Stanton SA-3 Owner's Manual

SA-3

PROFESSIONAL DJ MIXER

STANTON MAGNETICS, INC

[e-mail] • [phone]

www.StantonDJ.com

OWNER’S MANUAL

© 2003, Stanton Magnetics, INC

PLEASE READ CAREFULLY BEFORE USE

FAILURE TO FOLLOW THE INSTRUCTIONS PRINTED BELOW MAY VOID WARRANTY

• Follow all security advice printed on your mixer

• When removing the unit's AC plug from the power source, grasp and pull
the plug, NEVER the cord itself!

• Avoid placing your mixer near heat sources, such as power amplifiers.

• When in use, place your mixer on a stable surface, away from vibration.
Always use care when carrying your mixer. Impact, or heavy vibration may
compromise the unit's mechanical integrity. The manufacturer is not
responsible for damage resulting from an impact, or misuse.

• When in use, place your mixer away from sources of hum or noise, such as
transformers, or electric motors.

• To prevent overheating, always provide your mixer with adequate
ventilation air space.

• Avoid stepping on your mixer's AC cord. Repeated compression of the cord
may lead to electrical shorting.

• To avoid damage due to AC voltage peaks, always disconnect your mixer
from the power source during electrical storms. If possible connect mixer to
a surge protector.

• Your mixer contains no user-serviceable parts. The manufacturer is not
responsible for any damage or personal injury resulting from unauthorized
user-servicing or modifications. In addition, the warranty will be void if any
unauthorized service by the user is detected. Always return your mixer to
an authorized Stanton dealer for servicing.

Thank you for making Stanton your first choice in professional DJ mixers.
Our innovative family of mixers have been developed with input from the profes-

sional DJ community, Stanton offers a affordable combination of user-friendly
mixers with functional design, rugged construction, and professional quality fea-
tures which had been previously unavailable.

Stanton and your authorized Stanton dealer are dedicated to your complete sat-
isfaction by offering benchmark service and support throughout the long life of
your Stanton product.

We appreciate your patronage, and look forward to many years of making music
together.

WELCOME! WARRANTY

This unit has been designed and manufactured using quality components.
Therefore, it is warranted to be free from defects in materials (limited as speci-
fied below), and workmanship for a period of twelve (12) months from the origi-
nal purchase date. During this period, all service and parts necessary to repair a
defect will be free of charge. This limited warranty applies to mechanical parts
which are subject to wear and tear as specified:

• Faders specified durability: 15,000 cycles;

• Rotary potentiometer, specified durability: 10,000 cycles;

• Switches, specified durability: 10,000 cycles.

Consequently, the parts listed above are warranted to be free from defects in
materials and workmanship for a period of thirty days (30) days from the original
purchase date.

The included Penny & Giles crossfader carries a twelve (12) month warranty.
For the warranty to be valid, please complete the warranty registration card

attached or fill out the online registration at www

.stantondj.com
Mail completed warranty cards to:
Stanton Magnetics, Inc, 3000 SW 42st • Hollywood, FL 33312