Sta-Rite VS-3050 User Manual

IntelliPro® VS-3050

Intelligent Variable Speed Pump

By Sta-Rite

The single most valuable investment
you can make in your pool

®

A monumental advance in

energy efciency,

service life and silent operation

Most pool owners are shocked when they learn
how much a pool pump can cost to operate, because
it isn’t itemized on their electric bill. But, a single­speed or two-speed pump can consume as much
energy as all other home appliances combined—
and often more than $1,000 per year in areas with
the highest energy rates.

IntelliPro
up to 90%, generally saving $620 to $1,360

®

VS-3050 can typically cut energy use by

*

in
utility costs annually—more where rates are higher
than average.

Two technology innovations are
responsible for this remarkable list of performance
improvements.

*Savings based on a comparison pump running between 6 and 12 hours per day at the
national average of $0.15/kWh in a 20,000 gallon pool. Savings may vary based on plumbing
size and length, pump model, service factor, ow rates and other hydraulic factors.

1. Exclusive, advanced motor technology

First, IntelliPro employs exclusive permanent magnet motors
(used in hybrid cars), a fundamentally more energy efficient
design compared to traditional induction motors.

2. Onboard intelligence with variable drive

Second, IntelliPro includes a variable speed capability, along
with digital controls and proprietary software that allow custom
programming of optimum pump speeds for specific tasks—
filtering, heating, cleaning, spa jets, waterfalls, etc. There are
four individual, adjustable speed settings at your command.

For virtually all applications, the optimum speed will be lower
than the pre-set, unchangeable speed of older pumps. Using
slower speeds takes advantage of a fundamental pump law:
slower is far more efficient. The result is up to 90% in savings
compared to even so-called high-efficiency, single-speed and
two-speed pumps.

These combined innovations result in a pump that often uses
just a fraction of the horsepower of standard pumps, reducing
energy use dramatically. While that’s impressive, wait until you
see the savings potential.

The Savings Specifics

Since the cost to operate your pool pump isn’t itemized on your electric bill, you’re probably wondering just how much
an IntelliPro could save. Here are realistic estimates when comparing a traditional energy-eff icient (EE), single-speed
pump to IntelliPro in a 20,000 gallon pool. Savings are calculated using 6 and 12 hours of operation, which represent
common run times.

At $0.15/kWh estimated savings range from $620 to $1,360* per year.

•

At $0.20/kWh estimated savings range from $825 to $1,810* per year.

•

At $0.30/kWh estimated savings range from $1,240 to $2,710* per year.

•

As you can see, the savings with IntelliPro can be dramatic and the return on investment
nearly immediate. Over the long life of the pump your savings can reach thousands of
dollars. And that’s why we (and a growing legion of top pool professionals) say IntelliPro
is simply the most valuable single investment you can make in your pool.

*Savings may vary based on plumbing size and length, pump model, service factor, ow rates and other hydraulic factors.

Estimate Your Savings Online

If these comparisons don’t match up with your local electric rates or pool size, you can estimate your savings
online at www.staritepool.com/calculators. Just click on our Pool Pump Energy Savings Calculator.

A note about utility rates

Posted rates and effective rates are not the same thing. Your base posted electricity rate may be 10¢ per kilowatt
hour (kWh) or less. So why are we star ting our calculations at 15¢ per kWh? We’ve taken into account the many
additional factors that make your effective rate higher:

1. The stated rate is only for electricity used. It does not
include user fees and taxes that vary by state and provider.

2. In some states, rates increase substantially as a consumer
uses additional electricity beyond a set baseline.

3. Many providers assess a surcharge per kWh during the
summer, because demand for electricity is higher.

More Unique

Performance Advantages

The quietest available. The exclusive permanent

magnet motor so critical for energy savings is also a totally

enclosed fan cooled (TEFC) design.
This, combined with running at a
lower speed, is responsible for
IntelliPro being the quietest pump
you can install. At typical speeds you
can barely hear it operating.

A new standard for service life.
IntelliPro’s advanced motor produces

far less heat and vibration than a
traditional induction motor. This means less stress and wear
on pump components. It also eases the strain on other
equipment. IntelliPro also features built-in diagnostics that
protect it from the most common causes of premature pump
failure—overheating, freezing and voltage irregularities.
Combined, these features promise remarkably long, trouble­free service life to further increase your return on investment.

