Star Manufacturing 15PDC-A Parts List

PASTRY

DISPLAY CABINET

MODEL

15PDC-A

PRETZEL DISPLAY

MODEL

16PD-A

Installation and

Operation

15PDC-A

Instructions

2M-Y4633 Rev. K 9/20/06

1

SAFETY SYMBOL

Using any part other than genuine Star factory supplied parts relieves the
manufacturer of all liability.

Star reserves the right to change specifi cations and product design without
notice. Such revisions do not entitle the buyer to corresponding changes,
improvements, additions or replacements for previously purchased
equipment.

Due to periodic changes in designs, methods, procedures, policies and
regulations, the specifi cations contained in this sheet are subject to change
without notice. While Star Manufacturing exercises good faith efforts to provide
information that is accurate, we are not responsible for errors or omissions
in information provided or conclusions reached as a result of using the
specifi cations. By using the information provided, the user assumes all risks in
connection with such use.

These symbols are intended to alert the user to the presence of
important operating and maintenance instructions in the manual
accompanying the appliance.

RETAIN THIS MANUAL FOR FUTURE REFERENCE

NOTICE

MAINTENANCE AND REPAIRS

Contact your local authorized service agent for service or required maintenance. Please record the model
number, serial number, voltage and purchase date in the area below and have it ready when you call to

ensure a faster service.

Model No.

Serial No.

Voltage

Purchase Date

Authorized Service Agent

Reference the listing provided with the unit

or

for an updated listing go to:

Website: www.star-mfg.com
E-mail [e-mail]
Telephone: [phone] Local [phone]

The Star Service Help Desk

Business 8:00 am to 4:30 p.m. Central Standard Time
Hours:

Telephone: [phone] Local [phone]

Fax: [phone] Local [phone]

E-mail [e-mail]

[e-mail]
[e-mail]

Website: www.star-mfg.com

Mailing Address: Star Manufacturing International Inc.

10 Sunnen Drive
St. Louis, MO 63143
U.S.A

2

2

CAUTION

This equipment is designed and sold for commercial use only by personnel trained and
experienced in its operation and is not sold for consumer use in and around the home nor for
use directly by the general public in food service locations. For equipment to be used by the
general public, please contact Star Manufacturing, Technical Services.

All shipping containers should be checked for freight damage both visible and concealed.
This unit has been tested and carefully packaged to insure delivery of your unit in perfect
condition. If equipment is received in damaged condition, either apparent or concealed, a
claim must be made with the delivering carrier.

Concealed damage or loss - if damage or loss is not apparent until after equipment is unpacked,
a request for inspection of concealed damage must be made with carrier within 15 days.
Be certain to retain all contents plus external and internal packaging materials for inspection.
The carrier will make an inspection and will supply necessary claim forms.

NOTE: This page contains two models with different design specifi cations.

GENERAL OPERATING INSTRUCTIONS

15PDC-A

This model requires no electrical hookup.

This pastry display will help impulse sales
when placed on either a front or back
counter.

CABINET

RACK

SHELF

ASSEMBLY

Place shelves on rack as shown in this
illustration, and place rack into cabinet.

16PD-A

VOLTAGE

This display is equipped for operation on
120V, 60 Hertz AC single phase service
only.

Do not connect to any other type of current or the machine will be seriously damaged.
The stainless steel pretzel holder will accommodate up to 36 pretzels and keep them warm

with the heat from the two 85 watt refl ector fl ood lamps.
Turn ON the lead-in cord switch to activate both the lamps and the rotation of the pretzel

holder.

IL1055

ASSEMBLY

The doorknob must be attached as shown,
with a Phillips screwdriver.

CLEANING

For retaining the high luster on the stainless steel, use a non-abrasive standard stainless steel
cleaner. Use a damp cloth and warm, mild soap solution to clean the glass and plastic surfaces.
The rack and shelf assembly on the 15PDC-A and the holder on the 16PD-A are easily removed
and may also be cleaned using a damp cloth and a warm, mild soap solution.

),

MAINTENANCE AND REPAIRS

Contact the factory, a service representative, or a local service company for service or required
maintenance.

3