This instruction manual is protected by copyright. All rights reserved, especially the rights to reproduce, translate and process
with electronic systems.
1
English
1 Introduction
18 Troubleshooting
18.1 Troubleshooting Hedge Trimmer and Battery
19 Specifications
19.1 STIHL HLA 135, HLA 135 K long-reach hedge
trimmer
19.2 Cutting blades
19.3 STIHL AP battery
19.4 Sound Values and Vibration Values
19.5 REACH
20 Combinations of Carrying Systems
20.1 Combinations of Carrying Systems
21 Spare Parts and Accessories
21.1 Spare parts and accessories
22 Disposal
22.1 Disposing of the Hedge Trimmer and Battery
23 EC Declaration of Conformity
23.1 STIHL HLA 135, HLA 135 K long-reach hedge
trimmer
24 UKCA Declaration of Conformity
24.1 STIHL HLA 135, HLA 135 K long-reach hedge
trimmer
25 General Power Tool Safety Warnings
25.1 Introduction
25.2 Work area safety
25.3 Electrical safety
25.4 Personal safety
25.5 Power tool use and care
25.6 Battery tool use and care
25.7 Service
25.8 Hedge trimmer safety warnings
25.9 Additional safety instructions for extended-reach
hedge trimmers
manufacture our quality products to meet our customers’
26
requirements. The products are designed for reliability even
26
under extreme conditions.
26
STIHL also stands for premium service quality. Our dealers
27
guarantee competent advice and instruction as well as
28
comprehensive service support.
28
STIHL expressly commit themselves to a sustainable and
28
responsible handling of natural resources. This user manual
28
is intended to help you use your STIHL product safely and in
an environmentally friendly manner over a long service life.
28
28
We thank you for your confidence in us and hope you will
enjoy working with your STIHL product.
28
28
29
29
Dr. Nikolas Stihl
30
30
30
IMPORTANT! READ BEFORE USING AND KEEP IN A
30
SAFE PLACE FOR REFERENCE.
30
31
31
2Guide to Using this Manual
32
32
2.1Applicable Documents
33
The local safety regulations apply.
► In addition to this User Manual, read, understand and
keep the following documents:
– User manual of the carrying system you are using
– User Manual for STIHL AR battery
– User Manual for "AP belt bag with connecting cable"
2
0458-683-0121-B
3 Overview
English
– Safety notices and precautions for STIHL AP battery
– User manual for STIHL AL 101, 300, 500 chargers
– Safety information for STIHL batteries and products
with built-in battery: www.stihl.com/safety-data-sheets
2.2Warning Notices in Text
DANGER
This notice refers to risks which result in serious or fatal
injury.
► Serious or fatal injuries can be avoided by taking the
precautions mentioned.
WARNING
This notice refers to risks which can result in serious or fatal
injury.
► Serious or fatal injuries can be avoided by taking the
precautions mentioned.
NOTICE
This notice refers to risks which can result in damage to
property.
► Damage to property can be avoided by taking the
precautions mentioned.
2.3Symbols in Text
This symbol refers to a chapter in this instruction
manual.
3Overview
3.1STIHL HLA 135 long-reach hedge trimmer and
battery
20
19
21
6
#
1
2
#
10
9
3
11
12
13
17
18
16
1 Shaft
The shaft connects all components.
2 Loop handle
For holding and controlling the long-reach hedge
trimmer.
3 Handle hose
For holding and controlling the long-reach hedge
trimmer.
14
7
8
6
4
5
15
0000097309_002
0458-683-0121-B
3
English
3 Overview
4 Cutting blades
The cutting blades cut the hedge.
5 Blade scabbard
The blade scabbard protects against contact with the
cutting blades.
6Screw plug
The screw plug closes the filler opening for STIHL gear
grease.
7 Swivel handle
Serves to adjust angle of cutting blades.
8 Sliding sleeve
Unlocks the blade angle adjuster.
9 Locking lever
The locking lever holds the battery in the battery
compartment.
10 Battery compartment
The battery compartment holds the battery.
11 Cover
1
The cover is the placeholder for a Smart Connector 2 A.
12 Trigger lockout
The trigger lockout unlocks the trigger.
13 Release slide
The release slide is used to switch on the long-reach
hedge trimmer.
14 LED
The LEDs indicate the selected power level.
15 Carrying ring
For attaching the carrying system to the brushcutter.
16 Trigger
Switches the long-reach hedge trimmer on and off.
17 Control handle
For operating, holding and controlling the long-reach
hedge trimmer.
18 Air filter
The air filter filters the air entering the engine.
19 LEDs
The LEDs indicate the state of charge of the battery and
any faults.
20 Battery
Supplies power to the long-reach hedge trimmer.
21 Button
The button activates the LEDs on the battery.
# Rating plate with machine number
1
The cover is part of the motor housing. The cover should only be
removed to install a Smart Connector 2 A, and it should be safely
stored for later re-installation. Always use the long-reach hedge
trimmer with the cover or Smart Connector 2 A installed.
4
0458-683-0121-B
3 Overview
English
3.2STIHL HLA 135 K long-reach hedge trimmer
and battery
19
6
18
20
5
#
1
5
#
9
8
2
3
10
11
12
13
4
14
16
17
15
1Shaft
The shaft connects all components.
2 Handle hose
For holding and controlling the long-reach hedge
trimmer.
3 Cutting blades
The cutting blades cut the hedge.
4 Blade scabbard
The blade scabbard protects against contact with the
cutting blades.
5Screw plug
6 Swivel handle
7 Sliding sleeve
7
8 Locking lever
9 Battery compartment
10 Cover
11 Trigger lockout
12 Release slide
13 LED
14 Carrying ring
0000097310_002
15 Trigger
16 Control handle
17 Air filter
1
The screw plug closes the filler opening for STIHL gear
grease.
Serves to adjust angle of cutting blades.
Unlocks the blade angle adjuster.
The locking lever holds the battery in the battery
compartment.
The battery compartment holds the battery.
1
The cover is the placeholder for a Smart Connector 2 A.
The trigger lockout unlocks the trigger.
The release slide is used to switch on the long-reach
hedge trimmer.
The LEDs indicate the selected power level.
For attaching the carrying system to the brushcutter.
Switches the long-reach hedge trimmer on and off.
For operating, holding and controlling the long-reach
hedge trimmer.
The air filter filters the air entering the engine.
The cover is part of the motor housing. The cover should only be
removed to install a Smart Connector 2 A, and it should be safely
stored for later re-installation. Always use the long-reach hedge
trimmer with the cover or Smart Connector 2 A installed.
0458-683-0121-B
5
English
A
4 Safety Precautions
18 LEDs
The LEDs indicate the state of charge of the battery and
any faults.
19 Battery
Supplies power to the long-reach hedge trimmer.
20 Button
The button activates the LEDs on the battery.
