Page 1
DISPLAY
MERCHANDISERS
MODEL
12MC
15MC
18MCP
Installation and
Operation
Instructions
2M-Z5378 Rev. I 2/23/2007
1
Page 2
SAFETY SYMBOL
Using any part other than genuine Star factory supplied parts relieves the
manufacturer of all liability.
Star reserves the right to change specifi cations and product design without
notice. Such revisions do not entitle the buyer to corresponding changes,
improvements, additions or replacements for previously purchased
equipment.
Due to periodic changes in designs, methods, procedures, policies and
regulations, the specifi cations contained in this sheet are subject to change
without notice. While Star Manufacturing exercises good faith efforts to provide
information that is accurate, we are not responsible for errors or omissions
in information provided or conclusions reached as a result of using the
specifi cations. By using the information provided, the user assumes all risks in
connection with such use.
These symbols are intended to alert the user to the presence of
important operating and maintenance instructions in the manual
accompanying the appliance.
RETAIN THIS MANUAL FOR FUTURE REFERENCE
NOTICE
MAINTENANCE AND REPAIRS
Contact your local authorized service agent for service or required maintenance. Please record the model
number, serial number, voltage and purchase date in the area below and have it ready when you call to
ensure a faster service.
Model No.
Serial No.
Voltage
Purchase Date
Authorized Service Agent
Reference the listing provided with the unit
or
for an updated listing go to:
Website: www.star-mfg.com
E-mail Service@star-mfg.com
Telephone: (800) 807-9054 Local (314) 781-2777
The Star Service Help Desk
Business 8:00 am to 4:30 p.m. Central Standard Time
Hours:
Telephone: (800) 807-9054 Local (314) 781-2777
Fax: (800) 396-2677 Local (314) 781-2714
E-mail Parts@star-mfg.com
Service@star-mfg.com
Warranty@star-mfg.com
Website: www.star-mfg.com
Mailing Address: Star Manufacturing International Inc.
10 Sunnen Drive
St. Louis, MO 63143
U.S.A
2
2
Page 3
SPECIFICATIONS
12MC-120V
Capacity: Twelve 4" diameter cookies, Fourteen 7 ounce breakfast burritos
Electrical: 120V, 60H, single phase, 475 Watts, 3.96 Amps
Dimensions: 12-1/2" W x 13-5/8" D x 18-7/8" H
(31.8 cm x 34.7 cm x 47.9 cm)
Weight: Approximately 23.5 lbs. (10.66kg)
12MCPT-120V
Capacity: Twelve 4" diameter cookies, Fourteen 7 ounce breakfast burritos
Electrical: 120V, 60H, single phase, 475 Watts, 3.96 Amps
Dimensions: 12-1/2" W x 14-3/4" D x 18-7/8" H
(31.8 cm x 37.5 cm x 47.9 cm)
Weight: Approximately 25 lbs. (11.34kg)
15MC-120V, 8D-15MCMR-120V
Capacity: Twenty-seven 4" diameter cookies, Twenty-one 7 ounce breakfast burritos
Electrical: 120V, 60H, single phase, 625 Watts, 5.21 Amps
Dimensions: 15" W x 16-1/8" D x 24-7/8" H
(38.1 cm x 40.9 cm x 63.2 cm)
Weight: Approximately 35.5 lbs. (16.10kg)
15MCPT-120V
