StarTech SVID2USB2NS User manual
Video Capture Cable with
Composite and S-Video Input
SVID2USB2NS
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
For the most up-to-date information, please visit: www.startech.com
Manual Revision: 05/08/2012
*actual product may vary from photos
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.
Instruction Manual
Table of Contents
Introduction ............................................................................................1
Installation ..............................................................................................2
Driver Installation ...................................................................................................................................... 2
Application Installation ........................................................................................................................... 3
Hardware Installation ..............................................................................................................................4
Operation ..................................................................................................................................................... 4
Option ......................................................................................................5
General .......................................................................................................................................................... 5
Encoder Property ......................................................................................................................................5
Troubleshooting .....................................................................................7
Specications ..........................................................................................9
Technical Support ..................................................................................10
Warranty Information ............................................................................10
Instruction Manual
i
Introduction
The SVID2USB2NS USB 2.0 S-Video and Composite video Capture Cable lets you
connect devices that output S-Video or Composite video to a computer, through an
available USB 2.0 port.
The perfect solution for bridging a computer and an S-Video or Composite video
source, the capture cable oers real time MPEG 1, MPEG 2 and MPEG 4 recording. Small
enough to t in the palm of your hand, the Capture Cable is a great solution for mobile
applications and integrates seamlessly with laptop and desktop computers.
If you require audio with your video capture please see StarTech.com’s S-Video to USB
2.0 Video Capture Cable(SVID2USB).
Backed by a StarTech.com 2-year warranty and free lifetime technical support.
Packaging Contents
• 1 x SVID2USB2NS video capture cable
• 1 x User Manual
• 1 x Driver CD
System Requirements
• USB 2.0 equipped computer
• Pentium 4 - 1GHz or above or equivalent AMD processor
• 128MB of RAM
• Microsoft Windows® 2000 SP4, XP SP2 or above, or Vista
Instruction Manual
1
Installation
USB 2. 0
connector
USB 2.0 connector: Connect to USB 2.0 port of your computer
S-Video input: S-Video input from external A/V device (e.g. VCR)
Composite video input: Composite video input from external A/V Device (e.g. VCR)
* If you want capture audio, please connect audio directly to Line-in of your Sound card.
Composite
input
S-Video
input
Driver Installation
Note: Do not connect SVID2USB2NS adapter to computer USB port before driver
installation!
Note: Please make sure your computer has USB2.0 port correctly installed and
functioning !! ( Please update your Windows® XP to at least SP2, or Windows® 2000 to
SP4, and updating the USB 2.0 host controller drivers before installation to make sure
the computer’s USB 2.0 is functioning correctly)
1. Please insert “Multimedia Installation Kit” CD-ROM into your CDROM drive; AutoRun
will play; (if AutoRun does not run, please go to “My Computer” and double click the
CD-ROM drive).
2. From the menu, please select the “GrabBeeX-light” product.
3. Please select “Device Driver” on the next screen.
* Note: In Vista, windows will get a pop up dialogue box. Choose “Allow” to continue
the installation.
4. Click “Next”.
5. Complete Setup Wizard.
6. Click “Finish”, then please restart the computer.
Instruction Manual
2
Loading...