# Rating plate with machine number
3.3Icons
The symbols, which may be on the long-reach hedge
trimmer and battery, have the following meaning:
The clamp nut is unscrewed in this position. The shaft
can be extended.
The clamp nut is locked in this position. The shaft
cannot be extended.
This icon marks the release slide.
1 LED lights up red. The battery is too warm or
too cold.
Do not dispose of the product with domestic waste.
4Safety Precautions
4.1Warning Symbols
Meanings of warning signs and labels on the long-reach
hedge trimmer or battery:
Observe safety notices and take the necessary
precautions.
Read, understand and keep the User Manual.
Wear safety glasses and a hard hat.
Wear safety boots.
4 LEDs flashing red. There is a fault in the
battery.
Guaranteed sound power level in accordance
L
W
with Directive 2000/14/EC in dB(A) for the
purpose of comparing the sound emissions of
products.
The information next to the symbol indicates the
energy content of the battery according to the cell
manufacturer’s specification. The energy content
available in operation is lower.
6
Wear work gloves.
Do not touch moving cutting blades.
0458-683-0121-B
4 Safety Precautions
English
Maintain a safety distance.
Remove the battery during work stoppages,
transport, storage, maintenance or repair.
Protect battery from heat and fire.
Do not immerse battery in fluids.
Observe the permitted battery temperature
range.
Do not touch hot surface.
WARNING
■ Batteries not explicitly approved for the long-reach hedge
trimmer by STIHL may cause fire or explosion. Persons
may be seriously or fatally injured and property may be
damaged.
► Use the long-reach hedge trimmer with a STIHL AP
battery or a STIHL AR battery.
■ Using the long-reach hedge trimmer or the battery for
purposes for which they were not designed may result in
serious or fatal injuries and damage to property.
► Use the long-reach hedge trimmer as described in this
User Manual.
► Always use the battery as described in this User Manual
or in the User Manual for the STIHL AR battery.
4.3The Operator
WARNING
■ Users without adequate training or instruction cannot
recognize or assess the risks involved in using the hedge
trimmer and battery. The user or other persons may
sustain serious or fatal injuries.
► Read, understand and save the instruction
manual.
4.2Intended Use
The STIHL HLA 135 long-reach hedge trimmer is used to cut
low growing shrubs, tall hedges, tall shrubs, tall bushes and
tall thickets.
The STIHL HLA 135 K long-reach hedge trimmer is used to
cut low growing shrubs, tall hedges, tall shrubs, tall bushes
and tall thickets.
The long-reach hedge trimmer may be used in the rain.
the long-reach hedge trimmer is powered by a STIHL AP
battery or a STIHL AR battery.
0458-683-0121-B
► If the hedge trimmer or battery is passed on to another
person: Always give them the instruction manual.
► Make sure the user meets the following requirements:
– The user must be rested.
– The user must be in good physical condition and
mental health to operate and work with the hedge
trimmer and battery. If the user’s physical, sensory or
7
English
4 Safety Precautions
mental ability is restricted, he or she may work only
under the supervision of or as instructed by a
responsible person.
– The user is able to recognize and assess the risks
involved in using the hedge trimmer and battery.
– The user must be of legal age or is being trained in a
trade under supervision in accordance with national
rules and regulations.
– The user has received instruction from a STIHL
servicing dealer or other experienced user before
working with the hedge trimmer for the first time.
– The user must not be under the influence of alcohol,
medication or drugs.
► If you have any queries: Contact a STIHL servicing
dealer for assistance.
4.4Clothing and equipment
WARNING
■ Long hair may be pulled into the long-reach hedge
trimmer during operation. This may result in serious injury
to the user.
► Tie up and confine long hair above your shoulders.
■ Objects can be thrown at high speed during operation.
This may result in injury to the user.
► Wear close-fitting safety glasses. Suitable
safety glasses are tested in accordance with
EN 166 or national regulations and
available commercially with the
corresponding marking.
■ Falling objects can cause head injuries.
► wear a hard hat.
■ Dust can be whipped up during operation. Whipped up
dust can damage the respiratory passages and cause
allergic reactions.
► If dust is generated: Wear a dust respirator mask.
■ Unsuitable clothing may snag on wood, thickets or the
long-reach hedge trimmer. Users not wearing suitable
clothing are at risk of serious injury.
► Wear close-fitting clothing.
► Remove scarves and jewelry.
■ The user may come into contact with the cutting blades
during cleaning or servicing. This may result in injury to
the user.
► Wear work gloves made from resistant
material.
■ Wearing unsuitable footwear may cause the user to slip.
This may result in injury to the user.
► Wear sturdy, closed-toed footwear with
high-grip soles.
4.5Work Area and Surroundings
4.5.1Long-reach hedge trimmer
WARNING
■ Bystanders, children and animals cannot recognize or
assess the dangers of the long-reach hedge trimmer or
flying debris. This may result in serious injury to
bystanders, children and animals and damage to property.
► Do not allow bystanders, children
or animals within 5 meters of the
work area.
► Maintain a clearance of 5 meters from objects.
8
0458-683-0121-B
4 Safety Precautions
English
► Do not leave the long-reach hedge trimmer unattended.
► Ensure that children cannot play with the long-reach
hedge trimmer.
■ Electrical components of the long-reach hedge trimmer
can generate sparks. Sparks may cause fires and
explosions in highly flammable or explosive environments.
Persons may be seriously or fatally injured and property
may be damaged.
► Do not work in a highly flammable or explosive
environment.
4.5.2Battery
WARNING
■ Bystanding people, children and animals cannot
recognise or evaluate the dangers posed by the battery.
This may result in serious injury to bystanding people,
children and animals.
► Keep bystanding people, children and animals out of the
way.
► Do not leave the battery unattended.
► Make sure that children cannot play with the battery.
■ The battery is not protected against all ambient
conditions. If exposed to certain ambient conditions, the
battery may catch fire or explode. This may result in
serious injury to people and damage to property.
► Protect the battery from heat and fire.
► Do not throw the battery into a fire.
► Use and store the battery at temperatures
between - 10 °C and + 50 °C.
► Do not immerse the battery in liquids.
► Keep the battery away from metallic objects.
► Do not expose the battery to high pressure.
► Do not expose the battery to microwaves.
► Protect the battery from chemicals and salts.
4.6Safe Condition
4.6.1Long-reach hedge trimmer
The long-reach hedge trimmer is in a safe condition if the
following points are observed:
– The long-reach hedge trimmer is not damaged.
– The long-reach hedge trimmer is clean.
– The controls function properly and have not been
modified.
– The cutting blades are correctly fitted.
– Only original STIHL accessories designed for this long-
reach hedge trimmer are fitted.
– The accessories are correctly attached.
WARNING
■ If not in safe condition, components may no longer
operate correctly and safety devices may be disabled.
This may result in serous or fatal injury to people.
► Work only with an undamaged long-reach hedge
trimmer.
► If the long-reach hedge trimmer is dirty: Clean the long-
reach hedge trimmer.
