Page 1
PREMIER®SOLAR ELECTRIC
PACKAGE SYSTEMS
The PREMIER® packaged system from State is the
latest advancement in solar water heating. With the
PREMIER
everything needed for a comprehensive solar system,
allowing for quick and easy specification and installation.
With Solar Energy Factor ratings up to 10.1 PREMIER
water heating systems can provide up to 70% of the energy
needed for water heating directly from the sun.
THE PREMIER® ADVANTAGE:
Standard and Deluxe solar system packages.
16 solar water heating systems - one, two or three collector
All systems are active closed loop systems using a mixture of
®
solar water heating system, State provides
®
solar
configurations collectors can be added for larger systems.
distilled water and non-toxic propylene glycol as a heat transfer
fluid in the solar loop to prevent freezing during winter.
RESIDENTIAL
All solar water heating systems are SRCC certified OG-300.
Highest quality solar thermal collectors from Chromagen
All solar thermal collectors are SRCC certified OG-100.
All system packages include integrated solar pump stations that
™
.
save time, money and provide a clean professional looking
installation.
80 & 120-gallon direct and indirect solar booster tanks with 4500
watt backup heating elements.
Single wall and double wall heat exchanger systems.
Solar Energy Factor (SEF) ratings up to 10.1.
Provides up to 70% of the energy needed for water heating directly
from the sun.
Can produce the same amount of energy as photovoltaic solar
collectors at 1/8th of the cost.
Full line of solar accessories including Solar Pathfinder™ site
analysis unit and Pathfinder Assistant Software, contractor
installation kits, collector tilt kits and roof mounting kits for
composite, flat, tile, split seam and corrugated metal roof
installations. Contact your local sales representative for more
information.
Low Lead Compliant
Eligible for Federal Tax Credit:
through 2016. 30% of
the total installed costs – no cap.
For more information, visit
www.statewaterheaters.com.
10-year limited warranty on collectors, 6-year limited warranty on
solar booster tanks, 2-year limited warranty on pump station, 1-year
limited warranty on miscellaneous parts. For complete information,
consult the included written warranty or contact State Water Heaters.
For more information on Solar Packaged Systems, contact:
State Water Heaters
500 Tennessee Waltz Parkway
Ashland City, TN 37015
800-365-0024 Toll-free USA
www.statewaterheaters.com
Proudly partnered with
Chromagen to provide solar
thermal collectors.
SRVSS00110 Revised March 2011
Page 2
RESIDENTIAL
SOLAR THERMAL COLLECTORS
Collectors are assembled using the highest quality materials and advanced techniques, which
result in highly efficient, durable products you can depend on for years to come.
Optimal heat absorption and efficiency.
Riser tubes are laser welded to the absorber
plate which ensures optimum heat transfer
and permanent bond.
Three insulation layers provide a cumulative
thermal resistance value of R-8.
4
5
1
2
3
1. Low-iron patterned and tempered glazing
provides superior strength, anti-glare
surface and 91% solar transmittance.
2. Aluminum absorber plate with spectrally
selective black coating provides more
than 90% solar absorption and less than 40%
IR emission for high performance even in
cooler climates.
3. Rugged nylon glass fiber moldings on all four
corners protect collectors and adjacent
property from damage during transport and
installation.
4. 1-1/8 inch outside diameter (O.D.) copper
sweat inlet/outlet connections.
5. Glass wool insulation layer
6
7
8
9
10
6. Black anodized extruded aluminum casing interlocking construction assembly - requires no
fasteners that loosen over time and allow
moisture infiltration.
7. Integrated aluminum foil insulation barrier.
8. Injected rigid Polyurethane foam insulation layer.
9. Durable black Polypropylene backsheet - resists
punctures during transport and installation,
resists corrosion for the life of the collectors.
10. Type M copper risers 5/8” and manifolds 1-1/8” are
brazed together in a parallel tube configuration
ensuring optimal flow and a low pressure drop.
Collectors may be installed in portrait or
landscape orientation.
For more information on Solar Packaged Systems, contact:
State Water Heaters
500 Tennessee Waltz Parkway
Ashland City, TN 37015
800-365-0024 Toll-free USA
www.statewaterheaters.com
SRVSS00110 Revised March 2011
Page 3
INTEGRATED SOLAR PUMP STATIONS
All-in-one integrated, insulated assembly features:
• Wall mounted for a clean professional looking installation.
• Saves time and money.
• Programmable electronic solar system control
with advanced diagnostics and LCD display.
• Precise flow control - multiple speed pumps, flow control
valves and variable speed controls.
