Stiga Villa Royal, Villa Master, Villa President Instructions For Use Manual

STIGA VILLA

ROYAL

PRESIDENT

MASTER

8211-0288-05

VILLA

1.

3

2

13

1

7

9

2A

8

5

1.

2a. Master

7

9

5

1

2B

4

2b. President

2c. Royal

2B

1

4

6

1011

5

7

VILLA

V-R-REGL

12

N

N

95

OPEN

N

N

3. President - Royal

8.Royal

7. Master - President

9. Master - President

10. Royal

4.

5.

6.

VILLA

0.75 mm

11. Master - President

12. Royal

14. Master - President

13.

15.

16.

17.

18.

ENGLISH

GB

GENERAL

This symbol indicates WARNING. Per­sonal injury and/or damage to property
may result if the instructions are not
followed carefully.

You must read these instructions for
use and the accompanying pamphlet
“SAFETY INSTRUCTIONS” careful­ly, before starting up the machine.

SYMBOLS

The following symbols appear on the machine.
They are there to remind you of the care and atten­tion required in use.

This is what the symbols mean:

Warning!
Read the instruction manual and the safety
manual before using the machine.

Warning!
Watch out for discarded objects. Keep on­lookers away.

Warning!
Always wear hearing protectors.

Warning!
This machine is not designed to be driven
on public roads.

The machine, equipped with original ac­cessories, may not be driven on slopes
greater than 10º in any direction.

Warning!
Risk of burn injuries. Do not touch the si­lencer.

CONTROLS AND

INSTRUMENTS

Items 1 - 13, see figures 1 - 3.

1. IMPLEMENT LIFTER

A pedal for raising front-mounted implement to
the transport position.

To lift up the implement, press the pedal down as
far as it will go. Then release the pedal, the imple­ment lifter is now locked in the raised position.

To lower the implement, press the pedal down so
that the lock is released. Lower the implement lift­er to the working position by slowly lifting your
foot from the pedal.

2A. SERVICE BRAKE/CLUTCH
(Master)

A pedal that combines both service brake and
clutch. There are 3 positions:

1. Pedal released – forward drive
engaged. The machine will
move if a gear is engaged. Serv­ice brake not activated.

2. Pedal depressed halfway –
forward drive disengaged, gear
shifting can be performed. Serv­ice brake not activated.

3. Pedal fully depressed – for­ward drive disengaged. Service
brake fully activated.

NOTE! You must never regulate the operating
speed by slipping the clutch. Use a suitable gear in­stead, so that the right speed is obtained.

2B. SERVICE BRAKE
(President - Royal)

A pedal that acts on the machine’s braking system.
There are 3 positions: