Star Manufacturing 20RGDKC Installation Manual

Star

IL1482a

Front

Bracket

Note: Assemble Divider Frame Assembly upside down

Rear

Bracket

Acorn Nuts (8)

Right

Side Bracket

Left

Side Bracket

SK2502

IL2503

Dividers

Manufacturing International Inc.

10 Sunnen Dr. St. Louis, MO 63143

Accessory

Instructions

Phone: (314) 678-6303 FAX: (314) 781-2714

Roller Grill Divider Kit

Protected by U.S. Pat 7,334,517

Divider Installation (C Series)

These instructions are to add merchandiser dividers to your Star Roller Grill. The grill does not need disassembling, but does need to have the power turned off and allowed to cool. Once completed, the Dividers will keep your product separated, and the dividers will not touch the rollers.

Tools Required: Small Wrench for tightening acorn nuts.

UNPLUG UNIT BEFORE

CAUTION

Left Side Bracket 1 Right Side Bracket 1 Front Divider Bracket 1 Rear Divider Bracket 1 Dividers 4 Acorn Nuts 8

PROCEEDING.

Accessory Contents

Description Qty

2M-Z11569 Rev.C 7/3/2012

ASSEMBLY INSTRUCTIONS

1. You will be assembling this divider kit upside down. Lay the 4 brackets out on

the oor as shown here to the right.

2. The slots on the front and rear brackets should be facing each other.

3. Attach the side brackets to the front and rear brackets by securing with the acorn nuts provided, as shown here.

4. Turn frame assembly over and set in place on your Star Roller grill.

5. Install the 4 dividers provided into the slots, adjust the spacing between the dividers so

your product can t.