Capacity: Twenty-seven 4" diameter cookies, Twenty-one 7 ounce breakfast burritos
Electrical: 120V, 60H, single phase, 625 Watts, 5.21 Amps
Dimensions: 15" W x 17-1/4" D x 24-7/8" H
(38.1 cm x 43.8 cm x 63.2 cm)
Weight: Approximately 37 lbs. (16.78kg)
15MCN-120V
Capacity: 30 Corndogs
Electrical: 120V, 60H, single phase, 625 Watts, 5.21 Amps
Dimensions: 15" W x 16-1/8" D x 24-7/8" H
(38.1 cm x 40.9 cm x 63.2 cm)
Weight: Approximately 35.5 lbs. (16.10kg)
18MCP-120V
Capacity: Two 16" pizzas
Electrical: 120V, 60H, single phase, 250 Watts, 2.08 Amps
Dimensions: 18-1/2" W x 19-5/8" D x 24-7/8" H
(47 cm x 49.8 cm x 63.2 cm)
Weight: Approximately 42 lbs. (19.05kg)
18MCPT-120V
Capacity: Two 16" pizzas
Electrical: 120V, 60H, single phase, 250 Watts, 2.08 Amps
Dimensions: 18-1/2" W x 20-3/4" D x 24-7/8" H
(47 cm x 52.7 cm x 63.2 cm)
Weight: Approximately 44 lbs. (19.96kg)
3
Page 4
12MC-230V
Capacity: Twelve 4" diameter cookies, Fourteen 7 ounce breakfast burritos
Electrical: 230V, 50/60H, single phase, 475 Watts, 2.07 Amps
Dimensions: 12-1/2" W x 13-5/8" D x 18-7/8" H
(31.8 cm x 34.7 cm x 47.9 cm)
Weight: Approximately 23.5 lbs. (10.66kg)
12MCPT-230V
Capacity: Twelve 4" diameter cookies, Fourteen 7 ounce breakfast burritos
Electrical: 230V, 50/60H, single phase, 475 Watts, 2.07 Amps
Dimensions: 12-1/2" W x 14-3/4" D x 18-7/8" H
(31.8 cm x 37.5 cm x 47.9 cm)
Weight: Approximately 25 lbs. (11.34kg)
15MC-230V
Capacity: Twenty-seven 4" diameter cookies, Twenty-one 7 ounce breakfast burritos
Electrical: 230V, 50/60H, single phase, 625 Watts, 2.72 Amps
Dimensions: 15" W x 16-1/8" D x 24-7/8" H
(38.1 cm x 40.9 cm x 63.2 cm)
Weight: Approximately 35.5 lbs. (16.10kg)
15MCPT-230V
Capacity: Twenty-seven 4" diameter cookies, Twenty-one 7 ounce breakfast burritos
Electrical: 230V, 50/60H, single phase, 625 Watts, 2.72 Amps
Dimensions: 15" W x 17-1/4" D x 24-7/8" H
(38.1 cm x 43.8 cm x 63.2 cm)
Weight: Approximately 37 lbs. (16.78kg)
18MCP-230V
Capacity: Two 16" pizzas
Electrical: 230V, 50/60H, single phase, 250 Watts, 1.04 Amps
Dimensions: 18-1/2" W x 19-5/8" D x 24-7/8" H
(47 cm x 49.8 cm x 63.2 cm)
Weight: Approximately 42 lbs. (19.05kg)
18MCPT-230V
Capacity: Two 16" pizzas
Electrical: 230V, 50/60H, single phase, 250 Watts, 1.04 Amps
Dimensions: 18-1/2" W x 20-3/4" D x 24-7/8" H
(47 cm x 52.7 cm x 63.2 cm)
Weight: Approximately 44 lbs. (19.96kg)
4
Page 5
RECOMMENDED DIAL SETTINGS
DIAL SETTING FOR DESIRED TEMPERATURE (APPROXIMATE)
All settings are recommendations only and could vary depending on product preparation, cooking
time, and internal food temperature.
12MC, 12MCPT 15MC, 15MCPT
Low - 1 105°F Low - 1 105°F
2 - 3 110°F 2 115°F
4 130°F 3 120°F
5 170°F 4 130°F
High 200°F 5 150°F
High 195°F
5
Page 6
RECOMMENDED DIAL SETTINGS
DIAL SETTING FOR DESIRED TEMPERATURE (APPROXIMATE)
All settings are recommendations only and could vary depending on product preparation, cooking
time, and internal food temperature.
