Stewart Filmscreen Corp RP-1013, P1000, P1500, P2000, Deluxe frame Owner's Manual

Rigid Rear Projection Screens

Owner’s Manual

TO THE INSTALLER: BE SURE TO LEAVE THIS MANUAL WITH THE OWNER.

RP-1013

• TO THE OWNER

• INSTALLATION INSTRUCTIONS

• MAINTENANCE

Printed in U.S.A.

©2004–2013 Stewart Filmscreen Corporation

Stewart Filmscreen reserves the right to make changes to the product specied in this document.

From time to time, this document is updated. Current versions of documentation are posted on the Stewart Filmscreen website at:

www.stewartlmscreen.com

Contents

To the Owner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Preparing for Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Frame Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Screen Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Product Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Rigid Rear Projection Screens: Owner’s Manual 1

Rigid Rear Projection Screens

Owner’s Manual

Congratulations on your purchase of the finest optical viewing screen
available anywhere in the world!

To create Rigid Rear Projection Screens, Stewart Filmscreen fuses
advanced optical coatings to various glass and plastic substrates. This
provides optimized image fidelity for any viewing environment.

Please take a moment to review this manual; it will help ensure you many
years of trouble-free service from your new Stewart Filmscreen product.

Preparation

Specifications regarding the individual screen dimensions, weight, and
frame type are provided by the factory when the unit is ordered. Before
beginning the installation:

 Check the specifications for the frame type. Ensure that the

aperture is the right size. (Refer to the section on frame types,
starting on page 5.)

 Ensure that the area is prepared. In general, the screen should

be installed after electricians, painters, carpet-layers, and other
craftspeople have completed their work. This minimizes the risk
of damage to the optical surface.

 Especially with large screens, ensure there is adequate access to

the installation area (e.g., door heights, width of hallways,
elevator capacity).

 Check the size and weight of the screen to be installed so that

you can plan for the number of people and equipment required
for the installation.

You will need:

 Clean gloves for handling the screen

 Suction cups of the type typically used by glass and window

installers

 A level

 Appropriate fasteners (for installations that require them)

 Appropriate tools for any fasteners used

 Sufficient ladders, if required, for the personnel supporting the

screen during the installation.

 A fork lift for very large or heavy screens

2 Stewart Filmscreen Corporation

TO THE OWNER

Before proceeding with the installation of this screen, take
time to thoroughly read and understand these installation
and operation instructions.

P

REP ARING FOR INST ALLATION