► Do not modify the long-reach hedge trimmer.
► If the controls do not function properly: Do not work with
the long-reach hedge trimmer.
0458-683-0121-B
9
English
4 Safety Precautions
► Only fit original STIHL accessories designed for this
long-reach hedge trimmer.
► Attach accessories as described in this User Manual or
in the User Manual for the accessories.
► Never insert objects into the openings of the long-reach
hedge trimmer.
► Replace worn or damaged labels.
► If you have any doubts, be sure to consult a STIHL
dealer.
4.6.2Cutting Blades
The cutting blades are in a safe condition if the following
points are observed:
– Cutting blades are undamaged.
– Cutting blades are not deformed.
– Cutting blades move freely.
– Cutting blades are properly sharpened.
– Cutting blades have no burrs.
WARNING
■ If they are in an unsafe condition, parts of the cutting
blades may come off and be thrown at high speed. This
can result in serious injuries.
► Work only with undamaged cutting blades.
► Make sure the cutting blades are properly sharpened
and deburred.
► If you have any queries: Contact your STIHL servicing
dealer.
4.6.3Battery
The battery is in safe condition when the following conditions
are met:
– The battery is not damaged.
– The battery is clean and dry.
– The battery is working and has not been modified.
WARNING
■ The battery cannot function safely if it is not in safe
condition. There is a risk of serious injury to persons.
► Use an undamaged and functioning battery.
► Do not charge a damaged or defective battery.
► If the battery is dirty or wet: clean the battery and allow
it to dry.
► Do not modify the battery.
► Do not insert objects into the apertures in the battery.
► Never connect the battery terminals to metallic objects
and cause a short circuit.
► Do not open the battery.
► Replace worn or damaged warning signs.
■ Fluid may leak from a damaged battery. If the fluid
contacts the skin or eyes, this may cause irritation.
► Avoid contact with the fluid.
► In the event of contact with the skin: wash the affected
areas with plenty of soap and water.
► In the event of contact with the eyes: rinse the eyes with
plenty of water for at least 15 minutes and seek medical
attention.
■ A damaged or defective battery may emit an unusual
odour, smoke or catch fire. This may result in serious or
fatal injury to people and damage to property.
► If the battery emits an unusual odour or smoke: do not
use the battery and keep it away from flammable
materials.
► If the battery catches fire: try to extinguish the battery
using a fire extinguisher or water.
10
0458-683-0121-B
4 Safety Precautions
English
4.7Working
WARNING
■ In certain situations, the user may no longer be able to
concentrate on their work. This may result in the user
stumbling, falling and suffering serious injury.
► Keep calm and plan your work.
► If light and visibility are poor: Do not work with the long-
reach hedge trimmer.
► Operate the long-reach hedge trimmer alone.
► Watch out for obstacles.
► Work standing on the ground and keep your balance. If
you have to work at a height: Use a mobile elevating
work platform or secure scaffolding.
► If you start feeling fatigue: Take a break.
■ Working above shoulder height can cause fatigue sooner.
This may result in serious injury to the user.
► Work above shoulder height for short periods only.
► Take breaks.
■ If the moving cutting blade makes contact with a hard
object it can be brought to a sudden stop. The reactive
forces that occur can cause the user to lose control of the
long-reach hedge trimmer and be seriously injured.
► Hold the long-reach hedge trimmer firmly with both
hands.
► Before starting work, check hedge for hard objects and
remove any such objects.
■ The moving cutting blades can cut the user. This may
result in serious injury to the user.
► Do not touch moving cutting blades.
► If the cutting blades are blocked by an
object: Switch off the long-reach hedge
trimmer and remove the battery. before
clearing the jam.
■ If the behavior of the long-reach hedge trimmer changes
during operation or feels unusual, it may no longer be in a
safe condition. This may result in serious injury to people
and damage to property.
► Stop working, remove the battery and consult a STIHL
dealer.
■ Vibrations may occur while using the long-reach hedge
trimmer.
► Wear gloves.
► Take breaks.
► If signs of a circulatory disturbance occur: Consult a
doctor.
■ Note that the cutting blades continue to run for a short
period after you release the trigger. The moving cutting
blades may cut the user. They may cause serious injury to
persons.
► Wait until the cutting blades come to a complete
standstill.
■ In an emergency, the user may start to panic and forget to
take off the carrying system. This may result in serious
injury to the user.
► Practice taking off the carrying system.
DANGER
■ Working near live electric cables may result in accidental
contact with and damage to the cutting blades. This may
result in serious or fatal injury to the user.
► Maintain a clearance of 15 meters
from live cables.
0458-683-0121-B
11
English
4 Safety Precautions
4.8Transporting
4.8.1Hedge Trimmer
WARNING
■ The hedge trimmer may turn over or shift during transport.
This may result in personal injuries and damage to
property.
► Remove the battery.
► Fit the blade scabbard so that it completely covers the
cutting blades.
► Secure the hedge trimmer with lashing straps or a net to
prevent it turning over and moving.
4.8.2Battery
WARNING
■ The battery is not protected against all ambient
conditions. The battery may be damaged if it is exposed to
certain ambient conditions and damage to property may
occur.
► Never transport a damaged battery.
► Store the battery in non-conductive packaging.
■ The battery may turn over or shift during transport. This
may result in personal injuries and damage to property.
► Pack the battery in packaging in such a way that it
cannot move.
► Secure the packaging so that it cannot move.
4.9Storing
4.9.1Long-reach hedge trimmer
WARNING
■ Children are not aware of and cannot assess the dangers
of the long-reach hedge trimmer. Children may be
seriously injured.
► Remove the battery.
► Push the blade scabbard over the cutting blades,
ensuring that it completely covers the cutting blades.
► Store the long-reach hedge trimmer out of the reach of
children.
■ Dampness can corrode the electrical contacts on the long-
reach hedge trimmer and metal components. The longreach hedge trimmer may be damaged.
► Remove the battery.
► Store the long-reach hedge trimmer in a clean and dry
condition.
4.9.2Battery
WARNING
■ Children are not aware of and cannot assess the dangers
of the battery and can be seriously injured.
► Store the battery out of the reach of children.
■ The battery is not protected against all ambient
conditions. The battery may be damaged if it is exposed to
certain ambient conditions.
► Store the battery in a clean and dry condition.
► Store the battery in an enclosed location.
12
0458-683-0121-B
4 Safety Precautions
English
► Store the battery separately from the hedge trimmer and
charger.
► Store the battery in non-conductive packaging.
► Store the battery at temperatures between -10°C and
+50°C.
4.10 Cleaning, Maintenance and Repair
WARNING
■ The long-reach hedge trimmer may start unintentionally if
the battery is left in place during cleaning, maintenance or
repair operations. This may result in serious injury to
people and damage to property.
► Remove the battery.
■ The gear housing can get hot during operation. There is a
risk of burn injuries.
► Do not touch a hot gear housing.
