manual de
instrucciones - el use indebido puede causer
lesiones graves. Para reducir el riesgo de
lesiones personales, utilice los accesorios de
corte adecuados.
zc'
Page 2
English / USA
Contents
Guide to Using this Manual
..............
2
Safety Precautions
...........................
3
Assembling the bearing
and guard
.......................................
18
Tensioning the V-belt ......................
19
W'
Abrasive wheels
.............................
20
Fitting / replacing an
00
abrasive wheel
...............................
21
Fuel................................................
22
Fueling............................................
23
Starting / stopping the engine .........
24
Operating Instructions
....................
27
Cleaning the air filter ......................
27
Motor Management
........................
29
a
Adjusting Carburetor
......................
29
Spark arresting screen*
in the muffler ...................................
30
Checking the Spark Plug ................
30
Replacing the starter rope
n
and rewind spring
31
( m
Replacing the V-belt
.......................
33
STIHL cut-off machine cart* ...........
34
(~
L
$
Storing the machine ........................
35
Maintenance chart ..........................
36
Main parts of the machine
..............
37
m w
Specifications
39
aa`
Maintenance and Repairs ...............
40
STIHL Incorporated
Federal Emission Control
Warranty Statement ........................
41
m
N
9
* see "Guide to Using this Manual"
aw
J N
C4
W
m
M
®0
5T/HL®
TS 510, TS 760
Allow only persons who understand this
Manual to operate your cut-off machine.
To receive maximum performance and
satisfaction from your STIHL cut-off
machine, it is important that you read
and understand the maintenance and
safety precautions, starting on page 3,
before using your cut-off machine.
Contact your STIHL dealer or the STIHL
distributor for your area if you do not
understand any of the instructions in this
Manual.
L Warning
Because a cut-off machine is a highspeed cutting tool, some special safety
precautions must be observed as with
any other cut-off machine to reduce the
risk of personal injury.
Careless or improper use may cause
serious or even fatal injury.
STIHL's philosophy is to continually
improve all of its products. As a result,
engineering changes and improvements
are made from time-to-time. If the
operating characteristics or the
appearance of your cut-off machine
differs from those described in this
Manual, please contact your STIHL
dealer for information and assistance.
Page 3
English / USA
Guide to Using this Manual
Pictograms
All the pictograms attached to the
machine are shown and explained in
this manual.
The operating and handling instructions
are supported by illustrations.
Symbols in text
The individual steps or procedures
described in the manual may be marked
in different ways:
•
A bullet marks a step or procedure
without direct reference to an
illustration.
A description of a step or procedure that
refers directly to an illustration may
contain item numbers that appear in the
illustration.
Example:
Loosen the screw (1)
Lever (2) ...
In addition to the operating instructions,
this manual may contain paragraphs
that require your special attention. Such
paragraphs are marked with the
symbols described below:
Q
Warning where there is a risk of an
accident or personal injury or
serious damage to property.
Caution where there is a risk of
damaging the machine or its
individual components.
Q
Note or hint which is not essential
for using the machine, but may
improve the operator's understanding of the situation and result
in better use of the machine.
Note or hint on correct procedure in
order to avoid damage to the
environment.
*
Equipment and features
This instruction manual may refer to
several models with different
features. Components that are not
installed on all models and related
applications are marked with an
asterisk (*). Such components may
be available as special accessories
from your STIHL dealer.
Engineering improvements
STIHL's philosophy is to continually
improve all of its products. As a result,
engineering changes and improvements
are made from time to time. If the
operating characteristics or the
appearance of your machine differ from
those described in this manual, please
contact your STIHL dealer for
assistance.
Therefore some changes, modifications
and improvements may not be covered
in this manual.
TS 510, TS 760
Page 4
English / USA
Safety Precautions
The use of any cut-off
machine may be
hazardous. Because a
•
cut-off machine is a highspeed, fast-cutting power
tool, special safety
precautions must be observed to reduce
the risk of personal injury and fire.
