Stanton S-650 Owners manual
TRACK M S F
REMAIN
CONTINU
TRACK M S F
REMAIN
CONTINU
PROFESSIONAL DUAL CD PLAYER
IMPORTANT TO SAFETY
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION:
1. Handle the power supply cord carefully
Do not damage or deform the power supply cord. If it is
damaged or deformed, it may cause electric shock or
malfunction when used. When removing from wall
outlet, be sure to remove by holding the plug
attachment and not by pulling the cord.
2. In order to prevent electric shock, do not open the top
cover. If a problem occurs, contact your dealer.
3. Do not place metal objects or spill liquid inside the CD
player. Electric shock or malfunction may result.
Please, record and retain the Model name and serial
number of your set shown on the rating label.
Model No. ___________ Serial No. ___________
CAUTION: TO REDUCE THE
RISK
ELECTRIC SHOCK,
OF
DO NOT REMOVE THE
COVER (OR BACK). THERE
ARE NO SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead
symbol, within an equilateral triangle, is
intended to alert the user to the presence
of uninsulated "dangerous voltage" within
the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an
equilateral triangle is intended to alert the
user to the presence of important
operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
•
FOR U.S.A. & CANADA MODEL ONLY
CAUTION
TO PREVENT ELECTRIC SHOCK DO NOT USE THIS
(POLARIZED) PLUG WITH AN EXTENSION CORD,
RECEPTACLE OR OTHER OUTLET UNLESS THE
BLADES CAN BE FULLY INSERTED TO PREVENT
BLADE EXPOSURE.
NOTE:
This CD player uses the semiconductor laser. To allow
you to enjoy music at a stable operation, it is
recommended to use this in a room of 5ºC 41ºF - 35ºC
95ºF.
DATE LABEL
MONTH YEAR
VOLTAGE LABEL
CLASS 1
LASER PRODUCT
LASER KLASSE 1
DATE LABEL
CLASS 1 LABEL
CAUTION:
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
THE COMPACT DISC PLAYER SHOULD NOT BE
ADJUSTED OR REPAIRED BY ANYONE EXCEPT
PROPERLY QUALIFIED SERVICE PERSONNEL.
DOUBLE INSULATED - WHEN SERVICING, USE ONLY
IDENTICAL REPLACEMENT PARTS.
NOTE:
This unit may cause interference to radio and television
reception.
•
Line Voltage Selection (for multiple voltage
model only)
The desired voltage may be set with the
VOLTAGE SELECTOR switch on the
rear panel, using a screwdriver.
115V
Do not twist the VOLTAGE SELECTOR
switch with excessive force as this may
230V
cause damage.
If the VOLTAGE SELECTOR switch does not
move smoothly, please contact a qualified
serviceman.
VOLTAGE SELECTOR SWITCH
1
IMPORTANT SAFETY INSTRUCTIONS
1. Read Instructions – All the safety and operating
instructions should be read before this product is
operated.
2. Retain Instructions － The safety and operating
instructions should be retained for future reference.
3. Heed Warnings － All warnings on the appliance and
in the operating instructions should be adhered to.
4. Follow Instructions － All operating and use
instructions should be followed.
5. Water and Moisture － The appliance should not be
used near water - for example, near a bathtub,
washbowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool, and the like.
6. Carts and Stands － The appliance should be used
only with a cart or stand that is recommended by the
manufacturer.
An appliance and cart combination
should be moved with care. Quick stops,
excessive force, and uneven surfaces
may cause the appliance and cart
combination to overturn.
7. Wall or Ceiling Mounting － The product should be
mounted to a wall or ceiling only as recommended by
the manufacturer.
8. Heat － The appliance should be situated away from
heat sources such as radiators, heat registers, stoves,
or other appliances (including amplifiers) that produce
heat.
9. Power Sources – This product should be operated
only from the type of power source indicated on the
rating label. If you are not sure of the type of power
supply to your home, consult your product dealer or
local power company. For products intended to
operate from battery power, or other sources, refer the
operating instructions.
10. Grounding or Polarization – This product may be
equipped with a polarized alternation-current line plug
(a plug having one blade wider than the other). This
plug will fit into the power outlet only one way. This is
a safety feature. If you are unable to insert the plug
fully into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to replace
your obsolete outlet. Do not defeat the safety purpose
of the polarized plug.
11. Power-Cord Protection－Power-supply cords should
be routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to the cord in correspondence of
plugs, convenience receptacles, and the point where
they exit from the appliance.
12. Cleaning - The appliance should be cleaned only as
recommended by the manufacturer.
Clean by wiping with a cloth slightly damp with water.
Avoid getting water inside the appliance.
13. For AC line powered units - Before returning repaired
unit to user, use an ohm-meter to measure from both
AC plug blades to all exposed metallic parts. The
resistance should be more than 100,000 ohms.
14. Non-use Periods－The power cord of the appliance
should be unplugged from the outlet when left unused
for a long period of time.
15. Object and Liquid Entry－Care should be taken so
that objects do not fall and liquids are not spilled into
the enclosure through openings.