■ Aggressive cleaning agents, a water jet or pointed objects
can damage the long-reach hedge trimmer, cutting blades
and the battery. If the long-reach hedge trimmer, cutting
blades or battery are not cleaned correctly, components
may no longer function properly or safety devices may be
rendered inoperative. They may cause serious injury to
persons.
► Clean the long-reach hedge trimmer, cutting blades and
battery as described in this User Manual.
■ If the long-reach hedge trimmer, cutting blades or battery
are not serviced or repaired correctly, components may no
longer function properly or safety devices may be
rendered inoperative. This may result in serous or fatal
injury to people.
► Do not attempt to service or repair the long-reach hedge
trimmer or battery.
► If the long-reach hedge trimmer or the battery require
servicing or repairs: Contact your STIHL dealer for
assistance.
► Maintain the cutting blades as described in this User
Manual.
■ The user may be cut while cleaning or servicing the sharp
cutting blades. This may result in injury to the user.
► Wear work gloves made from resistant
material.
0458-683-0121-B
13
English
1
0000-GXX-1248-A0
20-40%
40-60%
60-80%
80-100%
0-20%
5 Preparing Hedge Trimmer for Operation
5Preparing Hedge Trimmer for
Operation
5.1Preparing the Long-Reach Hedge Trimmer for
Operation
The following steps must be performed before commencing
work:
► Ensure that the following components are in safe
condition:
– Long-reach hedge trimmer, @ 4.6.1.
– Cutting blades, @ 4.6.2.
– Battery, @ 4.6.3.
► Check the battery, @ 10.2.
► Charge the battery fully as described in the User Manual
for the STIHL AL 101, 300, 500 chargers.
► Clean the long-reach hedge trimmer, @ 15.1.
► Assembling the long-reach hedge trimmer, @ 7.1.
► Mount the loop handle (HLA 135), @ 7.2.
► Adjust the angle of the cutting blades, @ 11.1.
► Fit and adjust the shoulder strap, @ 11.2.
► Check the controls, @ 10.1.
► If you cannot carry out these steps: Do not use the long-
reach hedge trimmer and contact your STIHL dealer for
assistance.
6.2Displaying State of Charge
► Press the button (1).
The LEDs (5) glow green for about 5 seconds and indicate
the state of charge.
► If the LED on the right flashes green: Charge the battery.
6.3LEDs on Battery
The LEDs can show the state of charge or malfunctions. The
LEDs can glow or flash green or red.
The state of charge is indicated when the LEDs glow or flash
green.
► If the LEDs glow or flash red: Troubleshooting, @ 18.
There is a malfunction in hedge trimmer or battery.
7Assembling the Hedge Trimmer
6Charging the Battery, LEDs
6.1Charging the Battery
The charging time depends on several factors, e.g.
temperature of the battery or the ambient temperature. The
actual charging time may differ from the specified charging
time. For specified charging times see
www.stihl.com/charging-times.
► Recharge the battery fully as described in the instruction
manual for the STIHL AL 101, 300, 500 chargers.
14
7.1Assembling the Long-Reach Hedge Trimmer
► Switch off the long-reach hedge trimmer and remove the
battery.
0458-683-0121-B
8 Removing and Fitting the Battery
1
4
3
2
3
5
a
90°
90°
0000098180_001
English
► Fit the washers (2) on the screws (1).
► Press the clamp (6) against the shaft (5).
► Insert the screws (1) through holes in the loop handle (3)
and clamps (4 and 6).
► Slide the loop handle (3) until the distance (a) is 20 cm.
► Screw on and firmly tighten the nuts (7).
8Removing and Fitting the Battery
► Remove the protective cap (1).
► Undo the screws (2).
► Push the transmission (3) onto the shaft (4) in such a way
that the following conditions are met:
– In case of assembly of an HLA 135: a = approx. 53 cm
– In case of assembly of an HLA 135 K: a = approx. 38 cm
► Align the housing (5) and transmission (3) as shown.
► Tighten down the screws (2) firmly.
The long-reach hedge trimmer does not need to be
dismantled again.
7.2Mounting the Loop Handle (HLA 135)
► Switch off the long-reach hedge trimmer and remove the
battery.
1
2
1
2
8.1Inserting the Battery
1
2
0000097033-001
► Insert the battery (1) up to the limit stop into the battery
compartment (2).
The battery (1) engages with a click and is now locked.
8.2Removing the Battery
► Stand the hedge trimmer on a level surface.
3
4
a
5
6
7
► Fit the clamp (4) in the loop handle (3).
► Place the loop handle (3) with clamp (4) on the shaft (5).
0458-683-0121-B
7
0000097311_001
15
English
2
1
0000097034-001
3
1
2
0000097312_001
► Press both locking levers (1).
The battery (2) is released and can be removed.
9 Switching the Hedge Trimmer On/Off
► Press the trigger (3) with your index finger and keep
depressed.
The long-reach hedge trimmer accelerates and the cutting
blades run.
The long-reach hedge trimmer can also be switched on by
first pressing the release slide (2) and pressing the trigger
lockout (1) within 5 seconds (as long as the LEDs are
flashing). The trigger (3) is now unlocked and the long-reach
hedge trimmer is ready for use.
The LEDs continue flashing for 5 seconds after the trigger
(3) and trigger lockout (1) are released after switch-on. As
long as the LEDs flash, the long-reach hedge trimmer can be
switched on again without having to actuate the release
slide (2).
9Switching the Hedge Trimmer On/Off
9.1Switching on the long-reach hedge trimmer
► Hold the long-reach hedge trimmer with one hand on the
control handle - wrap your thumb around the handle.
► Hold the long-reach hedge trimmer firmly with your other
hand on the loop handle or handle hose - wrap your thumb
around the loop handle or handle hose.
► Press the trigger lockout (1) with your hand and keep it
pressed.
► Push the release slide (2) in the direction of the loop
handle with your thumb and hold it there.
The LEDs emit light to indicate the power level used last.
9.2Switching off long-reach hedge trimmer
► Release the trigger and trigger lockout.
► Wait until the cutting blades come to a complete standstill.
► If the cutting blades continue to run: Remove the battery
and contact your STIHL dealer for assistance.
There is a malfunction in the long-reach hedge trimmer.
10 Testing the Hedge Trimmer and
Battery
10.1 Checking the controls
Trigger lockout and trigger
► Remove the battery.
► Try pressing the trigger without pressing the trigger
lockout.
► If the trigger can be pulled: Do not use the long-reach
hedge trimmer and contact your STIHL dealer for
assistance.
The trigger lockout is faulty.
► Press and hold the trigger lockout.
► Squeeze and release the trigger.
16
0458-683-0121-B
11 Operating the Hedge Trimmer
1
2
55°
90°
0000097313_001
2
1
0000-GXX-2990-A0
► If the trigger or trigger lockout is stiff or does not spring
back to the idle position: Do not use your long-reach
hedge trimmer and contact your STIHL dealer.
