Star Micronics TSP100IIILAN, TSP100IIIW, TSP100ECO, TSP100U/PUSB, TSP100GT Software Manual

Software Manual

Applicable Models

■ TSP100IIILAN

■ TSP100IIIW

■ TSP100ECO

■ TSP100GT

■ TSP100LAN

■ TSP100U/PUSB

Rev. 7.0

Getting Started

This software supports the following Windows operating systems.

・Windows 10 * 32-bit and 64-bit (except Windows 10 Mobile and Windows 10 IoT Core) ・Windows 8.1 * 32-bit and 64-bit (except WindowsRT 8.1) ・Windows 8 * 32-bit and 64-bit (except WindowsRT) ・Windows 7 32-bit and 64-bit

* Limitation for Windows 10 / 8.1 / 8

・

Star original Printer Dri ver Function (e.g. Logo Setting) can n ot be changed from "Modern UI". However, once the setting of it s f unct ion i s changed from "Desktop mode" , t hese function can be used on "Modern UI" as we ll.

・

USB Printer will not be appeared in [Device and Printer] if its po w er is of f .

・

Error status (e.g. Paper empty during printing) will not be sho wn in "Modern UI".

Software Manual

1. Installation and Uninstallation

To use the TSP100 futurePRNT product in a Windows environment, you need to install this printer driver in advance.

Notes:

1) If the TSP100GT (version 1.0a or earlier) or TSP100LAN (version 1.1a or earlier) driver utility application is installed, uninstall it before starting operations.

2) It is recommended that the driver utility application is updated by a user having the administrative right and having used the old version for the smooth data migration.

To install the driver utility application, follow the procedure shown below.

1.1. Installing futurePRNT Software

Notes:

futurePRNT 7.0 Software installation requires computer administrator privileges. Execute steps (1) to (12) before connecting the TSP100 futurePRNT.

<< TSP100III Series >>

1) Click "futurePRNT V*.*` FULL CD" on the download site (

app.html) to download the software.

2) Extract the archive you downloaded and run "Autorun.exe".

www.star-m.jp/tsp100iii-

1

Software Manual

<< Models supplied with CDs >>

(1) Insert the CD-ROM supplied with the TSP100 futurePRNT into the CD-ROM drive of your

computer.

(2) When the following window appears, click “Run Autorun.exe”.

 In Windows 8/8.1/10: Toast pop up will be appeared after CD-ROM is set.

After that, click [Run Autorun.exe].

2

Software Manual

(3) Then, the following window will appear.

Click “Installation” on the menu.

(4) Read this software license agreement carefully. If you agree to the terms of this license, click

"I Accept".

(5) The "User Account Control" window will appear. Click "Yes".

3

Software Manual

(6) Click “Next” to continue.

(7) Choose the user and then click “Next” to continue.

4

Software Manual

(8) Choose the “Typical” installation option to be sure that all of the TSP100 futurePRNT’s

options are installed and then click “Next” to continue.

(9) Click “Install” to begin the installation process.

5

Software Manual

(10) The files and programs are now being installed on the computer.

(11) At this point, all drivers and programs have been installed. Click “Finish” to close the wizard.

If the "Launch Star Cloud Services Web site" check box is checked (default), Star Cloud Services website will open after the installation wizard is finished.

6

Software Manual

(12) Click "Exit" to close the following window.

(13) The subsequent steps vary depending on the model you are using.

1.2 Adding a Printer (TSP100U/PU/GT/ECO)

1.3 Adding a Printer (TSP100LAN)

1.4 Adding a Printer (TSP100IIIW)

1.5 Adding a Printer (TSP100IIILAN)

7

Software Manual

1.2. Adding a Printer (TSP100U/PU/GT/ECO)

(1) Load roll paper in the TSP100 futurePRNT, and connect to a computer.

For information about how to load paper and connect to a computer, refer to the TSP100 futurePRNT hardware manual.

To view the hardware manual, select "Documents/SDK" on the “CD auto” menu, and click "Hardware Manual".

(2) Turn the TSP100 futurePRNT on.

With "Plug and Play", the computer detects a new hardware product and automatically

installs the printer driver.

Then, the following window will appear in the lower right of the Windows screen.

(3) In Control Panel, select “Devices and Printers”.

If "Star TSP100" appears, installation is completed.

8

Software Manual

1.3. Adding a Printer (TSP100LAN)

Prior to installation, use an Ethernet cable to connect the printer and an access point that can connect to the same network the PC that will be used for configuration is on. For details, see the

Notes:Printer addition requires computer's administrator privileges.

1.3.1. Printer LAN Settings

(1) Turn the TSP100 futurePRNT on.

(2) From the Windows Start menu, select “Programs (All Programs)” - “StarMicronics” - “Star

TSP100” - “Ethernet Setup Tool”.

Hardware manual.

(3) "User Account Control" window will appear. Click "Yes".

(4) If the "Windows Security Alert" screen is displayed, click [Allow access].

Notes: If you click [Cancel], you will not be able to search for the LAN printer.

9

Software Manual

(5) The TSP100LAN Ethernet Setup Tool screen is displayed.

