St ar |
|
|
Manufact uring |
|
Installation |
International Inc. |
|
|
|
and |
|
|
|
|
10 Sunnen Drive |
|
Operating |
St. Louis, MO 63143 |
|
Instructions |
Phone: (314) 781-2777 |
|
|
Fax: (314) 781-3636 |
|
2M-Z0258 Rev. -- 5/23/96 |
|
||
|
|
|
|
|
|
PASS-TH RU SN EEZ E GUARD
MOD ELS
12SGA-PT, 25SGA-PT, 40SGA-PT, 45SGA-PT, and 75SGA-PT
1
SAFETY SYMBOL
These symbols are intended to alert the user to the presence of importantoperatingandmaintenanceinstructionsinthemanual accompanying the appliance.
RETAIN THIS MANUAL FOR FUTURE REFERENCE
NOTICE
Using any part other than genuine Star factory supplied parts relieves the manufacturer of all liability.
Star reserves the right to change specifi cations and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
Due to periodic changes in designs, methods, procedures, policies and regulations, the specifi cations contained in this sheet are subject to change without notice. While Star Manufacturing exercises good faith efforts to provide information that is accurate, we are not responsible for errors or omissions in information provided or conclusions reached as a result of using the specifi cations. By using the information provided, the user assumes all risks in connection with such use.
MAINTENANCE AND REPAIRS
Contact your local authorized service agent for service or required maintenance. Please record the model number, serial number, voltage and purchase date in the area below and have it ready when you call to ensure a faster service.
Model No.
Serial No.
Voltage
Purchase Date
Authorized Service Agent
Reference the listing provided with the unit
or
for an updated listing go to:
Website: |
www.star-mfg.com |
Service@star-mfg.com |
|
Telephone: |
(800) 807-9054 Local (314) 781-2777 |
The Star Service Help Desk
Business |
8:00 am to 4:30 p.m. Central Standard Time |
|
Hours: |
|
|
Telephone: |
(800) 807-9054 |
Local (314) 781-2777 |
Fax: |
(800) 396-2677 |
Local (314) 781-2714 |
Parts@star-mfg.com |
||
|
Service@star-mfg.com |
|
|
Warranty@star-mfg.com |
|
Website: |
www.star-mfg.com |
Mailing Address: Star Manufacturing International Inc.
10 Sunnen Drive
St. Louis, MO 63143
U.S.A
2
CAUTION
This equipment is designed and sold for commercial use only by personnel trained and experienced in its operation and is not sold for consumer use in and around the home nor for use directly by the general public in food service locations. For equipment to be used by the general public, please contact the factory.
IN STALLATION
1.Remove (2) sheet machine screw s from the right end panel on the hot dog roller grill. (See Figure 1 on draw ing SK1414.) Repeat prior instructions for the left end panel. (See Figure 1 on draw ing SK1414.)
2.Place sneeze guard on roller grill as show n in Figure 2 on draw ing SK1414. Secure the sneeze guard to the right end panel on the roller grill using
(2) thumb screw sP/N 2C-Y1546. (See Figure 2 on draw ing SK1414.) Repeat prior instructions for left end panel. (See Figure 2 on draw ing SK1414.)
CLEAN IN G
Turn the roller grill off and allow the sneeze guard to cool before attempting to remove it from the roller grill. After removal, w ash the sneeze guard w ith amild soap or detergent and w arm w ater using a clean sponge or a soft cloth. Rinse w ell w ith clean w ater. Dry thoroughly w ith a chamois or a moist cellulose sponge to prevent w ater spots. Do not scrub or use brushes because it can cause scratches and minor abrasions. Do not use abrasive or highly alkaline cleaners. N ever scrape the sneeze guard w ith squeegees, razor blades, or other sharp instruments. Some compatible cleaners for the sneeze guard are: Joy, Palmolive liquid, Top Job, and Windex w ith AmmoniaD. Adherence to regular and proper cleaning proceduresisrecommended to preserve appearance.
GEN ERAL OPERATIN G PROCEDURES
The pass-thru sneeze guard is used to protect the perishable foods from foreign airborne contaminates. The pass-thru sneeze guard is designed to attach to the side panels on the hot dog roller grill w ith (4) thumb screw s (2 per side). This design feature allow s the sneeze guard to be easily removable w ithout the use of any tools.
CAU TION
D O N OT U SE SH ARP OBJECTS ON TH E SN EEZ EGUARD SURFACE; SCRATCHES WILL VOID TH E WARRAN TY. N EVER USE STEEL WOOL OR ABRASIVE CLEAN ERS ON TH E SN EEZ E GUARD AS TH IS WILL DAMAGE TH E FIN ISH .
MAIN TEN AN CE AN D REPAIRS
Contact the factory, aservice representative or alocal service company for service or required maintenance.
RETAIN THIS MAN UAL FO RFUTURE REFEREN CE.
PART N O . 2M-Z0258 |
Rev. -- 5/23/96 |
3