Sta-Rite P18-1485K User Manual

4" Submersible Motors

PENTEK® XE Series

™

LIGHTNING PROTECTION

Introducing the New PENTEK XE Series 4" submersible highthrust motors. Built with the latest design, manufacturing and testing technology, they feature laser-welded 304L stainless steel construction, higher thrust capacities and higher efficiencies. The PENTEK XE Series submersible motors incorporate “encapsulated, epoxy stator design,” and professional-grade Class F insulation provides longer life in harsh environments. Each motor is 100% factory pressure and run tested to support our quality standards.

APPLICATIONS

■

Water systems… for residential, industrial, commercial, multiple housing and farm clean water use.

SPECIFICATIONS

End Bell – 304 Stainless Steel Shell – 304 Stainless Steel Motor Shaft – 17-4 Precipitation

Hardened Stainless Steel

Insulation – Class F, 311 Max. Water Temp – 86 Fasteners – 304 Stainless Steel Sand Boot – Nitrile Cable – Field-serviceable, Controlled

Compression Design, UL and CSA Approved

Cable Length – 48" Diaphragm – EPDM Thrust Bearings – Kingsbury-type,

pivot shoe, carbon graphite mating ring

Thrust Load Capacity – 700 lbs.

F (155°C)

F (30°C)

FEATURES

700# Rated Kingsbury Thrust Bearing Design – Large high-

performance bearings are standard on all HPs allowing for higher thrust loads, providing many years of trouble-free service under severeduty operation.

2-Wire Permanent Split Capacitor – Design insures quiet

operation and improved operating efficiency.

3-Wire Motors – Operate with PENTEK SMC and other single-phase motor controls.

All Stainless Steel Exterior Professional-Grade Class

F-Compliant Motor Insulation –

Allows for longer service life.

UL, CSA Approved and NSF/ANSI 61 Certified

100% Factory Pressure and Run Tested

Equipped with Surge Arrestor Automatic Thermal Protection

on 1/2 – 1 HP Models

PENTEK® is a registered trademark of Pentair Water. XE Series™ is a trademark of Pentair Water.

Customer Service: (888) 782-7483

Fax Orders: (800) 426-9446 www.sta-rite.com

•

Pentair Water

•

Delavan, WI 53115 USA

•

S6305WS

(5/11)

PENTEK® XE Series

™

4" Submersible Motors

ORDERING INFORMATION

Rating

HP kW Volts Hz

Service

Factor

Catalog Number

Full

Load

Amps

Max. Load

(SF Load)

Amps

Locked

Rotor Amps

PSC 2 Wire

1/2 0.37

3/4 0.55 230 1.5 P42B0007A2 5.0 6.4 24.8 3.0-4.8 12.4 314 22.7 10.3

1 0.75 230 1.4 P42B0010A2 7.9 9.1 21.7 4.2-5.2 13.3 337 24.5 11.1

1-1/2 1.1 230 1.3 P42B0015A2 9.2 11.0 42.0 1.9-2.3 14.9 378 28.9 13.1

115 230 1.6 P42B0005A2 3.7 4.7 19.5 4.5-5.2 11.0 279 19.2 8.7

1.6 P42B0005A1 7.4 9.5 36.4 1.3-1.8

CSIR 3 Wire

1/2 0.37

3/4 0.55 230 1.5 P43B0007A2 7.2 8.3 32.0 2.6-3.6 11.8-13.0 10.8 275 21.4 9.7

1 0.75 230 1.4 P43B0010A2 8.4 9.7 41.2 2.2-3.2 11.3-12.3 11.7 297 23.1 10.5

115 230 1.6 P43B0005A2 5.5 6.3 22.3 4.2-4.9 17.4-18.7 9.7 246 18.1 8.2

1.6 P43B0005A1 11.0 12.6 49.6 0.9-1.6 5.7-7.0

CSCR 3 Wire

1/2 0.37 3/4 0.55 1.5 P43B0007A2 5.1 6.3 32.0 2.6-3.6 11.8-13.0 10.8 275 21.4 9.7

1 0.75 1.4 P43B0010A2 6.1 7.2 41.2 2.2-3.2 11.3-12.3 11.7 297 23.1 10.5

1-1/2 1.1 1.3 P43B0015A2 9.7 11.1 47.8 1.6-2.3 7.9-8.7 13.6 345 27.4 12.4

2 1.5 1.25 P43B0020A2 9.9 12.2 49.4 1.6-2.2 10.8-12.0 3 2.2 1.15 P43B0030A2 14.3 16.5 76.4 1.1-1.4 2.0-2.5 18.3 466 40.0 18.1 5 3.7 1.15 P43B0050A2 24 27 101.0 0.62-0.76 1.36-1.66