Base Upper Shelf
Low 110°F Low 135°F
1 110°F 1 140°F
2 130°F 2 150°F
3 145°F 3 160°F
4 170°F 4 185°F
5 215°F 5 215°F
High 220°F High 235°F
6
Page 7
GENERAL INSTALLATION DATA
CAUTION
This equipment is designed and sold for commercial use only by personnel trained and
experienced in its operation and is not sold for consumer use in and around the home nor
for use directly by the general public in food service locations.
Before using your new equipment, read and understand all the instructions & labels
associated with the unit prior to putting it into operation. Make sure all people associated
with its use understand the units operation & safety before they use the unit.
All shipping containers should be checked for freight damage both visible and concealed.
This unit has been tested and carefully packaged to insure delivery of your unit in perfect
condition. If equipment is received in damaged condition, either apparent or concealed, a
claim must be made with the delivering carrier.
Concealed damage or loss - if damage or loss is not apparent until after equipment is
unpacked, a request for inspection of concealed damage must be made with carrier within
15 days. Be certain to retain all contents plus external and internal packaging materials for
inspection. The carrier will make an inspection and will supply necessary claim forms.
INSTALLATION
This merchandising cabinet is equipped for the voltage and wattage indicated on the nameplate
mounted on the back of the unit and is designed for use on alternating current (AC) only.
CORN DOG SHELF INSTALLATION
To Ensure shelf works properly follow these
steps.
1. Place the front (customer side) shelf rod
on the bottom setting.
2. Place the rear (door side) shelf rod on the
third setting.
3. Install the crumb tray so it sits on the shelf
rods.
4. Position the corn dog shelf so the alignment
hole faces the door (as shown in Fig 1).
5. This confi guration will allow the corn dogs
to stand straight up.
DOOR SIDE
SHELF ROD
FIG. 1 CORNDOG SHELF INSTALLATION
DO NOT CONNECT TO DIRECT CURRENT (DC).
WARNING
ALIGNMENT HOLE
CORNDOG SHELF
CRUMB TRAY
CUSTOMER SIDE
SHELF ROD
IL1030
7
Page 8
GENERAL OPERATING INSTRUCTIONS
1. Ensure cabinet is plugged into the proper voltage receptacle prior to turning on.
2. Pre-heat cabinet with the door closed until the desired temperature setting is reached
(15-60 minutes depending on the temperature setting and the merchandiser model).
3. Set temperature according to the tables on pages 5 and 6.
4. Load product onto shelves.
5. Monitor cabinet temperature via the thermometer.
Check food product temperature with an approved food thermometer.
CAUTION
DO NOT BLOCK VENT HOLES ON TOP OF THE CABINET (12MC/15MC)
CLEANING INSTRUCTIONS
1. Disconnect electrical cord before cleaning the cabinet.
2. To maintain fi nish and shine of unit, wipe daily with a damp cloth and mild soap.
Do not use harsh detergents or scouring pads.
3. Daily cleaning of inside glass, bottom pan and racking system with a damp cloth is
recommended.
4. Daily clean shelves and crumb trays (some models) using mild detergent.
MAINTENANCE AND REPAIRS
Contact the factory , a service representative or a local service company for service or required
maintenance.
8
Page 9
Visit our Website at: www.star-mfg.com Email: service@star-mfg.com
THOROUGHLY INSPECT YOUR UNIT ON ARRIVAL
This unit has been tested for proper operation before leaving our plant to insure delivery of your unit in perfect condition. However, there are instances in
which the unit may be damaged in transit. In the event you discover any type of damage to your product upon receipt, you must immediately contact the
transportation company who delivered the item to you and initiate your claim with same. If this procedure is not followed, it may affect the warranty
status of the unit.
LIMITED EQUIPMENT WARRANTY
All workmanship and material in Star products have a one (1) year limited warranty on parts & labor in the United States and Canada. Such warranty is
limited to the original purchaser only and shall be effective from the date the equipment is placed in service. Star's obligation under this warranty is limited
to the repair of defects without charge, by the factory authorized service agency or one of its sub-agencies. Models that are considered portable (see below)
should be taken to the closest Star service agency, transportation prepaid.
