
STATE SUPER HIGH EFFICIENCY
96% Thermal
GAS WATER HEATERS
Efficiency
RESIDENTIAL PREMIER®POWER VENT DV • COMMERCIAL FORCE 90+
• 96% Thermal Efficiency
• 100,000 BTU Input
• 164-Gallon First Hour Delivery
• 129 GPH Recovery
• 22˝ Diameter Footprint
• Easy To Install
™

PREMIER®POWER VENT DV
RESIDENTIAL GAS WATER HEATER
The ideal choice for high-demand homes
With the Premier®Power Vent DV, you have a water heater with 96% thermal efficiency
for high-demand residential applications. Homeowners can say goodbye to cold showers
because this advanced alternative to larger water heaters or tankless units can go
“nonstop.” Continuous* flow ensures a supply that’s always ready for one more hot shower.
Designed for today’s lifestyles,
the Premier®Power Vent DV is wellsuited for larger homes with multiple
bathrooms and whirlpool tubs and for
families with teenagers, who typically
take longer and more frequent showers
Unlike standard 50-gallon units,
this water heater has a substantially higher
first-hour delivery and recovery, providing
homeowners with a nonstop flow of hot water.*
And with 96% thermal efficiency, it heats
more water for significantly less, which
equates to welcome energy savings.
FORCE 90+
.
™
Compared to on-demand water
heaters,
manages changes in demand more effectively
and delivers a nonstop* supply of hot water.
And unlike tankless units, there won’t be
any surprises during installation because size
and placement of gas and water lines are
identical to a conventional tank-type
gas water heater.
the Premier®Power Vent DV
COMMERCIAL GAS WATER HEATER
A force for high efficiency at 96%
State offers a truly comprehensive line of commercial gas and electric water heaters, plus
commercial storage tanks up to 10,000 gallons. And when a light commercial application
calls for the very best, look to State’s line of high efficiency Force 90+
superior performance from the inside out!
™
units to deliver
With a design for light commercial
applications,
BTU input into the tank to deliver more hot
water than any “conventional” 50-gallon unit.
With its compact 22˝ footprint, Force 90+
the ideal choice to give smaller businesses and
institutions more hot water in the same space
or less than conventional units, with significant
savings on their energy bills.
Get maximum service life with a
quality commercial grade glass lining,
protected by two anode rods, to meet the
demands of commercial applications. The
interior of the heat exchanger is also glasslined
to protect against flue gas condensate.
* 4.3 GPM continuous flow, based on 65ºF inlet water temperature and 110ºF outlet water temperature.
the Force 90+™puts 100,000
™
is
Helical coil heat exchanger provides
maximum heating power
conventional light-commercial heaters with a
“flue tube” that vents hot combustion gases
straight up and out, the Force 90+
96% thermal efficiency by circulating them
around and around. This design provides much
more heat transfer surface, keeps heat in the
heat exchanger longer, and allows the Force
™
90+
to handle 100,000 BTU input for
extraordinary water heating power.
because unlike
™
achieves

Durability and performance for a constant*
supply of hot water!
1 Premium-Grade Glass
Lining provides superior protection
7
3
2
5
6
against leaks.
2 Dual Anode Rods provide the
highest quality defense against leaks.
3 Low-NOx Burner for “eco-friendly”
operation complies with Southern
California and Texas Low-NOx standards.
4 Hot and Cold Recirculating
Connections conveniently located
on side of unit for combination hot
water/space heating or hot water/
radiant floor heating applications.
5 PEXAN™Dip Tube for Long Life
made from a rugged cross-linked polymer
for superior resistance to thermal
oxidation, with “diffuser” design to
help reduce sediment buildup.
6 Fully Submerged Coil
Heat Exchanger with helical
configuration maximizes heat transfer
area for 96% thermal efficiency and
superior hot water output.
7 On/Off Control helps simplify
service and allows total shutdown during
vacation by cutting all power to the
water heater with the flick of a switch.
• Power Vent Flexibility uses 2˝, 3˝
or 4˝ PVC pipe and provides outstanding
flexibility in location of water heater
through use of long combined horizontal
and vertical vent runs.
• Easy Removal of Flue Gas
Condensate created by 96%
efficiency, using condensate elbow and
outlet supplied with water heater.
1
• Premium Electronic Control
provides precise temperature control due
4
to its state-of-the-art design. Mounted at
eye level, the easy-to-read LCD panel gives
both current operating modes as well as
performance history maintenance and
quick trouble shooting.
- iCOMM™ Compatible and
can be monitored from
remote locations.
Call 1.888.WATER02 for
more information.
* 4.3 GPM continuous flow, based on 65ºF inlet water temperature and 110ºF outlet water temperature.

RESIDENTIAL Premier
Easy to install • Connects to 1/2˝ gas line • Vents using standard PVC • Small footprint-22˝
Vent length in feet
2˝ PVC 45 feet • 3˝ PVC 128 feet • 4˝ PVC 128 feet • Vertical or horizontal
SPECIFICATIONS
MODEL
GP650YTPDT 50 164 129 100,000 66-3/4˝ 22˝
GP650YTPDT available in Natural Gas or Propane.
PERFORMANCE COMPARISON
MODEL
Premier®Power Vent DV
50-Gallon/100,000 BTU
Standard 40-Gallon/
40,000 BTU
Standard 50-Gallon/
40,000 BTU
Premier®Power-Vent
50-Gallon/76,000 BTU
®
Power-Vent DV
GALLON
CAPACITY
FIRST HOUR
DELIVERY
THERMAL
EFFICIENCY
96% 164 GALLONS
78% 71 GALLONS
78% 91 GALLONS
90% 127 GALLONS
RECOVERY-
GALLONS PER
HOUR AT 90ºF
FIRST HOUR
DELIVERY
BTU INPUT HEIGHT DIAMETER
COMMERCIAL Force 90+
Easy to install • Connects to 1/2˝ gas line • Vents using standard PVC • Small footprint-22˝
Vent length in feet
2˝ PVC 45 feet • 3˝ PVC 128 feet • 4˝ PVC 128 feet • Vertical or horizontal
SPECIFICATIONS
MODEL
SHE50100NE 50 100,000 116 66-3/4˝ 22˝
SHE50100NE available in Natural Gas or Propane.
PERFORMANCE COMPARISON
Force 90+™/
SHE50100NE
Typical 70-Gallon/
120,000 BTU
Commercial Gas Model
CAPACITY
MODEL
™
GALLON
BTU INPUT
THERMAL
EFFICIENCY
RECOVERY
100°F RISE
RECOVERY
GALLON
AT 100°F
96% 116 GALLONS
80% 115 GALLONS
HEIGHT DIAMETER
State Industries, Inc.
500 Tennessee Waltz Parkway
Ashland City, TN 37015
1-800-365-0024
www.statewaterheaters.com
Revised June 2011 © 2011 State Industries, Inc. Printed in U.S.A. SBGBR00108