Sta-Rite 10DOM05121 User Manual
HIGH-HEAD FILTERED EFFLUENT PUMPS
S5835SES
KEY FEATURES
1/2 HP, 115 Volt, single-phase, 2-wire
n
Superior draw-down capability to 4-1/2” (114mm)
n
vs. 13-1/2” (343mm) on a standard NEMA 4”
n
25% Reduced AMP-draw 9.5 amps vs. 12.7 amps on a
standard NEMA 4”
n
Cooler and quieter operation – eliminates expensive “flowinducer sleeves”
n
UL, CSA Listed
n
Stainless steel and composite construction
n
Patented and proven SignaSeal™ staging
Exclusive STA-RITE dry-run capability
n
Enclosed and self-lubricated Nylatron
n
wear from abrasives
Heavy 7/16” (12mm) positive drive 300 Series stainless steel
n
hexagonal shaft
n
Stainless steel intake screen – allows for .080” solids
n
Powered by STA-RITE motors
®
shaft-bearing resists
ST .E. P. PLu S
D S E R I E S
SPECIFICATIONS
Applications:
Capacities:
Heads:
Motor:
Dry-wound, double ball-bearing, double-seal, thermal
Electrical:
Operations:
Minimum Diameter:
Staging:
Solids:
Power Cord:
Materials of
Construction:
MODEL NUMBER
10DOM05121
20DOM05121
30DOM05121
®
Effluent, Cistern, Aeration, and Irrigation
2 gpm – 35 gpm (7.6 LPM – 132.5 LPM)
75 FT – 225 FT (22.9 M – 68.6 M)
overload protected
115 Volt, 1Ph, 60Hz, 2-wire
Manual model (controls required)
4” (102mm)
(6) - 10 gpm (37.9 LPM); (4) - 20 GPM (75.7 LPM);
(3) - 30 gpm (113.6 LPM)
.080” (2.0mm)
10 FT (3M), 600 Volt, SJOW jacketed, 2-wire with ground
300 grade stainless steel and engineered composites
CAPACITY LITRES PER MINUTE
25
0
300
225
150
TOTAL HEAD IN FEET
75
10 GPM
0 15
CAPACITY GALLONS PER MINUTE
50
20 GPM
100
75
30 GPM
30 45 60
200
80
60
40
TOTAL HEAD IN METERS
20
0
11
Loading...