> Star will not assume any responsibility for loss of revenue.
> On all shipments outside the United States and Canada, see International Warranty.
* The warranty period for the JetStar six (6) ounce & Super JetStar eight (8) ounce series popcorn machines is two (2) years.
* The warranty period for the Chrome-Max Griddles is five (5) years on the griddle surface. See detailed warranty provided with unit.
* The warranty period for Teflon/Dura-Tec coatings is one year under normal use and reasonable care. This warranty does not apply if damage occurs to
Teflon/Dura-Tec coatings from improper cleaning, maintenance, use of metallic utensils, or abrasive cleaners. This warranty does not apply to the
“non-stick” properties of such materials.
> This warranty does not apply to "Special Products" but to regular catalog items only. Star's warranty on "Special Products" is six (6) months on parts
and ninety (90) days on labor.
> This warranty does not apply to any item that is disassembled or tampered with for any purpose other than repair by a Star Authorized Service Center or
the Service Center's sub-agency.
> This warranty does not apply if damage occurs from improper installation, misuse, wrong voltage, wrong gas or operated contrary to the Installation and
Operating instructions.
> This warranty is not valid on Conveyor Ovens unless a "start-up/check-out" has been performed by a Factory Authorized Technician.
PARTS WARRANTY
Parts that are sold to repair out of warranty equipment are warranted for ninety (90) days. The part only is warranted. Labor to replace the part is
chargeable to the customer.
SERVICES NOT COVERED BY WARRANTY
1. Travel time and mileage rendered beyond the 50 mile radius limit
2. Mileage and travel time on portable equipment (see below)
3. Labor to replace such items that can be replaced easily during a daily cleaning
routine, ie; removable kettles on fryers, knobs, grease drawers on griddles, etc.
4. Installation of equipment
5. Damages due to improper installation
6. Damages from abuse or misuse
7. Operated contrary to the Operating and Installation Instructions
8. Cleaning of equipment
9. Seasoning of griddle plates
PORTABLE EQUIPMENT
Star will not honor service bills that include travel time and mileage charges for servicing any products considered "Portable" including items listed below.
These products should be taken to the Service Agency for repair:
* The Model 510FD Fryer.
* The Model J4R, 4 oz. Popcorn Machine.
* The Model 518CMA & 526CMA Cheese Melter.
* The Model 12MC & 15MC & 18MCP Hot Food Merchandisers.
* The Model 12NCPW & 15NCPW Nacho Chip/Popcorn Warmer.
* All Hot Dog Equipment except Roller Grills & Drawer Bun Warmers.
* All Nacho Cheese Warmers except Model 11WLA Series Nacho Cheese Warmer.
* All Condiment Dispensers except the Model HPDE, & SPDE Series Dispenser.
* All Specialty Food Warmers except Model 130R, 11RW Series, and 11WSA Series.
* All QCS/RCS Series Toasters except Model QCS3 & RCS3 Series.
The foregoing warranty is in lieu of any and all other warranties expressed or implied and constitutes the entire warranty.
FOR ASSISTANCE
Should you need any assistance regarding the Operation or Maintenance of any Star equipment; write, phone, fax or email our Service Department.
In all correspondence mention the Model number and the Serial number of your unit, and the voltage or type of gas you are using.
10. Voltage conversions
11. Gas conversions
12. Pilot light adjustment
13. Miscellaneous adjustments
14. Thermostat calibration and by-pass adjustment
15. Resetting of circuit breakers or safety controls or reset buttons
16 . Replacement of bulbs
17. Replacement of fuses
18 . Repair of damage created during transit, delivery, &
installation OR created by acts of God
ALL:
* Pop-Up Toasters
* Butter Dispensers
* Pretzel Merchandisers
* Pastry Display Cabinets
* Nacho Chip Merchandisers
* Accessories of any kind
* Sneeze Guards
* Pizza Ovens
* Heat Lamps
* Pumps
Part# 2M-4497-2 05/06 RB
9
Page 10
CORD SET
WHT
BLK
WHT
D
BLK
L2L1
H2H1
INFINITE
CONTROL
BLK
E
A
SWITCH
STAR MANUFACTURING INTERNATIONAL INC.
