Stewart Filmscreen Corp B, C Installation Instructions Manual

T O THE INSTALLER: BE SURE TO LEAVE THIS MANUAL WITH THE OWNER.

MB/C-1101

Model B & Model C

Electriscreens

To the Owner

Installation Instructions

Operating the Screen

Maintenance

OWNER’S MANUAL

Printed in U.S.A.

©2001 Stewart Filmscreen Corporation.

Contents

To The Owner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Preparing The Installation . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Step 1. Hanging The Case . . . . . . . . . . . . . . . . . . . . . . . . . .5

Step 2. Electrical Hook-up . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Operating The Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Adjusting The Screen Extension . . . . . . . . . . . . . . . . . . . . . .9

Screen Care And Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . .11

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Model B & Model C Electriscreens: Owner’s Manual 1

Model B & Model C

Electriscreens

OWNER’S MANUAL

Congratulations on your purchase of the finest optical viewing screen
available anywhere in the world!

Please take a moment to review this manual, it will help ensure you many
years of trouble-free service from your new Stewart Filmscreen product.

About your Model B/Model C Series Electriscreen

Your Model B & Model C Electriscreens offer the most technologically
advanced roller screens in the world.

The maximum overall dimensions of the Model B screen image are 18’ high
by 26’6” wide.

The maximum overall dimensions of the Model C screen image are 25’ high
by 38’10” wide.

2 Stewart Filmscreen Corporation

T

O THE OWNER

Preparation

Specifications regarding the individual screen dimensions, weight, mounting
type, and controls are provided by the factory when the unit is ordered.
Before beginning the installation:

K Check the specifications for the type of mounting and switch

control to be used.

K Ensure that the mounting area and electrical connection are

prepared.

K Check the size and weight of the screen to be installed so that

you can plan for the number of people required for the mounting
procedure. You need at least four people to mount the smaller
screens; more are needed for larger, heavier screens.

You will need:

K Enough ladders for the personnel supporting the screen during

the mounting process

K A level

K Fasteners appropriate for the surface on which the screen is

being mounted (See instructions for the type of mount for
recommendations.)

K 2 block and tackles or scissor lifts to raise the unit into place

K Standard screwdriver

K 7/16” hex head screwdriver

Model B & Model C Electriscreens: Owner’s Manual 3

P

REPARING THE INSTALLATION

K Before proceeding with the installation of this screen,

take time to thoroughly read and understand these
installation and operation instructions.

K All electrical wiring installations must conform to local

and national codes and should be performed by
qualified service personnel.

K There are no user-serviceable parts contained within

the unit.

Caution

During installation, do not place the unit on an unstable
cart, stand, table, or ladder. The unit may fall, causing injury
to a child or adult and damage to the unit.