The trigger or the trigger lockout is defective.
Switching on the long-reach hedge trimmer
► Insert battery.
► Press and hold the trigger lockout.
► Push the release slide in the direction of the cutting blades
with your thumb.
► Press and hold the trigger.
The cutting blades run.
► If 3 LEDs flash red: Remove the battery and consult a
STIHL dealer.
There is a malfunction in the long-reach hedge trimmer.
► Release the trigger.
The cutting blades come to a complete standstill.
► If the cutting blades continue to run: Remove the battery
and contact your STIHL dealer for assistance.
There is a malfunction in the long-reach hedge trimmer.
10.2 Testing the Battery
► Press button on battery.
The LEDs glow or flash.
► If the LEDs do not glow or flash: Do not use the battery
and contact your STIHL servicing dealer.
There is a malfunction in the battery.
English
► Pull back the sliding sleeve (1) and hold it there.
► Grip the swivel handle (2) and swing cutting blade to
required angle.
► Release the sliding sleeve (1).
► Move swivel handle (2) back and forth until the sliding
sleeve (1) engages.
The sliding sleeve (1) butts against the housing. You have
adjusted the angle of the cutting blades.
► Check that the swivel handle (2) cannot be pushed in or
pulled out any more.
11.2 Fitting and Adjusting the Shoulder Strap
11 Operating the Hedge Trimmer
11.1 Adjusting the Angle of the Cutting Blades
The angle of the cutting blades can be adjusted to 4 different
positions upwards and 7 different positions downwards to
suit the application and the height and reach of the user.
► Switch off the long-reach hedge trimmer and remove the
battery.
0458-683-0121-B
► Put on the shoulder strap (1).
► Adjust the shoulder strap (1) so that the carabiner (2) is
about a hand’s width below your right hip.
Other approved carrying systems are listed in this User
Manual, @ 20.
17
English
1
2
0000097314_001
11 Operating the Hedge Trimmer
11.3 Holding and controlling the long-reach hedge
trimmer
1
2
► Connect the carrying ring (2) to the carabiner (1).
► Hold the long-reach hedge trimmer with one hand on the
control handle and clasp the control handle with your
thumb.
► Hold the long-reach hedge trimmer firmly with your other
hand on the handle hose and clasp the handle hose with
your thumb.
HLA 135
0000-GXX-7807-A1
► Hold the long-reach hedge trimmer with one hand on the
control handle and clasp the control handle with your
thumb.
► Hold the long-reach hedge trimmer with your other hand
on the loop handle and clasp the loop handle with your
thumb.
11.4 Setting the performance level
Depending on the application, 3 power levels can be set.
The LEDs indicate the selected power level. The higher the
power level, the faster the cutting blades can run.
The selected power level affects the battery’s runtime. The
0000097178_001
lower the power level, the longer the runtime.
0000-GXX-4570-A0
18
► Press and hold the trigger lockout (1).
0458-683-0121-B
11 Operating the Hedge Trimmer
0000084758_002
► Push the release slide (2) in the direction of the cutting
blades with your thumb.
The LEDs emit light to indicate the power level selected.
► Push the release slide (2) forwards, hold it briefly in that
position and allow it to spring back.
This selects the next power level. After the third
performance level, it starts again with the first
performance level.
► Push the release slide (2) forwards and allow it to spring
back as many times as necessary to select the required
power level.
English
11.5 Cutting
Cutting close to the ground (HLA 135)
► Set the cutting blades to a suitable angle.
► Swing the long-reach hedge trimmer evenly back and forth
in an arc.
► Move forward slowly in a controlled manner.
► If cutting performance deteriorates: Sharpen the cutting
blades.
Cutting the side of the hedge
► Use pruning shears or a chainsaw to cut out thick
branches first.
► If you have to cut at a certain distance from the hedge: Set
the cutting blades to a suitable angle.
► Swing the long-reach hedge trimmer in an arc at one side
of the hedge while making the cut.
► Move forward slowly in a controlled manner.
► Cut the other side of the hedge in the same way.
► If cutting performance deteriorates: Sharpen the cutting
blades.
Cutting the top of the hedge
► Use pruning shears or a chainsaw to cut out thick
branches first.
0000084757_002
0000097227_002
► Hold the cutting blades at an angle of 0° to 10° to the top
of the hedge.
► Swing the long-reach hedge trimmer horizontally and in an
arc while making the cut.
0458-683-0121-B
19
English
0000097226_001
12 After Finishing Work
► If cutting performance deteriorates: Sharpen the cutting
blades.
Cutting overhead
► Use pruning shears or a chainsaw to cut out thick
branches first.
► Set the cutting blades completely to a suitable angle.
► Hold the cutting blades at an angle of 0° to 10° to the top
of the hedge.
► Swing the long-reach hedge trimmer horizontally and in an
arc while making the cut.
► If cutting performance deteriorates: Sharpen the cutting
blades.
12 After Finishing Work
12.1 When Work is Finished
► Switch off the long-reach hedge trimmer and remove the
battery.
► If the long-reach hedge trimmer is wet: Allow the hedge
trimmer to dry.
► If the battery is wet: Leave the battery to dry.
► Clean the long-reach hedge trimmer.
► Clean cutting blades.
► Push the blade scabbard over the cutting blades, ensuring
that it completely covers the cutting blades.
► Clean the battery.
13 Transporting
13.1 Transporting the long-reach hedge trimmer
► Switch off the long-reach hedge trimmer and remove the
battery.
► Push the blade scabbard over the cutting blades, ensuring
that it completely covers the cutting blades.
Carrying the long-reach hedge trimmer
2
1
► Pull back and hold the sliding sleeve (4).
► Grip the swivel handle (3) and fold down the cutting
blades (1).
The cutting blades (1) are parallel to the shaft (2).
► Release the sliding sleeve (4).
The sliding sleeve (4) engages and is positioned on the
housing. The cutting blades (1) are in the transport
position.
► Carry the long-reach hedge trimmer with one hand on the
shaft, ensuring that the cutting blades (1) are pointing to
the rear.
Transporting the long-reach hedge trimmer in a vehicle
► Secure the hedge trimmer so that it cannot turn over or
move.
4
3
0000097315_001
20
0458-683-0121-B
14 Storing
English
13.2 Transporting the Battery
► Switch off the hedge trimmer and remove the battery.
► Make sure the battery is in a safe condition.
► Observe the following points when packing the battery:
– The packaging must be non-conductive.
– Make sure the battery cannot shift inside the packaging.
► Secure the packaging so that it cannot move.
The battery is subject to the requirements for the transport
of dangerous goods. The battery is classified as UN 3480
(lithium-ion batteries) and has been tested in accordance
with UN Manual of Tests and Criteria, Part III, sub-section
38.3.
For transport regulations see www.stihl.com/safety-datasheets
14 Storing
14.1 Storing the Hedge Trimmer
► Switch off the hedge trimmer and remove the battery.