230 60

1.6 P43B0005A2 4.1 4.9 22.3 4.2-4.9 17.4-18.7

3 Phase

Rating

HP kW Volts Hz

1/2 0.37

3/4 0.55

1 0.75

1-1/2 1.1

2 1.5

3 2.2

5 3.7

7-1/2 5.6

10 7.5 460 60 1.15 P43B0100A4 15.6 17.2 1.8-2.2 110.0 30.7 780 78 35.4

200 230 P43B0005A3 2.4 2.9 5.72-7.2 17.3 10.0 254 18.9 8.6 460 P43B0005A4 1.3 1.5 23.6-26.1 9 10.0 254 18.9 8.6 200 230 P43B0007A3 3.3 3.9 3.3-4.3 27 10.8 274 21.4 9.7 460 P43B0007A4 1.7 2.0 14.4-16.2 14 10.8 274 21.4 9.7 200 230 P43B0010A3 4.0 4.7 4.1-5.1 26.1 11.7 297 23.1 10.5 460 P43B0010A4 2.2 2.5 17.8-18.8 13.0 11.7 297 23.1 10.5 200 230 P43B0015A3 5.2 6.1 2.8-3.4 32.4 11.7 297 23.1 10.5 460 P43B0015A4 2.8 3.2 12.3-13.1 16.3 11.7 297 23.1 10.5 575 P43B0015A5 2 2.4 19.8-20.6 11.5 11.7 297 23.1 10.5 200 230 P43B0020A3 6.5 7.6 1.8-2.4 44.0 13.8 351 27.4 12.4 460 P43B0020A4 3.3 3.8 8.00-8.67 23.0 13.8 351 27.4 12.4 575 P43B0020A5 2.7 3.3 9.4-9.7 21.4 15.3 389 32 14.5 200 230 P43B0030A3 9.2 10.1 1.3-1.7 58.9 15.3 389 32 14.5 460 P43B0030A4 4.8 5.3 5.9-6.5 30.0 15.3 389 32 14.5 575 P43B0030A5 3.7 4.1 9.4-9.7 21.4 15.3 389 32 14.5 200 230 P43B0050A3 15.7 17.5 0.85-1.25 93.0 21.7 551 55 24.9 460 P43B0050A4 7.6 8.5 3.58-4.00 48.0 21.7 551 55 24.9 575 P43B0050A5 7.0 7.6 3.6-4.2 55.0 27.7 703 70 31.8 200 230 P43B0075A3 24.0 26.4 0.55-0.85 140.0 27.7 703 70 31.8 460 P43B0075A4 12.2 13.5 1.9-2.3 87.0 27.7 703 70 31.8 575 P43B0075A5 9.1 10.0 3.6-4.2 55.0 27.7 703 70 31.8

Factor In. mm Lb. Kg

60 1.6

60 1.5

60 1.4

60 1.3

60 1.25

60 1.15

Service

Catalog Number

P43B0005A8 2.9 3.4 4.1-5.2 22

P43B0007A8 3.8 4.5 2.6-3.0 32.0 10.8 274 21.4 9.7

P43B0010A8 4.6 5.5 3.4-3.9 29.0 11.7 297 23.1 10.5

P43B0015A8 6.3 7.2 1.9-2.5 40.0 11.7 297 23.1 10.5

P43B0020A8 7.5 8.8 1.4-2.0 51.0

P43B0030A8 10.9 12.0 0.9-1.3 71.0 15.3 389 32 14.5

P43B0050A8 18.3 20.2 0.4-0.8 113.0

P43B0075A8 27.0 30.0 0.5-0.6 165.0 27.7 703 70 31.8

NOTE: Amp ratings on 3-wire motors reflect use with CSIR controls. A CSCR control is recommended for lower values.

Full

Load

Amps

Max. Load

(SF Load)

Amps

Line to Line

Resistance Ohms

Winding

Main

Resistance

Rotor Amps

Length Weight

Start

Resistance In. mm Lb. Kg

Thrust Rating

700

900

1500

11.0 279 19.2 8.7

10.0 253 18.9 8.6

9.7 246 18.1 8.2

15.1 383 31.0 14.1

27.7 703 70.0 31.8

Length Weight

Locked

Thrust Rating

10.0 254 18.9 8.6

700

13.8 351 27.4 12.4

900

21.7 551 55 24.9

1500

Customer Service: (888) 782-7483

Fax Orders: (800) 426-9446 www.sta-rite.com

•

Pentair Water

•

Delavan, WI 53115 USA

•

S6305WS

(5/11)

+ 1 hidden pages