Stern B-280210, E-280200 Installation And Maintenance Manual

A1

INSTALLATION AND MAINTENANCE GUIDE

BEHIND MIRROR TOUCH FREE SOAP DISPENSER

A2

INDEX

1 TECHNICAL DATA

2 PRE-INSTALLATION INFORMATION

3 PACK CONTENTS

4-7 INSTALLATION

8 FILLING THE SOAP TANK

9 SETTINGS ADJUSTEMENT WITH A REMOTE CONTROL

10 BATTERIES REPLACEMENT

11 MAINTENANCE

Care and cleaning of chrome and special finishes

11 SPARE PARTS LIST

12 WARRANTY

13 TROUBLE SHOOTING

1

TECHNICAL DATA

Behind mirror Soap Dispenser B - 280210

Behind mirror Soap Dispenser E - 280200

Capacity: 1 Liter \ 33.8 oz.

Power Supply: IP 67 Battery Box for 6xD Alkaline batteries \ Transformer

Soap viscosity: 100 – 3800 cPs

Standard discharge: 0.8cc, Adjustable

Sensor range: 30-100 mm +/- 10 mm (Adjustable by remote control).

2

PRE-INSTALLATION INFO

Check contents

Separate all parts from the packaging and check each part with the “Pack contents”
section.

Make sure all parts are accounted for before discarding any packaging material.

If any parts are missing, do not attempt to install your touch free soap dispenser until
you obtain the missing parts.

Warnings

Do not install the system facing a mirror or any other electronic system operated by
an infra-red sensor.

To prevent reflection problems, it is recommended to keep a minimum distance of

1.50 meters between the soap dispenser and any other objects.

Important: Pay attention that the dimensions of the mirror compartment fits the
dimensions of the Behind Mirror Soap Dispenser plate.

3

PACK CONTENTS

Familiarize yourself with the part names and confirm that the parts are
included.

Product assembly
containing: pump with
bottle support, plate with
spout and soap tank

IP 67 Battery

Box for 6xD

Alkaline

batteries

Transformer

B VERSIONS E VERSIONS

4 screws up to 5mm
(not supplied)