• Flow meter, temperature and pressure gauges.
• Isolation valves, fill and drain valves, check valves and
air stripper.
• Solar loop pressure relief valve.
RESIDENTIAL
• Includes solar loop expansion tank with mounting
Standard Pump Station
bracket and stainless steel flex line.
• Standard pump stations are used with indirect
solar booster tanks that have factory installed
internal single wall coil-type heat exchangers.
• Double wall pump stations are equipped with plate-type stainless steel
heat exchangers (double wall) and are used with direct solar booster tanks.
Double Wall Pump Station
SOLAR SYSTEM PACKAGES AND SOLAR BOOSTER TANKS
Standard and Deluxe solar system packages are available, see the comparison table below.
INTEGRATED PREMIER® SYSTEMS INCLUDE:
Solar Collector(s)
Integrated Solar Pump Station With Advanced Programmable Digital LCD Controller
Solar Loop Expansion Tank (Includes Bracket/Stainless Steel Flex Pipe)
Solar Loop Pressure Relief Valve
Thermostatic Mixing Valve
Propylene Glycol (DOWFROST™) 5-Gallons
Solar Loop Air Vent
Temperature Sensors (2) - Tank & Collector Outlet
Collector Spanner Mounting Hardware Kit (Stainless Steel/Aluminum)
Roof Flashing for solar loop piping supply line (1 - copper)
Roof Flashing for solar loop piping return line and sensor wire (1 - copper)
Roof Flashing Kit (Shingle Roof Mounting Kit) - 4 Per/Collector (iodized aluminum)
Temperature Sensor Control Wire 75' Roll
Collector Copper Sweat Fittings Kit
Flexible Pipe Insulation (UV Resistant/300°F) 6' x 1/2" tube (1)
Flexible Pipe Insulation (UV Resistant/300°F) 6' x 1" tube (1)
Tape, Stretch & Seal
Roof & Flashing Sealant
Deluxe vs Standard - Included System Components
System Component Description
Standard Deluxe
XX
XX
XX
XX
XX
XX
XX
XX
XX
X
X
X
X
X
X
X
X
X
For more information on Solar Packaged Systems, contact:
State Water Heaters
500 Tennessee Waltz Parkway
Ashland City, TN 37015
800-365-0024 Toll-free USA
www.statewaterheaters.com
SRVSS00110 Revised March 2011
Page 4
RESIDENTIAL
SOLAR SYSTEM PACKAGES - SIZING & PLACING ORDERS
Use our Solar Sizing Guide to determine the number of solar collectors and solar booster tank needed. Order a
system package that meets the sizing needs making sure double wall heat exchanger systems are ordered when
required by local building codes. Order the required solar booster tank separately to complete the system.
Visit www.statewaterheaters.com for more information including; Specification Sheets, Solar Sizing Guide with site
analysis instructions, Online Rebate Locator, Installation Videos and Instruction Manuals.
Model Number
SSX01-ACI-501 1
SSX02-ACI-202 2
SSX02-ACI-402 2
SSX03-ACI-203 3
SSX01-ACE-501 1
SSX02-ACE-202 2
SSX02-ACE-402 2
SSX03-ACE-203 3
Model Number
SSX01-ACI-501LC 1
SSX02-ACI-202LC 2
SSX02-ACI-402LC 2
SSX03-ACI-203LC 3
SSX01-ACE-501LC 1
SSX02-ACE-202LC 2
SSX02-ACE-402LC 2
SSX03-ACE-203LC 3
Number of
Collectors
Number of
Collectors
Deluxe Solar System Packages - Solar Tanks Not Included
Solar Collector Model - Size (ft) Heat Exchanger Type
CR-140-AP - (4' x 10')
CR-110-AP - (3-1/2' x 7')
CR-130-AP - (4' x 8')
CR-110-AP - (3-1/2' x 7')
CR-140-AP - (4' x 10')
CR-110-AP - (3-1/2' x 7')
CR-130-AP - (4' x 8')
CR-110-AP - (3-1/2' x 7')
Standard Solar System Packages - Solar Tanks Not Included
Solar Collector Model - Size (ft) Heat Exchanger Type
CR-140-AP - (4' x 10')
CR-110-AP - (3-1/2' x 7')
CR-130-AP - (4' x 8')
CR-110-AP - (3-1/2' x 7')