► Fit the blade scabbard so that it completely covers the
cutting blades.
► Observe the following points when storing the hedge
trimmer:
– Hedge trimmer is out of the reach of children.
– Hedge trimmer is clean and dry.
14.2 Storing the Battery
STIHL recommends that you store the battery with a charge
between 40% and 60% (2 LEDs glow green).
► Observe the following points when storing the battery:
– Battery is out of the reach of children.
– Battery is clean and dry.
– Battery is in an enclosed location.
– Battery is stored separately from the hedge trimmer and
charger.
– Battery is in non-conductive packaging.
– Battery is in a temperature range between -10°C and
+50°C.
15 Cleaning
15.1 Cleaning the long-reach hedge trimmer
► Switch off the long-reach hedge trimmer and remove the
battery.
► Clean the long-reach hedge trimmer with a damp cloth or
STIHL resin solvent.
► Clean vents with a paintbrush.
► Remove foreign objects from the battery compartment and
clean the battery compartment with a damp cloth.
► Clean the electrical contacts in the battery compartment
with a paintbrush or soft brush.
15.2 Cleaning the Cutting Blades
► Switch off the hedge trimmer and remove the battery.
► Spray both sides of blades with STIHL resin solvent.
► Fit the battery.
► Switch on the hedge trimmer for 5 seconds.
The cutting blades run. STIHL resin solvent is distributed
evenly.
15.3 Cleaning the Air Filter
► Switch off the long-reach hedge trimmer and remove the
battery.
0458-683-0121-B
21
English
0000097125-001
1
2
16 Maintenance
After every 50 hours of operation
► Clean the air filter.
Annually
► Have the long-reach hedge trimmer checked by a STIHL
dealer.
16.2 Lubricating the gearbox
► Clean the area around the air filter (2) with a damp cloth
or a soft brush.
► Turn the screw (1) counterclockwise until the air filter (2)
can be removed.
► Swing the air filter (2) upwards and pull it off.
► Pass the air filter (2) under running water to rinse off
coarse dirt from the outside.
► If the air filter (2) is damaged: Install a new air filter (2).
► Allow the air filter (2) to dry in the air.
► Install the air filter (2) in the housing and fold it down.
The air filter (2) must sit flush in the housing at all sides.
► Insert and tighten down the screw (1) firmly.
15.4 Cleaning the Battery
► Clean the battery with a damp cloth.
16 Maintenance
16.1 Maintenance intervals
Maintenance intervals depend on the ambient conditions
and the operating conditions. STIHL recommends the
following maintenance intervals:
After every 25 hours of operation
► Lubricate the gearbox.
2
1
1
2
► Unscrew the screw plugs (1).
► If no grease is visible at the screw plugs (1):
► Screw in the tube of "STIHL Getriebefett" (2).
► Squeeze 5 g of STIHL gear grease into the gear
housing.
► Unscrew the tube of "STIHL Getriebefett" (2).
► Screw in the screw plugs (1) and tighten them.
► Switch on the long-reach hedge trimmer for 1 minute.
The STIHL gear grease is distributed evenly.
16.3 Sharpening the cutting blade
STIHL recommends you have the cutting blades
resharpened by a STIHL dealer.
WARNING
The teeth of the cutting blades are very sharp. This may
result in the user cutting themselves.
► Wear work gloves made from resistant material.
0000097316_001
22
0458-683-0121-B
17 Repairing
English
► Switch off the long-reach hedge trimmer and remove the
battery.
► Use a STIHL flat file to sharpen each cutting edge on the
upper blade. The file only sharpens on the forward stroke.
Maintain the prescribed sharpening angle, @ 19.2.
► Turn the long-reach hedge trimmer over.
► Sharpen the remaining cutting edges.
► Deburr each cutting edge from below.
► Turn the long-reach hedge trimmer over.
► Deburr the remaining cutting edges.
► Use a damp cloth to remove the filing dust.
► Spray both sides of cutting blades with STIHL resin
solvent.
► Switch on the long-reach hedge trimmer for 5 seconds.
The cutting blades run. STIHL resin solvent is distributed
evenly.
► If you have any doubts, be sure to consult a STIHL dealer.
► If the battery has a malfunction or is damaged: Replace
the battery.
0000-GXX-1426-A0
17 Repairing
17.1 Repairing the Hedge Trimmer and Battery
The hedge trimmer, cutting blades and battery cannot be
repaired by the user.
► If the hedge trimmer or cutting blades are damaged: Do
not use your hedge trimmer and contact your STIHL
servicing dealer.
0458-683-0121-B
23
English
18 Troubleshooting
18.1 Troubleshooting Hedge Trimmer and Battery
ConditionLEDs on BatteryCauseRemedy
Hedge trimmer does
not start when
switched on.
Hedge trimmer cuts
out during operation.
1LED flashes
green.
1 LED glows red. Battery too hot or too cold. ► Remove the battery.
3 LEDs flash red. There is a malfunction in
3 LEDs glow red. Hedge trimmer is too hot.► Remove the battery.
4 LEDs flash red. There is a malfunction in
3 LEDs glow red. Hedge trimmer is too hot.► Remove the battery.
Battery has low charge.► Recharge the battery fully as described in the
instruction manual for the STIHL AL 101, 300, 500
chargers.
► Allow battery to cool down / warm up.
► Remove the battery.
the hedge trimmer.
Cutting blades do not run
freely.
the battery.
No electrical contact
between hedge trimmer
and battery.
Hedge trimmer or battery
damp.
► Clean contacts in battery compartment.
► Fit the battery.
► Switch on the hedge trimmer.
► If 3 LEDs continue to flash red: Do not use the
hedge trimmer and contact your STIHL dealer for
assistance.
► Spray both sides of blades with STIHL resin
solvent.
► If 3 LEDs continue to flash red: Do not use the
hedge trimmer and contact your STIHL dealer for
assistance.
► Allow the hedge trimmer to cool down.
► Remove battery and insert it again.
► Switch on the hedge trimmer.
► If 4 LEDs continue to flash red: Do not use the
battery and contact your STIHL dealer for
assistance.
► Remove the battery.
► Clean contacts in battery compartment.
► Fit the battery.
► Allow hedge trimmer or battery to dry.
► Allow the hedge trimmer to cool down.
18 Troubleshooting
24
0458-683-0121-B
18 Troubleshooting
ConditionLEDs on BatteryCauseRemedy
Hedge trimmer
runtime is too short
There is a electrical
malfunction.
Battery not fully charged.► Recharge the battery fully as described in the
► Remove battery and insert it again.
► Switch on the hedge trimmer.
instruction manual for the STIHL AL 101, 300, 500
chargers.
Normal battery life has
► Replace the battery.
been exceeded.