SK1887 01/25/02
HI-LIMIT
THERMOSTAT
WHT
C
BLK
I
HEATING
ELEMENT
WHT
G
H
BLK
LAMP
BLOWER
WHT
TERMINAL
BLOCK
F
WHT
C
BLK
B
10
12MC/15MC WIRE DIAGRAM
THIS DRAWING CONTAINS INFORMATION CONFIDENTIAL TO STAR MFG. INT'L. INC.
NO REPRODUCTION OR DISCLOSURE OF ITS CONTENTS IS PERMITTED.
Page 11
LAMP
H1 H2
L2L1 L1 L2
H1 H2
CORD SET
K
RIGHT FRONT LEFT FRONT
L
F
C
I
J
D
A
B
E
LAMP
WHT
BLK
SHELF ELEMENT
BOTTOM ELEMENT
CORNER POST CORNER POST
SHELF
TOP
BASE
CONTROL
TOP
CONTROL
SWITCH
STAR MANUFACTURING INTERNATIONAL INC.
SK1886 01/25/02
18MCP WIRE DIAGRAM
THIS DRAWING CONTAINS INFORMATION CONFIDENTIAL TO STAR MFG. INT'L. INC.
NO REPRODUCTION OR DISCLOSURE OF ITS CONTENTS IS PERMITTED.
11
Page 12
CORNDOGS
NOT INCLUDED
1
3
2
4
5
23
15
25
MODEL: 15MCN
21
22
42
41
23
24
25
17
12
7
8
9
6
10
11
13
18
19
14
15
16
26
27
OFF
28
ON
29
37
38
SOME ITEMS ARE INCLUDED FOR
ILLUSTRATIVE PURPOSES ONLY AND IN
CERTAIN INSTANCES MAY NOT BE AVAILABLE
MODEL: 12MC/MCPT, 15MC/MCPT/MCN
30
20
31
32
33
34
35
36
39
40
STAR MANUFACTURING INTERNATIONAL, INC.
SK1893 REV. B 9/30/05
12
Page 13
PARTS LIST February 23, 2007 Rev I
12MC, 12MCPT, 15MC, 15MCN, 15MCPT, 15MCMR
MODEL
Number
Part
Number
Per
Unit
Description and Model Designation
Key
Number
1 2L-Z5064 1 Top Cover 12MC, 12MCPT
2L-Z4287 1 Top Cover 15MC, 15MCPT
2 2M-Z5113 1 Top Front Graphic 12MC, 12MCPT
2M-Z4577 1 Top Front Graphic 15MC, 15MCPT
3 2U-Z5349 1 Blower Assembly - 120V
2U-Z5511 1 Blower Assembly - 230V
4 2E-Z4597 1 Terminal Block
5 D5-Z5073 1 Heating Duct 12MC, 12MCPT
D5-Z5072 1 Heating Duct 15MC, 15MCPT
6 2T-Z0622 1 Thermstat High Limit 12MC, 12MCPT, 15MC, 15MCPT
7 D5-Z5074 1 Lamp Housing
8 2S-Y9118 1 Lamp 100W - 120V
2S-Z0630 1 Lamp 100W - 230V
9 2E-Y9184 1 Socket
10 2N-Z5294 1 Element 350W - 120V 12MC, 12MCPT
2N-Z5512 1 Element 350W - 230V 12MC, 12MCPT
2N-Z0337 1 Element 500W - 120V 15MC, 15MCPT
2N-Z0793 1 Element 500W - 230V 15MC, 15MCPT
11 D5-Z5069 1 Top Liner 12MC, 12MCPT
D5-Z4288 1 Top Liner 15MC, 15MCPT
12 D5-Z4528 1/2 Hinge Bracket 12 / 15
13 2T-Z0613 1 Thermometer
14 2R-Z4937 1 Magnetic Catch 12MC
2R-Z4937 2 Magnetic Catch 12MCPT
2R-Z4937 1 Magnetic Catch 15MC
2R-Z4937 2 Magnetic Catch 15MCPT
15 D5-Z5317 4 Shelf Rod 12MC, 12MCPT
D5-Z5316 6 Shelf Rod 15MC, 15MCPT
D5-Z5316 2 Shelf Rod 15MCN
