Stanton S-650 MK II User Manual

S-650 MK II

S-650

MK II

TRACK M S FTRACK M S F

S-650 MK II

IMPORTANT TO SAFETY

WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION:

1. Handle the power supply cord carefully
Do not damage or deform the power supply cord. If it is
damaged or deformed, it may cause electric shock or
malfunction when used. When removing from wall
outlet, be sure to remove by holding the plug
attachment and not by pulling the cord.

2. In order to prevent electric shock, do not open the top
cover. If a problem occurs, contact your dealer.

3. Do not place metal objects or spill liquid inside the CD
player. Electric shock or malfunction may result.

Please, record and retain the Model name and serial
number of your set shown on the rating label.
Model No. ___________ Serial No. ___________

CAUTION: TO REDUCE THE
RISK

ELECTRIC SHOCK,

OF

DO NOT REMOVE THE
COVER (OR BACK). THERE

ARE NO SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead
symbol, within an equilateral triangle, is
intended to alert the user to the presence

of uninsulated "dangerous voltage" within
the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.

The exclamation point within an

equilateral triangle is intended to alert the

user to the presence of important

operating and maintenance (servicing)
instructions in the literature accompanying the appliance.

•

FOR U.S.A. & CANADA MODEL ONLY

CAUTION

TO PREVENT ELECTRIC SHOCK DO NOT USE THIS
(POLARIZED) PLUG WITH AN EXTENSION CORD,
RECEPTACLE OR OTHER OUTLET UNLESS THE
BLADES CAN BE FULLY INSERTED TO PREVENT
BLADE EXPOSURE.

NOTE:
This CD player uses the semiconductor laser. To allow
you to enjoy music at a stable operation, it is
recommended to use this in a room of 5ºC 41ºF - 35ºC
95ºF.

DATE LABEL

MONTH YEAR

VOLTAGE LABEL

DATE LABEL

CLASS 1
LASER PRODUCT

LASER KLASSE 1

CLASS 1 LABEL

CAUTION:
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.

THE COMPACT DISC PLAYER SHOULD NOT BE
ADJUSTED OR REPAIRED BY ANYONE EXCEPT
PROPERLY QUALIFIED SERVICE PERSONNEL.

DOUBLE INSULATED - WHEN SERVICING, USE ONLY
IDENTICAL REPLACEMENT PARTS.

NOTE:
This unit may cause interference to radio and television
reception.

•

Line Voltage Selection (for multiple voltage

model only)

 The desired voltage may be set with the

VOLTAGE SELECTOR switch on the
rear panel, using a screwdriver.

115V

 Do not twist the VOLTAGE SELECTOR

switch with excessive force as this may

230V

cause damage.

 If the VOLTAGE SELECTOR switch does not

move smoothly, please contact a qualified
serviceman.

CLASS 1
LASER PRODUCT

LASER KLASSE 1

VOLTAGE SELECTOR SWITCH

1

IMPORTANT SAFETY INSTRUCTIONS

1. Read Instructions – All the safety and operating
instructions should be read before this product is
operated.

2. Retain Instructions － The safety and operating
instructions should be retained for future reference.

3. Heed Warnings － All warnings on the appliance and
in the operating instructions should be adhered to.

4. Follow Instructions － All operating and use
instructions should be followed.

5. Water and Moisture － The appliance should not be
used near water - for example, near a bathtub,
washbowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool, and the like.

6. Carts and Stands － The appliance should be used
only with a cart or stand that is recommended by the
manufacturer.
An appliance and cart combination
should be moved with care. Quick stops,
excessive force, and uneven surfaces
may cause the appliance and cart
combination to overturn.

7. Wall or Ceiling Mounting － The product should be
mounted to a wall or ceiling only as recommended by
the manufacturer.

8. Heat － The appliance should be situated away from
heat sources such as radiators, heat registers, stoves,
or other appliances (including amplifiers) that produce
heat.

9. Power Sources – This product should be operated
only from the type of power source indicated on the
rating label. If you are not sure of the type of power
supply to your home, consult your product dealer or
local power company. For products intended to
operate from battery power, or other sources, refer the
operating instructions.

10. Grounding or Polarization – This product may be
equipped with a polarized alternation-current line plug
(a plug having one blade wider than the other). This
plug will fit into the power outlet only one way. This is
a safety feature. If you are unable to insert the plug
fully into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to replace
your obsolete outlet. Do not defeat the safety purpose
of the polarized plug.