CR-140-AP - (4' x 10')
CR-110-AP - (3-1/2' x 7')
CR-130-AP - (4' x 8')
CR-110-AP - (3-1/2' x 7')
Single Wall Internal Coil
Single Wall Internal Coil
Single Wall Internal Coil
Single Wall Internal Coil
Double Wall External Plate
Double Wall External Plate
Double Wall External Plate
Double Wall External Plate
Single Wall Internal Coil
Single Wall Internal Coil
Single Wall Internal Coil
Single Wall Internal Coil
Double Wall External Plate
Double Wall External Plate
Double Wall External Plate
Double Wall External Plate
Solar Booster Tank
Ordered Separately
(80 or 120-gallon)
SB6-80-SOTX or SB6-120-SOTX
SB6-80-SOTX or SB6-120-SOTX
SB6-80-SOTX or SB6-120-SOTX
SB6-80-SOTX or SB6-120-SOTX
SBV-82-10TS or SBV-120-1OTS
SBV-82-10TS or SBV-120-1OTS
SBV-82-10TS or SBV-120-1OTS
SBV-82-10TS or SBV-120-1OTS
Solar Booster Tank
Ordered Separately
(80 or 120-gallon)
SB6-80-SOTX or SB6-120-SOTX
SB6-80-SOTX or SB6-120-SOTX
SB6-80-SOTX or SB6-120-SOTX
SB6-80-SOTX or SB6-120-SOTX
SBV-82-10TS or SBV-120-1OTS
SBV-82-10TS or SBV-120-1OTS
SBV-82-10TS or SBV-120-1OTS
SBV-82-10TS or SBV-120-1OTS
Solar Energy Factor Approx
80 Gallon Tank 120 Gallon Tank
2.2 1.9 564
3.0 2.3 542
5.3 3.3 586
10.1 4.9 635
1.8 1.7 590
2.2 2.1 560
3.0 2.8 614
4.3 3.5 661
Solar Energy Factor Approx
80 Gallon Tank 120 Gallon Tank
2.2 1.9 556
3.0 2.3 534
5.3 3.3 578
10.1 4.9 627
1.8 1.7 582
2.2 2.1 560
3.0 2.8 606
4.3 3.5 653
Shipping
Weight (lbs)
Shipping
Weight (lbs)
SOLAR BOOSTER TANKS
Solar Booster Tanks are equipped with a factory installed CSA certified and ASME rated Temperature & Pressure Relief
Valve and a single (upper) 4500 watt / 240 volt backup heating element. Indirect tanks have a single wall internal coiltype heat exchanger. Direct tanks are open tanks used with double wall pump stations when local codes require
-
double wall heat exchangers for non-toxic propylene glycol systems.
Indirect Solar Booster Tanks
Model Number
SB6-80-SOTX
SB6-120-SOTX
Gallon
Capacity
76
108
Energy
Factor
N/A Single Wall Internal Coil 1 upper - 4500W 21 63
N/A Single Wall Internal Coil 1 upper - 4500W 21 63
Heat Exchanger Included
Heating Element
(240 VAC Single Phase)
GPH Recovery @ 90°
F Rise
Dimensions
(inches)
-1/4" x 24" 257
-1/4" x 28" 365
Approx
Shipping
Weight (lbs)
Direct Solar Booster Tanks
Model Number
SBV-82-10TS
SBV-120-1OTS
Gallon
Capacity
80
119
Energy
Factor
N/A No 1 upper - 4500W 21 63-1/4" x 24" 204
N/A No 1 upper - 4500W 21 63-1/4" x 28" 311
Heat Exchanger Included
Heating Element
(240 VAC Single Phase)
GPH Recovery @ 90°
F Rise
Dimensions
(inches)
Approx
Shipping
Weight (lbs)
CODES AND STANDARDS
Complies with current editions of: UL Standard for Household Electric Storage Tank Water Heaters, UL 174; Canadian
Standard for Construction and Test of Electric Storage Tank Water Heaters, CAN/CSA-C22.2 No. 110-M90; Packaged
Solar Domestic Hot Water Systems (Liquid-to-Liquid Heat Transfer For All-Season Use, F379.1-09; Packaged Solar
Domestic Hot Water Systems for Seasonal Use, F379.2-09 and ICC Codes and HUD Standards. Complies with California
legislation AB 1953 and Vermont legislation Act 193 that limits the lead content in plumbing fixtures that come into
contact with drinking water to a maximum of 0.25%.
For more information on Solar Packaged Systems, contact:
State Water Heaters
500 Tennessee Waltz Parkway
Ashland City, TN 37015
800-365-0024 Toll-free USA
www.statewaterheaters.com
SRVSS00110 Revised March 2011
Loading...