It is important that you read, fully
understand and observe the following
safety precautions and warnings.
Read the Owners Manual
and the safety instructions
periodically.
Do not lend or rent your cut-off machine
without the Owners Manual. Be sure
that anyone using your cut-off machine
understands the information contained
in this manual. Employers should
establish a training program for
operators of gasoline-powered, handheld portable, cut-off machines to
assure safe operation of these
machines. These safety precautions
and warnings apply to the use of all
STIHL Cutquiks.
Careless or improper use of any cut-off
machine may cause serious or fatal
injury.
Have your STIHL dealer show you how
to operate your cut-off machine.
Observe all applicable local safety
regulations, standards and ordinances.
L
I Warning)
Minors should never be allowed to use a
cut-off machine. Bystanders, especially
children, and animals should not be
allowed in the area where a cut-off
machine is in use. Never let the cut-off
machine run unattended.
Different models may have different
parts and controls. See the appropriate
section of your owners manual for a
description of the controls and function
of the parts of your model cut-off
machine.
Safe use of a cut-off machine involves
— the operator
— the cut-off machine
— the use of the cut-off machine.
THE OPERATOR
Physical Condition
You must be in good physical condition
and mental health and not under the
influence of any substance (drugs,
alcohol, etc.) which might impair vision,
dexterity or judgment. Do not operate a
cut-off machine when you are fatigued.
Be alert - if you get tired while operating
your cut-off machine, take a break;
tiredness may result in loss of control.
Working with any cut-off machine can be
strenuous. If you have any condition that
might be aggravated by strenuous work,
check with your doctor before operating
a cut-off machine.
TS 510, TS 760
Page 5
English / USA
L
Warningl
Prolonged use of cut-off machines (or
other machines) exposing the operator
to vibrations may produce whitefinger
disease (Raynaud's phenomenon) or
carpal tunnel syndrome. These
conditions reduce the hand's ability to
feel and regulate temperature, produce
numbness and burning sensations and
cause nerve and circulation damage and
tissue necrosis. All factors which
contribute to whitefinger disease are not
known, but cold weather, smoking and
diseases or physical conditions that
affect blood vessels and blood transport,
as well as high vibration levels and long
periods of exposure to vibration are
mentioned as factors in the development
of whitefinger disease. In order to
reduce the risk of whitefinger disease
and carpal tunnel syndrome, please
note the following:
— Most STIHL cut-off machine models
are available with an anti-vibration
("AV") system designed to reduce
the transmission of vibrations
created by the engine to the
operators hands. An AV system is
recommended for those persons
using cut-off machines on a regular
or sustained basis.
— Wear gloves and keep your hands
warm.
— Keep the AV system well
maintained. A cut-off machine with
loose components or with damaged
or worn AV buffers will tend to have
higher vibration levels.
— Maintain a firm grip at all times, but
do not squeeze the handles with
constant, excessive pressure. Take
frequent breaks.
All the above-mentioned precautions do
not guarantee that you will not sustain
whitefinger disease or carpal tunnel
syndrome. Therefore, continual and
regular users should monitor closely the
condition of their hands and fingers. If
any of the above symptoms appear,
seek medical advice immediately.
LI Warning
The ignition system of your unit
produces an electromagnetic field of a
very low intensity. This field may
interfere with some pacemakers. To
reduce the risk of serious or fatal injury,
persons with a pacemaker should
consult their physician and the
pacemaker manufacturer before
operating this tool.
Proper Clothing
L
I Warningl
0
To reduce the risk of
(1~,)
injury, the operator should
wear proper protective
apparel.
Clothing must be sturdy and snug-fitting,
but allow complete freedom of
movement. Avoid loose-fitting jackets,
scarfs, neckties, jewelry, flared or cuffed
pants, unconfined long hair or anything
that could become caught on any
obstacles or moving parts of the unit.
Wear overalls or long pants to protect
your legs. Do not wear shorts.
4
TS510,TS760
Loading...