State SBV-65-1OTS User Manual

RESIDENTIAL

RESIDENTIAL ELECTRIC DIRECT SOLAR

WATER HEATERS

SBV-65-10TS

State direct solar water heaters are designed for installation as a part of a direct (open loop) solar water heating system or for use with external heat exchangers in closed loop systems. These models provide storage for the hot water produced by the solar collectors and a supplementary electric heating element that maintains consistent water temperature during periods when solar energy is not available.

Multiple Connection Options for Installation Flex

• Side and top connections for open

loop systems or closed loop systems using an external heat exchanger

ibility

Electrical

• 4500 watt heating element - long

lasting low-watt density design spreads wattage over larger surface area to prolong element life and maximize efficiency

• Pre-wired for surface mount

temperature sensor (sensor supplied separately)

Tank Construction

• Glasslined Steel Tank – glasslining

protects against corrosion to maximize tank life

• 2-inch thick “Environmentally-

Friendly” Non-CFC Foam insulation (R16 Value) reduces standby heat loss

Anode Rod

• Aluminum anode rod with

stainless steel core protects tank against corrosion

CSA Certified and ASME RatedT&PReliefValve

Durable Tamper-Resistant Brass Drain Valv e

Compliance

• Units are UL and cUL listed to UL

174 Standard for Household Electric Storage Tank Water Heaters and CAN/CSA-C22.2 No. 110-M90; Complies with California legislation AB 1953 and Vermont legislation Act 193 that limits the lead content in plumbing fixtures that come into contact with drinking water to a maximum of 0.25%

Standard 6-Year Limited Tank and Parts Warranty

• Optional 10-year extension on tank

warranty when used in a residential application

s 3-year tank and 1-year parts

warranty when installed in a commercial application

s For complete warranty information

consult written warranty supplied with the product, online at www .statewaterheat ers.com

Eligible for a 30% federal

tax credit when installed as

part of a complete solar

water heating system.

For more information visit

www.statewaterheaters.com

For more information on Solar Water Heaters, contact:

State Water Heaters 500 Tennessee Waltz Parkway Ashland City, TN 37015

800-365-0024 Toll-free USA www.statewaterheaters.com

SRESS01111

RESIDENTIAL

RESIDENTIAL ELECTRIC DIRECT SOLAR WATER HEATERS

MODEL

NUMBER

SBV-65-1OTS 65 4500 21 1 16 60-1/4 22 59-1/4 20-1/2 7-1/2 152

*Limited warranty on tank and parts. See written warranty supplied with the water heater for complete details.** All solar loop and domestic water connections are 3/4” NPT. Top solar loop and domestic water connections are male NPT with factory-installed dielectric pipe nipples. Side solar loop connections are female NPT and are plugged from the factory. All dimensions are in inches.

FLOW

GALLON

CAPACITY

UPPER ACCESS

PANEL 4500WATT

HEATING ELEMENT

HOT SUPPLY FROM

SOLAR COLLECTORS

ELEMENT WATTAGE

(240 VOLT)

RECOVERY

90° RISE GALLONS

PER HOUR

NUMBER OF

ELEMENTS

INSULATION

VAL UE

HEIGHT

WATER

CONNECTION

COLD RETURN

TO SO LAR

COLLECTORS

JACKET

DIAMETER

HEIGHT TOP OF

TANK

OPTIONAL

SOLAR

IN/DOWN

HOT SUPPLY FROM

SOLAR COLLECTORS

T&P

LOCATI ON

ANODE

OPTIONAL

SOLAR

OUT/UP

APPROX.

SHIPPING

WEIGHT

(LBS)

FLOW

COLD RETURN

TO SOLAR

COLLECTORS

DRAIN

VALV E

LOWER ACCESS PANEL

TEMPERATURE SENSOR

MOUNTING STUD

Specification

Furnish and install, where indicated, in accordance with manufacturer’s instructions and in compliance with all rules and regulations of authorities having jurisdiction.

Storage tank(s) shall be State Model _________________________ as manufactured by State Water Heaters or equivalent. Storage tank(s) shall have a nominal storage capacity of __________ gallons, recovery of ___________ hydrostatic tested at 300 PSI having a working pressure of 150 PSI and shall have a Fused Ceramic Shield internally lined tank applied under pressure and fired at 1600° F allowing for maximum protection. Storage tank(s) shall be equipped with an approved pressure and temperature relief valve. The outer jacketing shall have a baked enamel finish . The tank shall be foam insulated with an EPA-approved, non-CFC material 2” in thickness. Storage tank(s) shall have a 6-year limited warranty against corrosion as outlined in the written warranty.

GPH at ________° F temperature rise and supplied with auxiliary heating elements rated at 4.5 KW, ________ volt. Storage tank(s) are

For complete information on limited warranties, consult written warranty or contact the State Customer Care Center at 1-800-365-0024.

State Industries, Inc., reserves the right to make product changes or improvements without prior notice.

For more information on Solar Water Heaters, contact:

State Water Heaters 500 Tennessee Waltz Parkway Ashland City, TN 37015

800-365-0024 Toll-free USA www.statewaterheaters.com