State SBV-65-10TS User Manual

STATE PREMIER®SOLAR WATER HEATING
THE BEST WAY UNDER THE SUN TO GET HOT WATER.
A COMPLETE, READY-TO-INSTALL PACKAGE THAT USES THE SUN
FOR UP TO 70% OF THE ENERGY REQUIRED FOR WATER HEATING.
PREMIER® Solar Water Heating Systems
PREMIER® is more than just a solar water heater - it’s the ultimate solar thermal
solution. High effi ciency ratings, long life and reduced carbon emissions are just a
few things that make it an irresistible choice for environmentally conscious
homeowners. Utility costs for water heating being reduced up to 70% make
PREMIER® a wise choice for everyone.
The time has never been better to invest in renewable energy.
Demonstrate your own green initiative with PREMIER® Solar.
®
THE PREMIER
16 solar water heating systems - one, two or three
collector confi gurations - collectors can be added for larger systems.
All solar water heating systems are SRCC certifi ed
OG-300.
ENERGY STAR
back cover
Proudly partnered with Chromagen™ to provide
top-of-the-line solar thermal collectors.
ADVANTAGE:
®
qualifi ed systems - refer to chart on
All solar thermal collectors are SRCC certifi ed
OG-100.
Standard and Deluxe solar system packages are
available.
All system packages include integrated solar pump
stations.
65, 80 & 120-gallon direct and indirect solar booster
tanks with 4500 watt back-up heating elements.
Single wall and double wall heat exchanger
systems.
Solar Energy Factor (SEF) ratings up to 10.1.
Provides up to 70% of the energy needed for
water heating directly from the sun.
Can produce the same amount of energy as
photo-voltaic solar collectors at 1/8th of the cost.
Eligible for Federal Tax Credit - 30% of the total
installed cost (no cap). May also be eligible for local and utility company rebates. Visit
www.statewaterheaters.com for more information.
Solar thermal collectors and solar pump stations
can be purchased individually or in bulk.
Full line of solar accessories including Solar
Pathfi nder™ site analysis unit and Pathfi nder Assistant Software, contractor installation kits, collector tilt kits and roof mounting kits for composite, fl at, tile, split seam and corrugated metal roof installations.
4-Year extended solar tank and 3-year extended
pump station warranty available.
Living Green, Saving Green
If you’ve been looking for a way to live a “greener” lifestyle, installing a PREMIER® solar water heating system in your home is a great way to start. Consider the facts: water heating accounts for 14% to 25% of the total energy consumed in a home. They are second only to air conditioning and heating systems in household energy consumption. With Solar Energy Factor (SEF) ratings up to 10.1, a PREMIER® solar water heating
How Do PREMIER® Systems Work?
PREMIER® Solar Water Heater Systems utilize energy from the sun to provide hot water. System components include: solar thermal collectors mounted on a south facing roof, solar loop piping, an integrated solar pump station, a solar loop expansion tank, a solar booster tank and a heat exchanger. The sun heats a transfer fl uid fl owing through the solar collectors. The
system can provide up to 70% of the energy needed for heating water directly from the sun. PREMIER® systems are OG-300 certifi ed by the Solar Rating and Certifi cation Corporation (SRCC), which means they are eligible for many state, local and utility rebate programs in addition to Federal tax credits. PREMIER® has a great impact on the environment and your wallet!
heat transfer fl uid is a mixture of distilled water and non-toxic propylene glycol to prevent freezing in the winter . The integrated pump station circulates the heat transfer fl uid through the solar loop piping to a heat exchanger where the heat energy is transferred to the water inside a solar booster tank.
1
2
3
4
5
6
All Solar Collectors Are Not Created Equal
Backed by over 40 years of expertise Chromagen™ has fi ne-tuned the design and manufacture of solar collectors to an art. Collectors are assembled using the highest quality materials and advanced techniques, which result in highly effi cient, durable products you can depend on for years to come.
• Optimal heat absorption and effi ciency.
• Riser tubes are laser welded to the absorber plate which ensures optimum heat transfer and permanent bond.
• Three insulation layers provide a cumulative thermal resistance value of R-8.
4
5 1 2 3
1. Low-iron patterned and tempered glazing provides superior strength, anti-glare surface and 91% solar transmittance.
2. Aluminum absorber plate with spectrally selective black coating provides more than 90% solar absorption and less than 40% IR emission for high performance even in cooler climates.
3. Rugged nylon glass fi ber moldings on all four corners protect collectors and adjacent property from damage during transport and installation.
