Sta-Rite 175 LP Installation Manual

MasterTemp® and Max-E-Therm

®

Pool Heaters

Combustion Chamber (

New Tub Design) Replacement Parts

ADDENDUM

(NON-ASME MODELS ONLY)

IMPORTANT SAFETY INSTRUCTIONS

READ AND FOLLOW ALL INSTRUCTIONS

SAVE THESE INSTRUCTIONS

WARNING

FOR YOUR SAFETY - READ BEFORE OPERATING

This product must be installed and serviced by a professional service technician, qualified in pool heater installation. Some jurisdictions
require that installers be licensed. Check with your local building authority about contractor licensing requirements. Improper installation
and/or operation could create carbon monoxide gas and flue gases which could cause serious injury or death. Improper installation and/
or operation will void the warranty. For additional free copies of these instructions; call [phone].

Combustion
Chamber
Clamp Assy.

X
U
A

D
E

2

E
P
S

W

P
O
L

M

U
P
R
E

T
S
OO

B

D
E
E

X

P
S

U

H

A

G
I
H

1

R
E
T
L
I
F

P

M
PU

Combustion
Chamber
Lid Assy.

MasterTemp

[P/N 474094]

Combustion
Chamber
O-Ring

Combustion
Chamber

(Tub)

[P/N 474095]

Pentair Water Pool and Spa, Inc.

1620 Hawkins Ave., Sanford, NC 27330 • [phone] • [phone]
10951 W. Los Angeles Ave., Moorpark, CA 93021 • [phone] • [phone]

Visit us on the Internet at: www.pentairpool.com or www.staritepool.com

P/N DESCRIPTION

474094 Combustion Chamber Lid Assembly Kit ➊
474095 Combustion Chamber (Tub) Kit ➊

KITS include:

➊ These Combustion Chamber Kits are used for the

Max-E-Therm® heaters manufactured after 1/12/09
and the MasterTemp® heaters manufactured after
1/29/09.

See reverse side for Heat Exchanger Kits.

®

Max-E-Therm

®

New Tub Design KITS

Clamp Assy., O-Ring, and Silicone Tube

Rev. A 4-9-09 1 P/N 474074

HEAT EXCHANGER KITS

P/N DESCRIPTION MODELS

474058 Tube Sheet Coil Assembly Kit (New Tub Design) 175 NA & LP, 200 NA & LP
474059 Tube Sheet Coil Assembly Kit (New Tub Design) 250 NA & LP
474060 Tube Sheet Coil Assembly Kit (New Tub Design) 300 NA & LP, 333 NA & LP
474061 Tube Sheet Coil Assembly Kit (New Tub Design) 400 NA & LP
474062 Tube Sheet Coil Assembly Kit (New Tub Design) 200 (HD) NA & LP
474063 Tube Sheet Coil Assembly Kit (New Tub Design) 250 (HD) NA & LP
474064 Tube Sheet Coil Assembly Kit (New Tub Design) 333 (HD)
474065 Tube Sheet Coil Assembly Kit (New Tub Design) 400 (HD) NA & LP

KITS include:

Clamp Assy., O-Ring, Insulation Kit (Top & Bottom), Silicone Tube

Save These Instructions Together With Your Existing

Operation & Installation Manual For Future Reference.

© 2009 Pentair Water Pool and Spa, Inc. All rights reserved.

This document is subject to change without notice.

1620 Hawkins Ave., Sanford, NC 27330 • [phone] or [phone]
10951 West Los Angeles Ave., Moorpark, CA 93021 • [phone] or [phone]

Trademarks and Disclaimers: Pentair Pool Products

trademarks of Pentair Water Pool and Spa, Inc. and/or its affiliated companies in the United States and/or other counties. Unless noted, names and brands of others
that may be used in this document are not used to indicate an affiliation or endorsement between the proprietors of these names and brands and Pentair Water Pool
and Spa, Inc. Those names and brands may be the trademarks or registered trademarks of those parties or others.

®

, Because reliability matters most®, Sta-Rite®, MasterTemp®, Max-E-Therm® are trademarks and/or registered

P/N 474074 2 Rev. A 4-9-09