English
0458-683-0121-B
25
English
19 Specifications
19 Specifications
19.1 STIHL HLA 135, HLA 135 K long-reach hedge
trimmer
HLA 135
– Permitted batteries:
–STIHL AP
–STIHL AR
– Weight without battery: 5.6 kg
– Degree of electrical protection: IPX4 (protection against
splash water from any direction)
HLA 135 K
– Permitted batteries:
–STIHL AP
–STIHL AR
– Weight without battery: 5.2 kg
– Degree of electrical protection: IPX4 (protection against
splash water from any direction)
The running time is shown at www.stihl.com/battery-life.
19.2 Cutting blades
HLA 135
– Tooth spacing: 34 mm
– Cutting length: 600 mm
– Sharpening angle: 45°
HLA 135 K
– Tooth spacing: 34 mm
– Cutting length: 600 mm
– Sharpening angle: 45°
19.3 STIHL AP battery
– Battery Technology: Lithium-ion
– Voltage: 36 V
– Capacity in Ah: see rating label
– Energy content in Wh: see rating label
– Weight in kg: see rating label
– Permissible temperature range for operation and storage:
-10°C to +50°C
19.4 Sound Values and Vibration Values
The K-value for sound pressure levels is 2 dB(A). K-value for
sound power levels is 2 dB(A). The K-value for vibration
levels is 2 m/s².
HLA 135
STIHL recommends wearing ear defenders.
– Sound pressure level L
ISO 22868: 85 dB(A)
– Sound power level L
ISO 22868: 96 dB(A)
– Vibration level a
handle hose
– Control handle: 3.3 m/s²
– Handle hose: 2.5 m/s²
– Vibration level a
loop handle
– Control handle: 2.5 m/s²
– Loop handle: 3.7 m/s²
HLA 135 K
STIHL recommends wearing ear defenders.
– Sound pressure level L
ISO 22868: 85 dB(A)
– Sound power level L
ISO 22868: 96 dB(A)
measured according to ISO 22867, with
hv
measured according to ISO 22867, with
hv
measured according to
pA
measured according to
wA
measured according to
pA
measured according to
wA
26
0458-683-0121-B
19 Specifications
English
– Vibration level a
measured according to ISO 22867
hv
– Control handle: 2.7 m/s²
– Handle hose: 2.3 m/s²
The vibration levels indicated were measured according to a
standardized test method and can be used as a basis for
comparing electric power tools. The vibration levels actually
occurring may vary from the values indicated, depending on
the type of application. The vibration levels indicated can be
used for an initial estimate of the vibration stress. The actual
vibration stress has to be estimated. The times when the
electric power tool is switched off and the times when it is
switched on but running under no load can be taken into
account in the estimate.
For information on compliance with Employers' Vibration
Directive 2002/44/EC see www.stihl.com/vib.
19.5 REACH
REACH is an EC regulation and stands for the Registration,
Evaluation, Authorisation and Restriction of Chemical
substances.
For information on compliance with the REACH regulation
see www.stihl.com/reach.
0458-683-0121-B
27
English
20 Combinations of Carrying Systems
20 Combinations of Carrying Systems
20.1 Combinations of Carrying Systems
The long-reach hedge trimmer must be used only in
combination with a carrying system. Approved carrying
systems are listed in this User Manual:
Shoulder strap
Full harness
STIHL AR battery together with the support
cushion
Battery belt with strap and attached “AP belt bag
with connecting cable” together with the support
cushion
Battery belt with attached “AP belt bag with
connecting cable” together with the shoulder
strap
Carrying system with built-in “AP belt bag with
connecting cable” together with the support
cushion
RTS backpack carrying system
21 Spare Parts and Accessories
21.1 Spare parts and accessories
These symbols indicate original STIHL spare
parts and original STIHL accessories.
STIHL recommends the use of original STIHL spare parts
and accessories.
Despite ongoing market observation, STIHL is unable to
judge the reliability, safety and suitability of other
manufacturers' spare parts and accessories; accordingly,
STIHL cannot warrant for the use of those parts.
Original STIHL spare parts and original STIHL accessories
are available from STIHL dealers.
22 Disposal
22.1 Disposing of the Hedge Trimmer and Battery
Contact the local authorities or your STIHL dealer for
information on disposal.
Improper disposal can be harmful to health and pollute the
environment.
► Take STIHL products including packaging to a suitable
collection point for recycling in accordance with local
regulations.
► Do not dispose with domestic waste.
23 EC Declaration of Conformity
28
23.1 STIHL HLA 135, HLA 135 K long-reach hedge
trimmer
ANDREAS STIHL AG & Co. KG
Badstraße 115
0458-683-0121-B
24 UKCA Declaration of Conformity
English
D-71336 Waiblingen
Germany
declare under our sole responsibility that
– Category: Cordless long-reach hedge trimmer
– Manufacturer's brand: STIHL
– Model: HLA 135, HLA 135 K
– Serial identification: HA04
conforms to the relevant provisions of Directives
2011/65/EU, 2006/42/EC, 2014/30/EU and 2000/14/EC and
has been developed and manufactured in compliance with
the following standards in the versions valid on the date of
production: EN 55014-1, EN 55014-2, EN 62841-1 and
EN 62841-4-2.
Applied conformity assessment procedure in accordance
with Directive 2000/14/EC, Annex V.
– Measured sound power level: 96 dB(A)
– Guaranteed sound power level: 98 dB(A)
The technical documents are stored at
ANDREAS STIHL AG & Co. KG Produktzulassung.
The year of manufacture, country of manufacture and serial
number are shown on the long-reach hedge trimmer.
Done at Waiblingen, 15.07.2021
ANDREAS STIHL AG & Co. KG
pp
Dr. Jürgen Hoffmann, Director Product Certification &
Regulatory Affairs
24 UKCA Declaration of Conformity
24.1 STIHL HLA 135, HLA 135 K long-reach hedge
trimmer
ANDREAS STIHL AG & Co. KG
Badstraße 115
D-71336 Waiblingen
Germany
declare under our sole responsibility that
– Category: Cordless long-reach hedge trimmer
– Manufacturer's brand: STIHL
– Model: HLA 135, HLA 135 K
– Serial identification: HA04
conforms to the relevant provisions of UK regulations The
Restriction of the Use of Certain Hazardous Substances in
Electrical and Electronic Equipment Regulations 2012,
Supply of Machinery (Safety) Regulations 2008,
Electromagnetic Compatibility Regulations 2016 and Noise
Emission in the Environment by Equipment for use Outdoors
Regulations 2001 and has been manufactured in
compliance with the following standards in the versions valid
on the date of production: EN 55014-1, EN 55014-2,
EN 62841-1, and EN 62841-4-2.
Applied conformity assessment procedure in accordance
with UK regulations Noise Emission in the Environment by
Equipment for use Outdoors Regulations 2001 Schedule 8.
– Measured sound power level: 96 dB(A)
– Guaranteed sound power level: 98 dB(A)
0458-683-0121-B
The technical documents are stored at ANDREAS
STIHL AG & Co. KG Produktzulassung.