4. 1-1/8 inch outside diameter (O.D.) copper sweat inlet/outlet connections.
5. Glass wool insulation layer
6 7
8 9 10
6. Black anodized extruded aluminum casing - interlocking construction assembly - requires no fasteners that loosen over time and allow moisture infi ltration.
7. Integrated aluminum foil insulation barrier.
8. Injected rigid Polyurethane foam insulation layer.
9. Durable black Polypropylene backsheet - resists punctures during transport and installation, resists corrosion for the life of the collectors.
10. Type M copper risers 5/8” and manifolds 1-1/8” are brazed together in a parallel tube confi guration
- ensuring optimal fl ow and a low pressure drop. Collectors may be installed in portrait or landscape or ientation.
Double Wall Pump Station
Integrated Solar Pump Stations
All-in-one integrated, insulated assembly features:
• Clean professional looking installation.
Standard Pump Station
• Saves time and money.
• Programmable electronic solar system control with advanced diagnostics and LCD display.
• Precise fl ow control - multipe speeds pumps, fl ow control valves and variable speed controls.
• Flow meter, temperature and pressure gauges.
• Solar loop pressure relief valve.
• Isolation valves, fi ll and drain valves, check valves and an air stripper.
• Standard pump stations are used with indirect solar booster tanks that have factory installed internal single wall coil-type heat exchangers.
• Double wall pump stations are equipped with plate-type stainless steel heat exchangers (double wall) and two circulation pumps; one for potable water and one for the heat transfer fl uid in the solar loop. They are used with direct solar booster tanks.
Solar System Packages and Solar Booster Tanks
Standard and Deluxe solar system packages are available, see the comparison table below. Use our Solar Sizing Guide to determine the number of solar collectors and solar booster tank needed. Order a system package that meets the sizing needs making sure double wall heat exchanger systems are ordered when required by local building codes. Order the required solar booster tank separately to complete the system.
Visit www.statewaterheaters.com for more information including; Specifi cation Sheets, Solar Sizing Guide with site analysis instructions, Online Rebate Locator, Installation Videos and Instruction Manuals.
INTEGRATED PREMIER® SYSTEMS INCLUDE:
Deluxe vs Standard - Included System Components
System Component Description
Solar Collector(s)
Integrated Solar Pump Station With Advanced Programmable Digital LCD Controller
Solar Loop Expansion Tank (Includes Bracket/Stainless Steel Flex Pipe)
Solar Loop Pressure Relief Valve
Thermostatic Mixing Valve
Propylene Glycol (DOWFROST™) 5-Gallons
Solar Loop Air Vent
Temperature Sensors (2) - Tank & Collector Outlet
Collector Spanner Mounting Hardware Kit (Stainless Steel/Aluminum)
Roof Flashing for solar loop piping supply line (1 - copper)
Roof Flashing for solar loop piping return line and sensor wire (1 - copper)
Roof Flashing Kit (Shingle Roof Mounting Kit) - 4 Per/Collector (iodized aluminum)
Temperature Sensor Control Wire 75' Roll
Collector Copper Sweat Fittings Kit
Flexible Pipe Insulation (UV Resistant/300°F) 6' x 1/2" tube (1)
Flexible Pipe Insulation (UV Resistant/300°F) 6' x 1" tube (1)
Tape, Stretch & Seal
Roof & Flashing Sealant
Standard Deluxe
XX
XX
XX
XX
XX
XX
XX
XX
XX
X
X
X
X
X
X
X
X
X
Model Number
