Star Manufacturing PSC14D Installation Manual

®

®

®

®

®

SPLIT LID TABLE TOP TWO

SIDED GRILL

MODEL

PSC14D

Installation and

Operation

Instructions

SK2678 Rev. E 1/28/2015

SAFETY SYMBOL

These symbols are intended to alert the user to the presence of
important operating and maintenance instructions in the manual
accompanying the appliance.

RETAIN THIS MANUAL FOR FUTURE REFERENCE

NOTICE

Using any part other than genuine Star factory supplied parts relieves the
manufacturer of all liability.

Star reserves the right to change speci cations and product design without

notice. Such revisions do not entitle the buyer to corresponding changes,
improvements, additions or replacements for previously purchased
equipment.

Due to periodic changes in designs, methods, procedures, policies and

regulations, the speci cations contained in this sheet are subject to change
without notice. While Star International Holdings Inc., Company exercises
good faith efforts to provide information that is accurate, we are not

responsible for errors or omissions in information provided or conclusions

reached as a result of using the speci cations. By using the information
provided, the user assumes all risks in connection with such use.

MAINTENANCE AND REPAIRS

Contact your local authorized service agent for service or required maintenance.

Please record the model number, serial number, voltage and purchase date in the area below and have it ready when

you call to ensure a faster service.

Authorized Service Agent Listing

Model No.

Reference the listing provided with the unit

Serial No.

Voltage

Purchase Date

or

for an updated listing go to:

Website: www.star-mfg.com
E-mail [e-mail]

Service Help Desk

Business 8:00 am to 4:30 p.m. Central Standard Time
Hours:

Telephone: [phone]

Fax: [phone]

E-mail [e-mail]

[e-mail]

[e-mail]

Website: www.star-mfg.com

Mailing Address: Star International Holdings Inc., Company

10 Sunnen Drive
St. Louis, MO 63143
U.S.A

2

SK2678: PSC14D Tabletop Split Lid Two-Sided Grill

GENERAL SPECIFICATIONS

29.5”

16.4”

Electrical Specications

Model Voltage Watts Amps

PSC14DDT 120 2300 19.2

PSC14DK 120 2300 19.2

PSC14DK-UK 230 2110 9.2

PSC14DK-CUL 120 2300 19.2

PSC14DKL-CUL 120 2300 19.2

120 2300 19.2

PSC14DTB

PSC14DTB-CUL 120 2300 19.2

PSC14DTB-JPN 200 1600 8.0

208 1725 8.3

230 2110 9.2

240 2300 9.6

22.625”

IL2678

SK2678: PSC14D Tabletop Split Lid Two-Sided Grill

CAUTION

WARNING

GENERAL INSTALLATION DATA

This equipment is designed and sold for commercial use only by personnel trained and experienced

in its operation and is not sold for consumer use in and around the home nor for use directly by the
general public in food service locations.

Before using your new equipment, read and understand all the instructions & labels associated with
the unit prior to putting it into operation. Make sure all people associated with its use understand the
units operation & safety before they use the unit.

All shipping containers should be checked for freight damage both visible and concealed. This

unit has been tested and carefully packaged to insure delivery of your unit in perfect condition. If

equipment is received in damaged condition, either apparent or concealed, a claim must be made

with the delivering carrier.

Concealed damage or loss - if damage or loss is not apparent until after equipment is unpacked, a
request for inspection of concealed damage must be made with carrier within 15 days. Be certain to
retain all contents plus external and internal packaging materials for inspection. The carrier will make
an inspection and will supply necessary claim forms.

INSTALLATION

1. This two sided grill is equipped for the voltage shown on the nameplate. It will operate on alternating
current only, however the specied voltage must be applied.

2. 120 volt units must be plugged into a dedicated 120 VAC line with a 20 Amp receptacle.
230-240 volt units do not require a dedicated 240 VAC circuit with a 15 Amp receptacle.

DO NOT CONNECT THE UNIT TO ANY TYPE OF VOLTAGE OTHER THAN THAT ON THE
NAMEPLATE. DOING SO WILL DAMAGE THE UNIT AND VOID THE WARRANTY.

INITIAL START UP

Level unit using the adjustable feet under the unit (approximately 1/2" adjustment).

Before using the unit for the rst time, wipe down the exterior and toasting area with a damp cloth.
Take to a well ventilated area and heat for approximately 30 minutes. The grill may emit a small
amount of smoke as the cooking surfaces reach 450°F (232°C). Do not be alarmed, as the smoke is
caused by oils associated with the manufacturing process and will stop when the burn off is complete.
Brush off any debris from the toasting surface.

SEASONING THE COOKING SURFACES (NON CHROME SURFACES)
FIRST TIME SEASONING

Follow your company/corporate guidelines for seasoning cooking surfaces. or

1. Bring the grill to 300°F (149°C) and leave it on while doing the next two steps.

2. Brush the cooking surfaces with a SALT-FREE release agent.
If using an aerosol agent, rst apply into a cup and then brush onto cooking surface.

3. Let sit for 20 minutes, and then wipe clean using a warm damp cloth.

DAILY SEASONING

The grill should not require much seasoning while in use. In most cases, brush a light coating of a
SALT-FREE baking release agent in the morning and occasionally throughout the day will be enough
to prevent any sticking. It is not necessary to brush before grilling each item.

PRESET TIME AND TEMPERATURE

If adjustments are required, please refer to the time or temperature programming section in this

manual.

°F/°C CONVERSION

To change the temperature display from °F to °C or from °C to °F, hold the TEMP button while the
unit is turned off. While holding the TEMP button, turn the unit on. The display will be the changed

temperature mode. To change back, repeat the procedure.

SK2678: PSC14D Tabletop Split Lid Two-Sided Grill