29
English
25 General Power Tool Safety Warnings
The year of manufacture, country of manufacture and serial
number are shown on the long-reach hedge trimmer.
Done at Waiblingen, 15.07.2021
ANDREAS STIHL AG & Co. KG
pp
Dr. Jürgen Hoffmann, Director Product Certification &
Regulatory Affairs
25 General Power Tool Safety Warnings
25.1 Introduction
This chapter reproduces the pre-formulated, general safety
precautions specified in the IEC 62841 standard for handheld motor-operated electric tools.
STIHL is obliged to publish these texts.
The safety precautions and warnings on avoiding an electric
shock given under “Electrical Safety” do not apply to STIHL
cordless products.
WARNING
Read all safety warnings, instructions, illustrations and
specifications provided with this power tool. Failure to follow
all instructions listed below may result in electric shock, fire
and/or serious injury. Save all warnings and instructions for
future reference.
The term "electric power tool" in the safety warnings refers
to mains-operated (corded) power tools or battery-operated
(cordless) power tools.
25.2 Work area safety
a)Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
b)Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
25.3 Electrical safety
a) Power tool plugs must match the outlet. Never modify the
plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools.Unmodified plugs and
matching outlets will reduce risk of electric shock.
b)Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators. There
is an increased risk of electric shock if your body is
earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water
entering a power tool will increase the risk of electric
shock.
d)Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away from
heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
e)When operating a power tool outdoors, use an extension
cord suitable for outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
25.4 Personal safety
a)Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
30
0458-683-0121-B
25 General Power Tool Safety Warnings
English
alcohol or medication. A moment of inattention while
operating power tools may result in serious personal
injury.
b)Use personal protective equipment. Always wear eye
protection. Protective equipment such as a dust mask,
non-skid safety shoes, hard hat or hearing protection used
for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the
off-position before connecting to power source and/or
battery pack, picking up or carrying the tool. Carrying
power tools with your finger on the switch or energising
power tools that have the switch on invites accidents.
d)Remove any adjusting key or wrench before turning the
power tool on. A wrench or a key left attached to a rotating
part of the power tool may result in personal injury.
e)Do not overreach. Keep proper footing and balance at all
times. This enables better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery.
Keep your hair and clothing away from moving parts.
Loose clothes, jewellery or long hair can be caught in
moving parts.
g)If devices are provided for the connection of dust
extraction and collection facillities, ensure these are
connected and properly used. Use of dust collection can
reduce dust-related hazards.
h)Do not let familiarity gained from frequent use of tools
allow you to become complacent and ignore tool safety
principles. A careless action can cause severe injury
within a fraction of a second.
25.5 Power tool use and care
a)Do n o t force t he powe r tool. U se the c orrect p ower t o ol for
your application. The correct power tool will do the job
better and safer at the rate for which it was designed.
b)Do not use the power tool if the switch does not turn it on
and off. Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or remove
the battery pack, if detachable, from the power tool before
making any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce the
risk of starting the power tool accidentally.
d)Store idle power tools out of the reach of children and do
not allow persons unfamiliar with the power tool or these
instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
e)Maintain power tools and accessories. Check for
misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the power
tool’s operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to
bind and are easier to control.
g)Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into account
the working conditions and the work to be performed. Us e
of the power tool for operations different from those
intended could result in a hazardous situation.
h)Keep handles and grasping surfaces dry, clean and free
from oil and grease. Slippery handles and grasping
surfaces do not allow for safe handling and control of the
tool in unexpected situations.
25.6 Battery tool use and care
a)Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with
another battery pack.
b)Use power tools only with specifically designated battery
packs. Use of any other battery packs may create a risk of
injury and fire.
0458-683-0121-B
31
English
25 General Power Tool Safety Warnings
c) When battery pack is not in use, keep it away from other
metal objects, like paper clips, coins, keys, nails, screws
or other small metal objects, that can make a connection
from one terminal to another. Shorting the battery
terminals together may cause burns or a fire.
d)Under abusive conditions, liquid may be ejected from the
battery; avoid contact. If contact accidentally occurs, flush
with water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause
irritation or burns.
e)Do not use a battery pack or tool that is damaged or
modified. Damaged or modified batteries may exhibit
unpredictable behaviour resulting in fire, explosion or risk
of injury.
f) Do not expose a battery pack or tool to fire or excessive
temperature. Exposure to fire or temperature above
130 °C may cause explosion.
g)Follow all charging instructions and do not charge the
battery pack or tool outside the temperature range
specified in the instructions. Charging improperly or at
temperatures outside the specified range may damage the
battery and increase the risk of fire.
25.7 Service
a)Have your power tool serviced by a qualified repair person
using only identical replacement parts. This will ensure
that the safety of the power tool is maintained.
b)Never service damaged battery packs. Service of battery
packs should only be performed by the manufacturer or
authorized service providers.
25.8 Hedge trimmer safety warnings
Safety instructions for hedge trimmers
a) Keep all parts of the body away from the blade. Do not
remove cut material or hold material to be cut when blades
are moving. Blades continue to move after the switch is
turned off. A moment of inattention while operating the
hedge trimmer may result in serious personal injury.
b)Carry the hedge trimmer by the handle with the blade
stopped and taking care not to operate any power switch.
Proper carrying of the hedge trimmer will decrease the risk
of inadvertent starting and resultant personal injury from
the blades.
c) When transporting or storing the hedge trimmer, always fit
the blade cover. Proper handling of the hedge trimmer will
decrease the risk of personal injury from the blades.
d)When clearing jammed material or servicing the unit,
make sure all power switches are off and the power cord
is disconnected. Unexpected actuation of the hedge
trimmer while clearing jammed material or servicing may
result in serious personal injury.
e)Hold the hedge trimmer by insulated gripping surfaces
only, because the blade may contact hidden wiring or its
own cord. Blades contacting a "live" wire may make
exposed metal parts of the hedge trimmer "live" and could
give the operator an electric shock.
f) Keep all power cords and cables away from cutting area.
Power cords or cables may be hidden in hedges or bushes
and can be accidentally cut by the blade.
g)Do not use the hedge trimmer in bad weather conditions,
especially when there is a risk of lightning. This decreases
the risk of being struck by lightning.
32
0458-683-0121-B
25 General Power Tool Safety Warnings
25.9 Additional safety instructions for extendedreach hedge trimmers
Extended-reach hedge trimmer safety warnings
a)To reduce the risk of electrocution, never use the
extended-reach hedge trimmer near any electrical power
lines. Contact with or use near power lines may cause
serious injury or electric shock resulting in death.
b)Always use two hands when operating the extended-
reach hedge trimmer. Hold the extended-reach hedge
trimmer with both hands to avoid loss of control.
c) Always use head protection when operating the extended-
reach hedge trimmer overhead. Falling debris can result
in serious personal injuries.
English
0458-683-0121-B
33
0458-683-0121-B
englisch
G
www.stihl.com
*04586830121B*
0458-683-0121-B
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.