STIEBEL ELTRON WTS 30 E, WTS 40 E Operating And Installation

BEDIENUNG UND INSTALLATION OPERATING AND INSTALLATION UTILISATION ET INSTALLATION GEBRUIK EN INSTALLATIE OBSLUHA A INSTALACE
Ladestation für Warmwasserspeicher | Charging station for DHW cylinders | Station de charge pour ballon d’eau chaude sanitaire | Laadstation voor warmwaterboiler |
Ohřívací stanice pro ohřívač vody
Contents | Operation
!
!
General information
OPERATION ________________________________________________________ 12
1. General information ��������������������������������������� 12
1.1 Document information ����������������������������������������� 12
1.2 Other relevant documents ������������������������������������ 12
1.3 Key to symbols ��������������������������������������������������12
2. Safety �������������������������������������������������������� 13
2.1 Intended use ����������������������������������������������������� 13
2.2 Incorrect use ����������������������������������������������������� 13
2.3 Safety information ���������������������������������������������� 13
2.4 CE designation ��������������������������������������������������13
2.5 Test symbols �����������������������������������������������������13
3. Device description ����������������������������������������� 13
4. Operation ��������������������������������������������������� 13
5. Cleaning, care and maintenance ������������������������� 13
INSTALLATION _____________________________________________________ 14
6. Safety �������������������������������������������������������� 14
6.1 General safety instructions ����������������������������������� 14
6.2 Instructions, standards and regulations ������������������� 14
7. Device description ����������������������������������������� 14
7.1 WTS 30 ������������������������������������������������������������ 14
7.2 Standard delivery WTS 30 ������������������������������������� 14
7.3 WTS 40 ������������������������������������������������������������ 14
7.4 Standard delivery WTS 40�������������������������������������15
8. Installation �������������������������������������������������� 15
8.1 Installation conditions and preparations ������������������ 15
9. Installation �������������������������������������������������� 15
9.1 Appliance installation ������������������������������������������ 15
9.2 Water connection ����������������������������������������������� 16
9.3 Power supply ���������������������������������������������������� 17
10. Commissioning ��������������������������������������������� 17
10.1 Filling the heat pump circuit ��������������������������������� 17
10.2 Filling the DHW cylinder circuit ������������������������������ 17
10.3 Checking the system for leaks�������������������������������� 17
11. Appliance handover ���������������������������������������� 17
12. Maintenance ������������������������������������������������ 17
13. Specification ������������������������������������������������ 17
13.1 Wiring diagram ������������������������������������������������� 17
13.2 Data table ��������������������������������������������������������18
WARRANTY ENVIRONMENT AND RECYCLING _________________________________ 21
1. General information
1.1 Document information
The chapter Operation is intended for users and heating contractors.
The chapter Installation is intended for the heating contractor.
INFORMATION Please read!
Read these instructions carefully before using the appliance and retain them for future reference. If the appliance is passed on to a third party please hand these instructions to the new user.
1.2 Other relevant documents
Heat pump operating and installation instructions DHW cylinder operating and installation instructions Heat pump manager operating instructions Pump operating instructions
1.3 Key to symbols
Symbols in this manual:
In this manual you will come across symbols and highlights. These have the following meaning:
NOTE
Identifies tips and other useful information.
WARNING Identifies information that could result in injury if ignored.
CAUTION Identifies information that could result in appliance damage if ignored.
WARNING Risk to life through electrocution!
CAUTION Risk of injury through burns!
The symbol indicates that you should do something. The
action you need to take is described step by step.
- Passages with this symbol indicate lists.
14 |WTS WWW.STIEBEL-ELTRON.COM
Operation
!
Safety
2. Safety
2.1 Intended use
This appliance is solely designed for the transfer of heat from the heat pump circuit to the DHW cylinder circuit.
This appliance is designed for domestic use. It can be used safely by untrained persons. The appliance can also be used in a non­domestic environment, e.g. in a small business, as long as it is used in the same way.
Any other use beyond that described shall be deemed inappropriate. Observation of these instructions is also part of the correct use of this appliance. Any modifications or conversions to the appliance void all warranty rights.
2.2 Incorrect use
For example, heating swimming pool water is considered incorrect use.
2.3 Safety information
CAUTION Risk of injury through scalding! Water lines and the hot water from the draw-off valve can be very hot (> 43 °C). Therefore:
3. Device description
DHW heating via primary station with plate heat exchanger system for heating floorstanding DHW cylinders. On the primary side for heat pump heating and on the secondary side for cylinder heating, both equipped with a circulation pump. Additionally equipped with a safety valve and shut-off devices, all inside thermal insulation casing. Prefitted on mounting frame for installation on a wall.
4. Operation
For this, no special measures are required.
5. Cleaning, care and maintenance
A damp cloth is sufficient for cleaning the casing. Never use abrasive or corrosive cleaning agents.
english
WARNING Injury The appliance may be used by children aged 8 and up and persons with reduced physical, sensory or mental capabilities or a lack of experience provided that they are supervised or they have been instructed on how to use the appliance safely and have understood the result­ing risks. Children must never play with the appliance. Children must never clean the appliance or perform user maintenance unless they are supervised.
2.4 CE designation
The CE designation shows that the appliance meets all the essential requirements.
2.5 Test symbols
See type plate.
wWW.STIEBEL-ELTRON.COM WTS | 15
Installation
Safety
6. Safety
Only qualified contractors should carry out installation, commissioning, maintenance and repair of the appliance.
CAUTION Risk of injury through burns! Contact with hot components can lead to burns. Therefore:
- When working on hot components, always wear protective working clothing and gloves.
- Before commencing work on the appliance, ensure that all its components have sufficiently cooled down.
6.1 General safety instructions
We guarantee trouble-free function and operational reliability only if the original accessories and spare parts intended for the appliance are used.
6.2 Instructions, standards and regulations
NOTE
Observe all applicable national and regional regulations and instructions.
NOTE
In accordance with current technical rules, install a DHW filter in the potable water line.
7. Device description
This appliance comprises several components that are described in the following diagrams.
7.1.2 DHW cylinder circuit
5
4
3
2
1
1 Ball valve 2 Circulation pump 3 Flushing, drain and fill connection 4 Plate heat exchanger 5 Safety valve 6 Non-return valve
7.2 Standard delivery WTS 30
Delivered with the appliance are:
- Wall mounting bracket
- Screws 8x70
- Screws 8x100
- Washers
- Rawl plugs
- Upper shell, thermal insulation
- Lower shell, thermal insulation
6
1
26�03�14�0022
7.1 WTS 30
7.1.1 Heat pump circuit
1
3
4
3
1 Ball valve 2 Circulation pump 3 Flushing, drain and fill connection 4 Plate heat exchanger 5 Non-return valve
7.3 WTS 40
7.3.1 Heat pump circuit
1
2
5
D0000033585
3
4
3
1 Ball valve 2 Circulation pump 3 Flushing, drain and fill connection 4 Plate heat exchanger 5 Non-return valve
1
1
5
2
D0000033587
16 |WTS WWW.STIEBEL-ELTRON.COM
Loading...
+ 8 hidden pages