11. Power-Cord Protection－Power-supply cords should
be routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to the cord in correspondence of
plugs, convenience receptacles, and the point where
they exit from the appliance.

12. Cleaning - The appliance should be cleaned only as
recommended by the manufacturer.

Clean by wiping with a cloth slightly damp with water.

Avoid getting water inside the appliance.

13. For AC line powered units - Before returning repaired
unit to user, use an ohm-meter to measure from both
AC plug blades to all exposed metallic parts. The
resistance should be more than 100,000 ohms.

14. Non-use Periods－The power cord of the appliance

should be unplugged from the outlet when left unused
for a long period of time.

15. Object and Liquid Entry－Care should be taken so
that objects do not fall and liquids are not spilled into
the enclosure through openings.

16. Damage Requiring Service－The appliance should be

serviced by qualified service personnel when:

A. The power-supply cord or the plug has been

damaged; or

B. Objects have fallen, or liquid has been spilled into

the appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate

normally or exhibits a marked change in

performance; or
E. The appliance has been dropped, or the enclosure

damaged.

17. Servicing－The user should not attempt any service to
the appliance beyond that described in the operating
instructions. All other servicing should be referred to
qualified service personnel.

18. Ventilation – Slots and openings in the cabinet are
provided for ventilation and to ensure reliable
operation of the product and to protect it from
overheating, and these openings must not be blocked
or covered. The openings should never be blocked by
placing the product on a bed, sofa, rug, or other
similar surface. This product should not be placed in a
built-in installation such as a bookcase or rack unless
proper ventilation is the manufacturer’s instructions
have been adhered to.

19. Attachments – do not use attachments not
recommended by the product manufacturer as they
may cause hazards.

20. Accessories – Do not place this product on an
unstable cart, stand, tripod, bracket, or table. The
product may fall, causing serious injury to a child or
adult, and serious damage to the product. Use only
with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with the
product. Any mounting of the product should follow the
manufacturer’s instructions, and should use a
mounting accessory recommended by the
manufacturer.

21. Lightning – For added protection for this product
during a lightning storm, or when it is left unattended
and unused for long periods of time, unplug it from the
wall outlet and disconnect the antenna or cable
system. This will prevent damage to the product due
to lightning and power-line surges.

22. Replacement Parts – When replacement parts are
required, be sure the service technician has used
replacement parts specified by the manufacturer or
have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric
shock, or other hazards.

23. Safety Check – Upon completion of any service or
repairs to this product, ask the service technician to
perform safety checks to determine that the product is
in proper operating condition.

2

NOTE ON USAGE

˙

Allow for sufficient heat dispersion when installed on a rack.

˙

Handle the power cord carefully.

˙

Hold the plug when unplugging the cord.

˙

Keep the appliance free from moisture, water, and dust.

˙

Unplug the power cord when not using the appliance for long periods of time.

˙

Do not obstruct the ventilation holes. (For units with ventilation holes)

˙

Do not drop foreign objects into the unit.

˙

Do not let insecticides, benzene, and thinner come in contact with the set.

˙

Never disassemble or modify the set in any way.

MAIN FEATURES

1) 20 seconds of anti-shock memory per deck

2) Instant start within 10 msec (sound is produced immediately when the PLAY button is pressed)

3) Seamless loop (uninterrupted loop playback)

4) Auto cue function (-48dB)

5) Real-time cue

6) Pitch range: +/-8%, +/-12%, +/-16%

7) Pitch display

8) Selectable elapsed, remain and total remain time display

9) Single / continuous play

10) Relay play allows consecutive playback during two decks

11) Frame search

12) 4 fast search mode

13) Transport protection

14) S/P DIF digital output

15) 20 programmable tracks

16) Fader start, Fader stop, (back cue), Relay playback.

17) Key correction

NAMES AND FUNCTIONS

Main Unit

(1) POWER

When the POWER switch is pressed, the power turns on.

(2) Disc Holder

Place the discs in the holder. Press the OPEN/CLOSE button to open and close the disc holder.

(3) OPEN/CLOSE

Press it to open and close the disc holder. The control unit also includes OPEN/CLOSE button. The disc holder
cannot be opened during playback, so stop playback before pressing the button.

(Power ON/OFF Switch)

Button

1 2

3

S-650 MK II

2

3