Adjustability maintains efciency as things change.
Because IntelliPro allows you to change pump speeds, you
can add equipment and features or change them without
concern about losing your dramatic energy savings. Just push
a button to set the new, optimum speed to operate with the
lowest energy use.

Vary the sights and sounds of your poolscape.
IntelliPro also gives you the unique ability to alter the
performance of your water features. Add height to deck jets
or fountains. Increase or decrease the ow to waterfalls or a
vanishing edge. Just push a button to adjust as you desire. No
other pump allows you to change your poolside atmosphere.

Adding It All Up

Enjoy tremendous cost savings. Virtually

eliminate pump noise. Achieve greater value

as a result of longer pump life. Change or

add equipment without concern about pump

performance or efficiency. Manage the sights

and sounds of your backyard with your pump.

IntelliPro VS-3050 may sound too good to be true.

But, this revolutionary product is already delivering

all of these unique benefits in thousands of

pools. And that’s why it is, in fact, the single best

investment you can make in your pool.

So sophisticated, it’s simple

Four function buttons to set
speeds for filtration cycles, spas,
water features and more

Speed adjustment buttons – you
or your pool professional dial in
the most efficient speed for
each application

Alarm Status light – a sequence
of blinks alerts you of conditions
that may need attention

Programming IntelliPro

VS-3050 is as easy as setting the

stations on your car radio. With the pump running,
simply press one of the four speed buttons to switch to
the desired speed (factory settings are 750, 1500, 2350
and 3110 RPMs). Then, just press the “up” or “down”
button to increase or decrease the speed setting
between 400 RPMs and 3450 RPMs. It’s that simple to
optimize water ow for any application. Of course, your
pool professional can make a simple calculation to
determine the perfect speed settings. And remember,
as you change or add equipment and features, speed
settings can be quickly adjusted to ensure the lowest
amount of energy is consumed.

Pump Performance Curves

NOTE: The chart above demonstrates performance rates at factory

preset speeds of 750 RPM, 1500 RPM, 2350 RPM and 3110 RPM.
However, ow rates can also be custom programmed between the
ranges of 400 RPM and 3450 RPM as indicated by the green tint.

Automate with Pentair Water Pool and Spa® Control Systems

For even greater convenience with push-button simplicity

Combine an IntelliTouch®, EasyTouch® or SunTouch® control
system with your IntelliPro® VS-3050 to further enhance pool
equipment performance and operating convenience. Now you
can automate and adjust the sights and sounds of your water
features while controlling the operation of all scheduled routines:
filtration, cleaning, pool and landscape lights, spa operation, heating
and more…with the push of a button. No need to memorize
operating sequences, open and close valves, or reset time clocks
and thermostats. It’s all done for you automatically.

Plus, for the ultimate in convenience, indoor, spa-side and wireless
remote control devices are also available. And now new software is

available to control access from your iPad

®

, iPhone® or iPod touch.®*

NOTE: IntelliPro
specically with Pentair Water Pool and Spa® control systems. To
integrate IntelliPro VS-3050 with other manufacturers’ controllers, an
IntelliComm® or an IntelliComm® II control must be purchased
separately and installed properly. See owners manual for details.

* iPad® , iPhone® and iPod touch® are registered trademarks of Apple Inc.

VS-3050 pump has been designed to operate

An Eco Select™ Brand Product

The Eco Select™ brand identifies our “greenest” and most efficient
equipment choices. These products save energy, conserve water,
eliminate noise, or otherwise contribute to a more environmentally
responsible equipment system.

As the global leader in pool and spa
equipment manufacturing, we strive to
provide greener choices to our customers.
We hope you’ll join us in embracing more
eco-friendly poolscapes by choosing
Eco Select branded products for your
swimming pool.

Start Saving Today

Visit www.staritepool.com/calculators and
try our Pool Pump Energy Savings Calculator to
determine how much you can save with IntelliPro
See your pool professional about this and other
innovative and efficient products from Pentair Water
Pool and Spa.

VS-3050.

www.staritepool.com
Phone: [phone]

pumps / filters / heaters / heat pumps / automation / lighting / cleaners / sanitizers / water features / maintenance products

4/11 Part # P1-017 ©2011 Pentair Water Pool and Spa, Inc. All rights reserved.