If the printer you want to install is not listed in the LAN printer list, click [Discovery].

The factory network settings of the TSP100LAN printer are as follows. IP address: 0.0.0.0 (Unassigned) Subnet mask: 0.0.0.0 (Unassigned) Default gateway: 0.0.0.0 (Unassigned) Use DHCP: ENABLE (Selected)

If at least one of the following conditions applies, you will not be able to configure an IP address for

any printers (with factory default settings) which have no IP address assigned.

- Using F/W V.2.0 or older

- Using CD Vol. 5.4 or older

Before starting operations, specify the IP address for the printer, referring to "Chapter 6 Guideline

for Using Ethernet Environment".

10

Software Manual

(6) The TSP100LAN printer appears in the LAN printer list.

If multiple TSP100LAN printers are listed, you can identify the desired printer by referring to

the indicated MAC address.

If you wish to use the IP address assigned by the DHCP server, click the [Add printer queue]

button. Then proceed to Section

1.3.2, "Creating a Printer Queue", below.

If you wish to assign a fixed IP address for the printer, click [Change TCP/IP Setting].

Go to step 7

Go to section 1.3 .2.

You can find the printer's MAC address by printing a self-test. Hold the FEED button down as you turn the printer ON to run self-printing.

11

Software Manual

■ When the IP address cannot be obtained from the DHCP server :

When the DHCP server is not available, "Did not obtain" is displayed in the ‘IP address’ field for a printer that is not assigned to any IP address. To use such a printer, follow the steps below to specify the IP address.

1) Select a printer that is not assigned to any IP address, and then click [Configuration].

2) Enter a temporary IP address to assign, and then click [Apply].

3) The "Configuration" screen is displayed showing the entered temporary IP address in the IP address field. Continue setting up a fixed IP address.

12

Software Manual

(7) Uncheck "Dynamic (DHCP)", enter the IP address, subnet mask, and default gateway, and then

click [Apply].

Ask your network administrator about the static IP addr ess and subnet mask to use in the settings.

・If you enable “Multi Session”, it will be possible for terminals to get status from the printer

even when multiple terminals are connected simultaneously.

・If “Disconnect Message” is set to Enable, "NO HOST CONNECTION" will be printed when

the printer has been disconnected. This function is available in firmware version 110.110.100 or later of the printer.

・ If you click Initialize, all settings (including the password setting) return to their factory

defaults.

・ It is possible to set a fixed IP address from another segment. If you do so, however, the printer

will no longer be locatable by the Ethernet Setup Tool's LAN search.

13

Software Manual

(8) Click [Yes] on the screen asking to confirm application. The configuration is saved to the

printer and printed out.

(9) A message is displayed indicating that the configuration was applied. Click [OK], and then

proceed to Section 1.3.2, "Creating a Printer Queue."

Note: After the printer reset, it may take a short time (perhaps 20 seconds) for the printer

to be found again.

If the printer fails to reappear on the printer list after a noticeable amount of time

has passed, retry the search by clicking again on the [Discovery] button.

14

Software Manual

1.3.2. Creating a Printer Queue

(1) Select the printer to create a printer queue from the LAN printer list, and then click [Printer

Queue].

(2) The following dialog now appears. The dialog shows the queue name and port name for the

printer you are setting up. You can leave the names as they are, or you can change them to

anything you prefer. If you wish to use this printer as your default printer, check [Default

Printer]. If you want to output a test print after completing the settings, check [Print Test Page]. After making appropriate settings, click [Apply].

The following characters can be used in queue and port names.

Queue name: Uppercase and lowercase letters, numerals (0 to 9) , hyphens,

underscores, periods, spaces, and parentheses.

Port name: Uppercase and lowercase letters, numerals (0 t o 9) , hyphens,

underscores, and perio ds.

15

Software Manual

(3) Click [Yes] on the screen asking to confirm application. The printer queue is created. A

message is displayed indicating that setup is complete. Click [OK].

(4) In Control Panel, select “Devices and Printers”.

If the Star TSP100LAN printer is found in the window, installation is completed.

16

Software Manual

1.4. Adding a Printer (TSP100IIIW)

This manual describes how to connect the printer using WPS.

If you are using Windows 7, you can also connect over an Ad-Hoc network. For details, see the

manual (Setup - Connect Tablet/PC).

Notes:Printer addition requires computer's administrator privileges.

1.4.1. Printer LAN Settings

(1) Turn the TSP100 futurePRNT on.

(2) Use WPS to connect the printer to the network.

Set your wireless access point to wait for a WPS connection, and then hold down the PAIR button on the rear of the printer until the printer LED (blue) blinks. When the WPS connection is made, the printer LED (blue) stops blinking and stays lit.

For details on WPS connections, see the TSP100IIIW Online manual (Setup -

Connecting with a Tablet/PC)

(3) From the Windows Start menu, select “Programs (All Programs)” - “StarMicronics” - “Star

TSP100” - “Ethernet Setup Tool”.

.

Online

(4) "User Account Control" window will appear. Click "Yes".

17

Software Manual

(5) If the "Windows Security Alert" screen is displayed, click [Allow access].

Notes: If you click [Cancel], you will not be able to search for the LAN printer.