SSX01-ACI-501 1
SSX02-ACI-202 2
SSX02-ACI-402 2
SSX03-ACI-203 3
SSX01-ACE-501 1
SSX02-ACE-202 2
SSX02-ACE-402 2
SSX03-ACE-203 3
Model Number
SSX01-ACI-501LC 1
SSX02-ACI-202LC 2
SSX02-ACI-402LC 2
SSX03-ACI-203LC 3
SSX01-ACE-501LC 1
SSX02-ACE-202LC 2
SSX02-ACE-402LC 2
SSX03-ACE-203LC 3
Number of Collectors
Number of Collectors
Model Number
SB6-80-SOTX
SB6-120-SOTX
Gallon
Capacity
76
108
STATE PREMIER®SOLAR WATER HEATER
Deluxe Solar System Packages - Solar Tanks Not Included
Solar Collector Model - Size (ft) Heat Exchanger Type
CR-140-AP - (4' x 10')
CR-110-AP - (3-1/2' x 7')
CR-130-AP - (4' x 8')
CR-110-AP - (3-1/2' x 7')
CR-140-AP - (4' x 10')
CR-110-AP - (3-1/2' x 7')
CR-130-AP - (4' x 8')
CR-110-AP - (3-1/2' x 7')
Single Wall Internal Coil
Single Wall Internal Coil
Single Wall Internal Coil
Single Wall Internal Coil
Double Wall External Plate
Double Wall External Plate
Double Wall External Plate
Double Wall External Plate
Solar Booster Tank Ordered Separately
(80 or 120-gallon)
SB6-80-SOTX or SB6-120-SOTX
SB6-80-SOTX or SB6-120-SOTX
SB6-80-SOTX or SB6-120-SOTX
SB6-80-SOTX or SB6-120-SOTX
SBV-82-10TS or SBV-120-1OTS
SBV-82-10TS or SBV-120-1OTS
SBV-82-10TS or SBV-120-1OTS
SBV-82-10TS or SBV-120-1OTS
Standard Solar System Packages - Solar Tanks Not Included
Solar Collector Model - Size (ft) Heat Exchanger Type
CR-140-AP - (4' x 10')
CR-110-AP - (3-1/2' x 7')
CR-130-AP - (4' x 8')
CR-110-AP - (3-1/2' x 7')
CR-140-AP - (4' x 10')
CR-110-AP - (3-1/2' x 7')
CR-130-AP - (4' x 8')
CR-110-AP - (3-1/2' x 7')
Single Wall Internal Coil
Single Wall Internal Coil
Single Wall Internal Coil
Single Wall Internal Coil
Double Wall External Plate
Double Wall External Plate
Double Wall External Plate
Double Wall External Plate
Solar Booster Tank Ordered Separately
(80 or 120-gallon)
SB6-80-SOTX or SB6-120-SOTX
SB6-80-SOTX or SB6-120-SOTX
SB6-80-SOTX or SB6-120-SOTX
SB6-80-SOTX or SB6-120-SOTX
SBV-82-10TS or SBV-120-1OTS
SBV-82-10TS or SBV-120-1OTS
SBV-82-10TS or SBV-120-1OTS
SBV-82-10TS or SBV-120-1OTS
Indirect Solar Booster Tanks
Energy
Factor
Heat Exchanger Included
N/A Single Wall Internal Coil 1 upper - 4500W 21 63-1/4" x 24" 257
N/A Single Wall Internal Coil 1 upper - 4500W 21 63-1/4" x 28" 365
Heating Element
(240 VAC Single Phase)
GPH Recovery @ 90°
Solar Energy Factor / ENERGY STAR® Qualified
80 Gallon Tank 120 Gallon Tank
2.2/Yes 1.9/Yes 564
3.0/Yes 2.3/Yes 542
5.3/Yes 3.3/Yes 586
10.1/Yes 4.9/Yes 635
1.8/Yes 1.7/No 590
2.2/Yes 2.1/Yes 560
3.0/Yes 2.8/Yes 614
4.3/Yes 3.5/Yes 661
Solar Energy Factor / ENERGY STAR® Qualified
80 Gallon Tank 120 Gallon Tank
2.2/Yes 1.9/Yes 556
3.0/Yes 2.3/Yes 534
5.3/Yes 3.3/Yes 578
10.1/Yes 4.9/Yes 627
1.8/Yes 1.7/No 582
2.2/Yes 2.1/Yes 560
3.0/Yes 2.8/Yes 606
4.3/Yes 3.5/Yes 653
F Rise
Dimensions
(inches)
Approx
Shipping
Weight (lbs)
Approx
Shipping
Weight (lbs)
Approx
Shipping
Weight (lbs)
Model Number
SBV-65-10TS
SBV-82-10TS
SBV-120-1OTS
Gallon
Capacity
65
80
119
Direct Solar Booster Tanks
Energy
Factor
Heat Exchanger Included
N/A No 1 upper - 4500W 21 59-1/4" x 20-1/2" 152
N/A No 1 upper - 4500W 21 63-1/4" x 24" 204
N/A No 1 upper - 4500W 21 63-1/4" x 28" 311
Heating Element
(240 VAC Single Phase)
GPH Recovery @ 90°
F Rise
Dimensions
(inches)
Weight (lbs)
Approx
Shipping
State Water Heaters 500 Tennessee Waltz Pkwy., Ashland City, TN 37015
800-365-0024 Toll-free USA statewaterheaters.com
SRVBR00110 Revised April 2012R
Loading...