STEINEL RC4 User Manual

RC 4 Service Remote

RC4

1

2

3

Functions
Dimming function

1

The RC4

remote enables the user to

dim up or down to desired levels when
used with the Control Pro DIM-24

sensors and 0-10 volt dimming bal

lasts. The last light level adjustment
setting is saved and will return after
being switched ‘OFF’ and then back
‘ON’ again by the RC 4, switch or

presence detection.

Light ‘ON’/ ‘OFF’

2

The ON/OFF remote feature allows the

occupant to conveniently turn lighting
OFF and ON again such as needed dur­ing video or presentation viewing.
Controls only lighting and does not ef­fect HVAC outputs of the COM2-24. The
ON/OFF function works with all of the
Control Pro sensors.

Reset

3

Returns settings to those selected

manually on the detector or to the fa­tory setting (only applies to settings
that can be changed by remote con­trol)

Description

The RC 4 user remote control gives the
occupant the ability to turn lighting ‘ON’
or ‘OFF’ with the entire line of Control Pro
sensors via remote control. The dimming
functions are only available with the DIM­24 sensors. Each valid press of a button
is indicated by a blue LED flash on the
sensor.

www.steinel.net [phone]

www.steinel.net [phone]

Project Name:

Address:

Commissioning Agent:

Agent’s Phone #:

Date:

Line Room #Sensor Model Ultrasonic

Reach/Distance

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

Time Delay HVAC Delay OFF

(COM2-24 Only)

Light Level Ultrasonic

Sensitivity

Reset Notes

Warranty

STEINEL America warrants its products
against defects in material or workmanship
for a period of five years. STEINEL will
replace or repair the item provided that it
has not been altered or subjected to abuse,
accident, improper installation or improper
use. There are no obligations or liabilities

on the part of STEINEL for consequential
damages arising out of or in connection with
the use or performance of this product or
other indirect damages with respect to loss
of property, revenue, or profit, or cost of
removal, installation or reinstallation.

STEINEL America Inc.

9051 Lyndale Avenue South

USA - Bloomington, MN 55420

Tel: [phone]

Fax: [phone]

www.steinel.net

Technical changes subject to no prior notification.

M-11161-1