CHEESE
MELTER
MODEL
524SB, 524SBA 536SB, 536SBA
Installation and Operation Instructions
2M-Z7369 Rev. C 7/10/06
536SBA
1
SAFETY SYMBOL
These symbols are intended to alert the user to the presence of importantoperatingandmaintenanceinstructionsinthemanual accompanying the appliance.
RETAIN THIS MANUAL FOR FUTURE REFERENCE
NOTICE
Using any part other than genuine Star factory supplied parts relieves the manufacturer of all liability.
Star reserves the right to change specifi cations and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
Due to periodic changes in designs, methods, procedures, policies and regulations, the specifi cations contained in this sheet are subject to change without notice. While Star Manufacturing exercises good faith efforts to provide information that is accurate, we are not responsible for errors or omissions in information provided or conclusions reached as a result of using the specifi cations. By using the information provided, the user assumes all risks in connection with such use.
MAINTENANCE AND REPAIRS
Contact your local authorized service agent for service or required maintenance. Please record the model number, serial number, voltage and purchase date in the area below and have it ready when you call to ensure a faster service.
Model No.
Serial No.
Voltage
Purchase Date
Authorized Service Agent
Reference the listing provided with the unit
or
for an updated listing go to:
Website: |
www.star-mfg.com |
Service@star-mfg.com |
|
Telephone: |
(800) 807-9054 Local (314) 781-2777 |
The Star Service Help Desk
Business |
8:00 am to 4:30 p.m. Central Standard Time |
|
Hours: |
|
|
Telephone: |
(800) 807-9054 |
Local (314) 781-2777 |
Fax: |
(800) 396-2677 |
Local (314) 781-2714 |
Parts@star-mfg.com |
||
|
Service@star-mfg.com |
|
|
Warranty@star-mfg.com |
|
Website: |
www.star-mfg.com |
Mailing Address: Star Manufacturing International Inc.
10 Sunnen Drive
St. Louis, MO 63143
U.S.A
2 2
SPECIFICATIONS
524SBA-208V, 524SBA-240V
Rating Connection: 3,120 Watts, 208 Volts, 50/60 Hz, 15 Amps 3,240 Watts, 240 Volts, 50/60 Hz, 13.5 Amps NEMA 6-30 plug with 6-foot cord
Approximate Weight:Installed - 62 Lbs (28.15 kg), Shipping - 75 Lbs (34 kg)
Dimensions: |
Width: |
30.0 in. (76.20 cm) |
|
Height: |
19.1 in. (48.51 cm) |
|
Depth: |
17.2 in. (43.56 cm) |
|
|
|
536SBA-208V, 536SBA-240V |
|
|
Rating Connection: |
4,097 Watts, 208 Volts, 50/60 Hz, 19.7 Amps |
|
|
4,104 Watts, 240 Volts, 50/60 Hz, 17.1 Amps |
|
|
NEMA 6-30 plug with 6-foot cord |
Approximate Weight:Installed - 87 Lbs (39.5 kg), Shipping - 99 Lbs (45.0 kg)
Dimensions: |
Width: |
42.0 in. (106.7 cm) |
|
Height: |
19.1 in. (48.51 cm) |
|
Depth: |
17.2 in. (43.56 cm) |
|
|
|
3
GENERAL INFORMATION DATA
CAUTION
This equipment is designed and sold for commercial use only by personnel trained and experienced in its operation and is not sold for consumer use in and around the home nor for use directly by the general public in food service locations.
Before using your new equipment, read and understand all the instructions & labels associated with the unit prior to putting it into operation. Make sure all people associated with its use understand the units operation & safety before they use the unit.
All shipping containers should be checked for freight damage both visible and concealed. This unit has been tested and carefully packaged to insure delivery of your unit in perfect condition. If equipment is received in damaged condition, either apparent or concealed, a claim must be made with the delivering carrier.
Concealed damage or loss - if damage or loss is not apparent until after equipment is unpacked, a request for inspection of concealed damage must be made with carrier within 15 days. Be certain to retain all contents plus external and internal packaging materials for inspection. The carrier will make an inspection and will supply necessary claim forms.
UNPACKING AND INSPECTION
Unpack the cheese melter cheese melter for damage. that handled the shipment. prior to heating.
and all components from the container. Thoroughly inspect the If damage is discovered, immediately initiate a claim with the carrier Be sure to remove all the paper protection and packing material
ASSEMBLY AND INSTALLATION
The cheese melters are shipped with adjustable feet detached. Install the feet by placing the cheese melter on its back and screw the feet into the threaded holes on the bottom of the unit. Contact the factory for alternate installation methods.
BACK OF UNIT
IL1113
LEGS SCREWS INTO
WELD NUT ON BOTTOM
OF UNIT FOR COUNTER
MOUNTING
CAUTION
DO NOT INSTALL WITHOUT FEET PROVIDED.
WARNING
This appliance is equipped with a three-prong (grounding) plug for your protection against shock hazard and should be plugged directly into a properly grounded threeprong receptacle. Do not cut or remove the grounding prong from this plug.
WARNING
IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE, OR MAINTENANCE CAN CAUSE PROPERTY DAMAGE, INJURY, OR DEATH. READ ALL INSTRUCTIONS THOROUGHLY BEFORE INSTALLING OR SERVICING THIS EQUIPMENT.
The cheese melter is equipped with a thermostat that interrupts power to the heating elements if the temperature in the control compartment is excessive. Do not obstruct the ventilation openings on the side panel. These provide cooling air for the controls. If airfl ow to the fan is obstructed, the thermostat will need to be reset by pressing the reset button on the bottom of the control compartment.
4