16 D5-Z5101 2 Shelf 12MC, 12MCPT
D5-Z4286 3 Shelf 15MC, 15MCPT
17 2I-Z5065 3 Corner Post 12MC, 12MCPT
2I-Z4532 3 Corner Post 15MC, 15MCPT
18 2I-Z5116 6/4 Glass Channel Horizontal 12MC / 12MCPT
2I-Z4581 6/4 Glass Channel Horizontal 15MC / 15MCPT
19 2I-Z5115 8 Glass Channel Vertical 12MC, 12MCPT
2I-Z4580 8 Glass Channel Vertical 15MC, 15MCPT
20 2Q-Z5066 3/2 Side Glass 12MC / 12MCPT
2Q-Z4579 3/2 Side Glass 15MC / 15MCPT
21 D5-MC0013 1/2 Assembly, Door 12MC / 12MCPT
D5-MC0003 1/2 Assembly, Door 15MC / 15MCPT
22 2C-Z5427 1 Nylon Spacer
23 D5-Z5117 2 Shelf Bracket Left 12MC, 12MCPT
D5-Z4650 2 Shelf Bracket Left 15MC, 15MCPT
24 ----- 1 Nameplate
25 D5-Z5246 2 Shelf Bracket Right 12MC, 12MCPT
D5-Z5245 2 Shelf Bracket Right 15MC, 15MCPT
26 2M-Z6646 1 Door Graphic 15MCMR
27 2M-Z2718 1 Star Emblem 12MC
2M-Z2718 2 Star Emblem 12MCPT
2M-Z2718 1 Star Emblem 15MC
2M-Z2718 2 Star Emblem 15MCPT
28 2R-Z5128 1 Knob Infi nite Control
IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE 1
INCLUDE MODEL AND SERIAL NUMBER OF 2
Some items are included for illustrative purposes only and in certain instances may not be available.
Star Manufacturing International, Inc.
13
Page 14
PARTS LIST February 23, 2007 Rev I
12MC, 12MCPT, 15MC, 15MCN, 15MCPT, 15MCMR
MODEL
Number
Key
Number
29 2E-Y6144 1 Switch
30 2J-Z2195 1 Infi nite Control - 120V
2J-Z2192 1 Infi nite Control - 230V
31 D5-Z5070 1 Bottom Liner 12MC
D5-Z5260 1 Bottom Liner 12MCPT
D5-Z4651 1 Bottom Liner 15MC
D5-Z5261 1 Bottom Liner 15MCPT
32 2I-Z5118 1 Corner Post-Wire 12MC, 12MCPT
2I-Z5110 1 Corner Post-Wire 15MC, 15MCPT
33 2K-Y3240 1 Strain Relief Bushing
34 D5-MC0014 1 Cordset Assembly - 120V
D5-MC0016 1 Cordset Assembly - 230V
35 D5-Z5355 1 Stiffener 12MCPT
D5-Z5356 1 Stiffener 15MCPT
36 D5-Z5364 1 Stiffener Right
37 D5-Z5363 1 Stiffener Left
38 D5-Z5076 1 Access Panel
39 D5-Z5071 1 Bottom Cover 12MC
D5-Z5257 1 Bottom Cover 12MCPT
D5-Z4289 1 Bottom Cover 15MC
D5-Z5258 1 Bottom Cover 15MCPT
40 2I-Z0057 4 Foot
41 D5-Z9141 1 Crumb Tray 15MCN
42 D5-Z9142 1 Corn Dog Shelf 15MCN
Part
Number
Per
Unit
Description and Model Number
IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE 2
INCLUDE MODEL AND SERIAL NUMBER OF 2
Some items are included for illustrative purposes only and in certain instances may not be available.
