Star Trac IP-L5002 User Manual

IP-L5002

BICEPS CURL

OWNERS MANUAL -

INSTALLATION INSTRUCTIONS

Copyright 2011. Star Trac by CORE INDUSTRIES. All rights reserved, including those to reproduce this
book or parts thereof in any form without first obtaining written permission from Star Trac.

Every effort has been made to keep this information current; however, periodically, changes are made to the
information herein, and these changes will be incorporated into new editions of this publication. All product
names and logos are trademarks of their respective owners. Printed in the USA.

Page 2

TABLE OF CONTENTS

• SAFETY INSTRUCTIONS / WARNINGS

• WARNING LABLES WITH PART NUMBERS

• EXERCISE GUIDELINES

• MAINTENANCE AND SERVICE

• WARRANTY COVERAGE

• INSTALLATION INSTRUCTIONS

• HARDWARE

4

6

7

8

9

11

18

Page 3

Safety Instructions

LEVERAGE Safety Information and General Exercise Guidelines

Safety Information

Read the LEVERAGE Owner's Manual carefully before assembling, servicing or using the LEVERAGE.

! WARNING: Serious injury or death could occur if these

safety precautions are not observed:

1. Do not use the LEVERAGE in any way other than designed or intended by the
manufacturer. It is imperative that the LEVERAGE as well as any other STAR TRAC
STRENGTH equipment is used properly to avoid injury.

2. Keep hands, feet, head, limbs, fingers and hair clear at all times from moving parts to
avoid injury. Use appropriate positioning, speed and controlled movements.

3. DO NOT use any equipment that is damaged and or has worn or broken parts. Use only
replacement parts supplied by STAR TRAC.

4. DO NOT wear loose or dangling clothing while using the STAR TRAC equipment. Keep
away from all moving parts.

5. Obtain a medical exam prior to beginning an exercise program.

6. If at any time during exercise you feel faint, dizzy or experience pain, stop and consult
your physician.

7. Children must not be allowed near these machines. Teenagers must be supervised.

8. DO NOT attempt to fix a broken or jammed machine. Contact appropriate staff of Star
Trac Service.

9. Use the machine only for the intended use. Obtain instruction and DO NOT modify the
machines.

10. Load plates evenly and carefully to avoid tipping equipment and possible crushing
injuries. DO NOT exceed maximum load of 540 lbs (244.9 kgs) DO NOT exceed 270 lbs
(122.5 kgs) per side of loaded weight.

11. USE A SPOTTER for all activities.

12. MAINTAIN LABELS AND NAMEPLATES: Do not remove labels for any reason. They
contain important information. If unreadable or missing, contact STAR TRAC for a
replacement.

Page 4

13. SECURING EQUIPMENT: All STAR TRAC equipment MUST be secured to the floor to

service until the repair is made.

stabilize and eliminate rocking or tipping over. This must be performed by a licensed
contractor. DO NOT use the Weight equipment if it is not set up and located on a solid
level surface.

14. Make sure that each machine is set up and operated on a solid level surface. DO NOT
install equipment on an uneven surface.

15. MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to smooth operating
equipment as well as keeping your liability to a minimum. Inspect the STAR TRAC
equipment prior to use. DO NOT use if damaged or inoperable.

16. Ensure that any person (s) making adjustments or performing maintenance or repair of
any kind is qualified to do so.

17. Routinely inspect all fasteners that join attachments and framework tighten as needed to
maintain the integrity of the unit.

18. It is the purchaser's sole responsibility to properly instruct its end users and supervising
personnel as to the proper operating procedures of all STAR TRAC equipment. It is
recommended that the end users physical condition be evaluated prior to beginning any
exercise program.

19. Perform regular maintenance checks on the STAR TRAC equipment. Also, pay close
attention to all areas most susceptible to wear.

20. Keep a repair log of all maintenance activities.

21. Immediately replace worn or damaged components. If unable to immediately replace
worn or damaged components then remove the STAR TRAC piece of equipment from

22. Make sure that all users are properly trained on how to use the STAR TRAC equipment.

23. Make sure there is enough room for safe access and operation of the STAR TRAC
equipment.

24. Use only STAR TRAC supplied components to maintain/repair the STAR TRAC
equipment.

25. UNDERSTANDING EACH AND EVERY WARNING TO THE FULLEST IS IMPORTANT.
IF ANY OF THESE WARNINGS ARE UNCLEAR, ASK FOR CLARIFICATION FROM
STAR TRAC PERSONNEL.

NOTE: It is the sole responsibility of the user/owner or facility
operator to ensure that regular maintenance is performed.

Page 5

731-2991

Page 6