(6) The TSP100LAN Ethernet Setup Tool screen is displayed.

If the printer you want to install is not listed in the LAN printer list, click [Discovery].

The factory network settings of the TSP100IIIW printer are as follows. Network Mode: Ad-Hoc * IP address: 0.0.0.0 (Unassigned) Subnet mask: 0.0.0.0 (Unassigned) Default gateway: 0.0.0.0 (Unassigned) Use DHCP: ENABLE (Selected)

* The printer automatically enters the infrastructure mode when it connects over WPS.

18

Software Manual

(7) The TSP100 Ethernet printer appears in the LAN printer list.

If multiple TSP100IIIW printers are listed, click [Check connection] to check whether you can

communicate with the printer. The connected printer's LED (blue) will blink.

If you wish to use the IP address assigned by the DHCP server, then proceed to Section

1.4.2,

"Creating a Printer Queue", below.

If you wish to assign a fixed IP address for the printer, click [Configuration].

Go to step 8

Go to section 1.4 .2.

19

Software Manual

■ When the IP address cannot be obtained from the DHCP server :

When the DHCP server is not available, "Did not obtain" is displayed in the ‘IP address’ field for a printer that is not assigned to any IP address. To use such a printer, follow the steps below to specify the IP address.

1) Select a printer that is not assigned to any IP address, and then click [Configuration].

2) Enter a temporary IP address to assign, and then click [Apply].

3) Connect to the printer using the temporarily assigned IP address. The Web Configuration screen is displayed. see step (8) and the subsequent steps to complete the setting of a fixed IP address.

20

Software Manual

(8) Open [Login] from the menu displayed on the left side of the setting screen, or the menu button

displayed on the upper left, and login with: Login name: root / password: [Changed password or the default password (public)].

The default login name and password are as follows:

Login name: ro ot Password: publi c

(9) The following message is displayed when you are using the default password. Select [OK] to

change the password or [Cancel] to not change the password. If [OK] is selected, a screen to change the password will open. After changing the password,

return to the following step.

21

Software Manual

(10) From the menu displayed on the left side of the setting screen or the menu button displayed on

the upper left, open [IP Parameters] , select “Static” and enter the IP Address, Subnet Mask, and tap [Submit].

Ask your network administrator about the static IP addr ess and subnet mask to use in the settings.

(11) From the menu of the menu button on the upper left, open [Save], select

"Save"→"Configuration Printing"→"Restart device", and tap [Execute]. The settings are saved to the printer and printed out.

(12) The settings are saved to the printer and printed out. Then proceed to Section 1.4.2, "Creating a

Printer Queue."

Note: After the printer reset, it may take a short time (perhaps 20 seconds) for the printer

to be found again.

If the printer fails to reappear on the printer list after a noticeable amount of time

has passed, retry the search by clicking again on the [Discovery] button.

22

Software Manual

1.4.2. Creating a Printer Queue

(1) Select the printer to create a printer queue from the LAN printer list, and then click [Printer

Queue].

(2) The following dialog now appears. The dialog shows the queue name and port name for the

printer you are setting up. You can leave the names as they are, or you can change them to

anything you prefer. If you wish to use this printer as your default printer, check [Default

Printer]. If you want to output a test print after completing the settings, check [Print Test Page]. After making appropriate settings, click [Apply].

The following characters can be used in queue and port names.

Queue name: Uppercase and lowercase letters, numerals (0 to 9) , hyphens,

underscores, periods, spaces, and parentheses.

Port name: Uppercase and lowercase letters, numerals (0 t o 9) , hyphens,

underscores, and perio ds.

23

Software Manual

(3) Click [Yes] on the screen asking to confirm application. The printer queue is created. A

message is displayed indicating that setup is complete. Click [OK].

(4) In Control Panel, select “Devices and Printers”.

If the Star TSP100IIIW printer is found in the window, installation is completed.

24

Software Manual

1.5. Adding a Printer (TSP100IIILAN)

Prior to installation, use an Ethernet cable to connect the printer and an access point that can connect to the same network the PC that will be used for configuration is on. For details, see the

manual (Setup – Connect Tablet/PC).

Notes:Printer addition requires computer's administrator privileges.

1.5.1. Printer LAN Settings

(1) Turn the TSP100 futurePRNT on.

(2) From the Windows Start menu, select “Programs (All Programs)” - “StarMicronics” - “Star

TSP100” - “Ethernet Setup Tool”.

Online hardware

(3) "User Account Control" window will appear. Click "Yes".

(4) If the "Windows Security Alert" screen is displayed, click [Allow access].

Notes: If you click [Cancel], you will not be able to search for the LAN printer.

25

Star Micronics TSP100IIILAN, TSP100IIIW, TSP100ECO, TSP100U/PUSB, TSP100GT Software Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Contents

Getting Started

1. Installation and Uninstallation

1.1. Installing futurePRNT Software

1.2. Adding a Printer (TSP100U/PU/GT/ECO)

1.3. Adding a Printer (TSP100LAN)

1.4. Adding a Printer (TSP100IIIW)

1.5. Adding a Printer (TSP100IIILAN)