Star Manufacturing International, Inc.
14
Page 15
1
3
2
4
0
9
0
8
0
70
20
0
0
8
6
1
0
0
6
5
1
0
40
4
1
C
0
°
2
1
0
0°
0
0
2
1
E
R
F
U
°
T
A
R
E
P
M
SE
E
U
T
M
U
M
XI
A
M
6
38
5
8
7
9
10
11
14
12
13
18
15
16
19
21
22
R
OFF
ON
17
20
23
27
25
24
26
28
29
32
30
31
33
34
36
SOME ITEMS ARE INCLUDED FOR
ILLUSTRATIVE PURPOSES ONLY AND IN
CERTAIN INSTANCES MAY NOT BE AVAILABLE
MODEL: 18MCP/MCPT
35
37
STAR MANUFACTURING INTERNATIONAL, INC.
SK1894 REV. --
15
Page 16
PARTS LIST March 7, 2006 Rev H
18MCP , 18MCPT
MODEL
Number
Key
Number
1 2L-Z4526 1 Top Cover
2 2M-Z4541 1 Top Front Graphic
3 D5-Z4527 1 Top Liner 18MCP
4 D5-Z4528 1/2 Hinge Bracket 18MCP / 18MCPT
5 2R-Z4937 1/2 Magnetic Catch 18MCP / 18MCPT
6 D5-Z4529 1 Shelf Top
7 D5-Z5373 2 Insulation
8 D5-Z8818 1 Foil Element-Stripped 65W - 120V
D5-Z8841 1 Foil Element-Stripped 65W - 230V
9 2I-Z4552 6/4 Glass Channel Horizontal 18MCP / 18MCPT
10 2I-Z4580 8 Glass Channel Vertical
11 2I-Z5217 2 Corner Post
12 D5-Z4530 1 Shelf Bottom
13 D5-Z5263 2 Lamp Housing
14 2S-Z4554 2 Light Bulb 60W 120V Tubular
2S-Z5572 2 Light Bulb 60W 230V Tubular
15 2E-Y9184 2 Socket
16 ----- 1 Nameplate
17 2Q-Z4534 3/2 Side Glass 18MCP / 18MCPT
18 2E-Z4597 1 Terminal Block
19 2J-Z2195 2 Infi nite Control - 120V
2J-Z2192 2 Infi nite Control - 230V
20 D5-Z4681 1 Bottom Liner 18MCP
D5-Z5262 1 Bottom Liner 18MCPT
21 2M-Z2718 1/2 Star Emblem 18MCP / 18MCPT
22 2R-Z5128 2 Knob Infi nite Control
23 2E-Y6144 1 Switch
24 2N-Z8817 1 Foil Element 65W - 120V
2N-Z8840 1 Foil Element 65W - 230V
25 2M-Z5365 1 Decal-Lower
26 2M-Z5366 1 Decal-Upper
27 D5-MC0008 1/2 Assembly, Door 18MCP / 18MCPT
28 2C-Z5427 1/2 Nylon Spacer 18MCP / 18MCPT
29 D5-Z5357 1 Stiffener
30 2I-Z5218 2 Corner Post-Wire
31 D5-MC0014 1 Cordset Assembly - 120V
D5-MC0016 1 Cordset Assembly - 230V
32 D5-Z5363 1 Stiffener Left
33 D5-Z5364 1 Stiffener Right
34 2K-Y3240 1 Strain Relief Bushing
35 D5-Z4682 1 Bottom Cover 18MCP
D5-Z5259 1 Bottom Cover 18MCPT
36 D5-Z5235 1 Access Panel
37 2I-Z0057 4 Foot
38 2T-Z0613 1 Thermometer
Part
Number
Per
Unit
Description and Model Designation
IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE 1
INCLUDE MODEL AND SERIAL NUMBER OF 1
Some items are included for illustrative purposes only and in certain instances may not be available.
Star Manufacturing International, Inc.
16
Loading...