Stiebel Eltron 232099, 220817, 236136, 236008 Instruction Manual
Point-of-Use Tankless for Handwashing
Mini™-E
THERMOSTATIC
Mini™ Series
POINT-OF-USE
TANKLESS ELECTRIC WATER HEATERS
800.582.8423
› Code-Compliant Thermostatic Model with
E
lectronically Controlled Output Temperature
›Proven Reliabilit y
›Exclusive Design Prevents Dry Firing
› Extremely Compact Design
›Unlimited Supply of Hot Water
www.stiebel-eltron-usa.com
Small & Reliable Water Heating for Handwashing
Sizing Guide for Commercial Point-of Use
GPM
2.6 / 1.7 / 1.4
GPM
3.5 / 2.0 / 1.7
GPM
5.4 / 2.6 / 2.0
GPM
GPM
3.4 / 2.2 / 1 .9
GPM
4.6 / 2.7 / 2.2
GPM
7.2 / 3.4 / 2.7
GPM
GPM
5.1 / 2.9
GPM
7.0 / 3.4
GPM
8 / 4.1
GPM
GPM
6.4 / 3.6
GPM
8 / 4.2
GPM
8 / 5.1
GPM
GPM
4.3 / 2.8 / 2.4
GPM
5.8 / 3.4 / 2.8
GPM
8 / 4.3 / 3.4
GPM
/ Tempra® 12
Tren d & Plus Min. activation 0.37 GPM
GPM
2.1 / 1.4
GPM
2.9 / 1.7 / 1.4
GPM
4.5 / 2.1 / 1.7
GPM
GPM
1.7
GPM
2.3 / 1.3
GPM
3.6 / 1.7 / 1.3
GPM
GPM
1.3
GPM
1.7 / 1.0
GPM
2.7 / 1.3
GPM
Stiebel Eltron Mini™ tankless water
heaters are designed for installation
at the point-of-use. Heating water
instantaneously as it flows through
the unit completely eliminates standby heat losses and saves energy.
The efficient heating elements
are controlled by a flow switch.
™
Additionally, all Mini
water
heaters are equipped with a safety
high-limit with manual reset. The
combination of meticulous German
engineering and the best available
™
materials ensures that every Mini
is of the highest quality. They have
been designed for many years of
trouble-free service. Installation
after installation has proven they
have the lowest failure rates of
any tankless water heaters in the
industry. Nobody can compare with
our exceptional reliability record and
customer support services!
Simple and easy to install, Mini
water heaters can be located above
™
or below the fixture with water
connections pointing up or down.
No pressure relief valve, drains, or
circulating pumps are needed.
THERMOSTATIC
Thermostatic Mini™-E Models
Mini™-E thermostatic tankless water heaters are the new electronically
controlled version of our famous Mini
handwashing.
The thermostatic electronic control gives them additional features beyond the
capabilities of the mechanical Mini
Code-compliant hot water output
The electronic control board in conjunction with an automatic flow rate control
allow Mini
maintain an accurate outlet water temperature, even if there are pressure
fluctuations in the water supply. This makes them eligible for installation
where output temperatures must be limited by code.
™
-E models to come factory set to deliver water at 100°F. They will
™
models.
All units come
complete
with pigtail!
Mini™-E
™
tankless electric water heaters for
7 years le akage/
3 years pa rts.
Complet e warranty
online.
Conforms to ANSI/UL
Std. 499
Certi fied to CAN/CS A
E335-1 & E335-2-35
Tested an d certi fied
by WQA a gainst NSF/
ANSI 372 f or lead fre e
compliance.
Adjustable output temperatures
Mini™-E models are factory set to deliver water at 100°F, but orders can
be placed for factory adjustment at custom temperatures. Please inquire
regarding specific needs. A Mini
™
-E can also be field adjusted by the installer
and secured to the new setting.
Multiple sink capability
Mini™-E model 6-2 can be plumbed to supply warm water for hand washing to
two sinks in warm climates.
Loading...