16. Damage Requiring Service－The appliance should be
serviced by qualified service personnel when:
A. The power-supply cord or the plug has been
damaged; or
B. Objects have fallen, or liquid has been spilled into
the appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate
normally or exhibits a marked change in
performance; or
E. The appliance has been dropped, or the enclosure
damaged.
17. Servicing－The user should not attempt any service to
the appliance beyond that described in the operating
instructions. All other servicing should be referred to
qualified service personnel.
18. Ventilation – Slots and openings in the cabinet are
provided for ventilation and to ensure reliable
operation of the product and to protect it from
overheating, and these openings must not be blocked
or covered. The openings should never be blocked by
placing the product on a bed, sofa, rug, or other
similar surface. This product should not be placed in a
built-in installation such as a bookcase or rack unless
proper ventilation is the manufacturer’s instructions
have been adhered to.
19. Attachments – do not use attachments not
recommended by the product manufacturer as they
may cause hazards.
20. Accessories – Do not place this product on an
unstable cart, stand, tripod, bracket, or table. The
product may fall, causing serious injury to a child or
adult, and serious damage to the product. Use only
with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with the
product. Any mounting of the product should follow the
manufacturer’s instructions, and should use a
mounting accessory recommended by the
manufacturer.
21. Lightning – For added protection for this product
during a lightning storm, or when it is left unattended
and unused for long periods of time, unplug it from the
wall outlet and disconnect the antenna or cable
system. This will prevent damage to the product due
to lightning and power-line surges.
22. Replacement Parts – When replacement parts are
required, be sure the service technician has used
replacement parts specified by the manufacturer or
have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric
shock, or other hazards.
23. Safety Check – Upon completion of any service or
repairs to this product, ask the service technician to
perform safety checks to determine that the product is
in proper operating condition.
2
NOTE ON USAGE
Allow for sufficient heat dispersion when installed on a rack.
Handle the power cord carefully.
Hold the plug when unplugging the cord.
Keep the appliance free from moisture, water, and dust.
Unplug the power cord when not using the appliance for long periods of time.
Do not obstruct the ventilation holes. (For units with ventilation holes)
Do not drop foreign objects into the unit.
Do not let insecticides, benzene, and thinner come in contact with the set.
Never disassemble or modify the set in any way.
MAIN FEATURES
1) 20 seconds of anti-shock memory per deck
2) Instant start within 10 msec (sound is produced immediately when the PLAY button is pressed)
3) Seamless loop (uninterrupted loop playback)
4) Auto cue function (-48dB)
5) Real-time cue
6) Pitch range: +/-8%, +/-12%, +/-16%
7) Pitch display
8) Selectable elapsed, remain and total remain time display
9) Single / continuous play
10) Relay play allows consecutive playback during two decks
11) Frame search
12) 4 fast search mode
13) Transport protection
14) S/P DIF digital output
15) 20 programmable tracks
16) Fader start, Fader stop, (back cue), Relay playback.
17) Key correction
NAMES AND FUNCTIONS
Main Unit
1 2
3
(1) POWER (Power ON/OFF Switch)
When the POWER switch is pressed, the power turns on.
(2) Disc Holder
Place the discs in the holder. Press the OPEN/CLOSE button to open and close the disc holder.
(3) OPEN/CLOSE Button
Press it to open and close the disc holder. The control unit also includes OPEN/CLOSE button. The disc holder
cannot be opened during playback, so stop playback before pressing the button.
2
3
NAMES AND FUNCTIONS
4 5 6 7 8 4 5 6
(4) REMOTE CONTROL CONNECTOR
Connect this connector to the control unit using the included control cord.
(5) DIGITAL OUT SOCKET
The music-signal of this socket is digital. Connect the output to the respective input of a digital amplifier for example.
(6) AUDIO OUT L and R
The audio signals from each player are output from these jacks.
(7) POWER CORD
(8) VOLTAGE SELECTOR (For Dual Voltage model only)
Set this switch to the voltage for your location.
Control Unit
1 2 34 5 67
8 9
10
REMAIN
TRACK M S F
11 14
15
CONTINU
19
20
12 13
TRACK M S F
16 17 18
REMAIN
CONTINU
21
(1) SHUTTLE (Shuttle Dial)
Use the dial to select the scanning direction and speed. The disc is scanned in the forward direction when the shuttle
dial is turned clockwise from the neutral position, in the reverse direction when the shuttle dial in turned
counterclockwise. There are 4 scan speeds. The further the wheel is turned, the faster the scan speed.
(2) OPEN/CLOSE (Open/Close Button)
Press it to open and close the disc holder. The main unit also includes OPEN/CLOSE buttons. The disc holder cannot
be opened during playback, so stop playback before pressing the button.
(3) TIME (Time Button)
Press this button to switch the time between the elapsed time and remaining time and total remaining time of the disc.
(4) LCD
(5) SGL (Single Button)
Press it to switch the single and continuous play modes. The SINGLE mode is indicated by the SINGLE indicator on
the LCD and continuous mode is indicated by the CONTINUE indicator on the LCD.
(6) PROG (Program Button)
Press the PROGRAM button, the player will enter the program mode and stop the CD playback.
(7) PROGRAM Indicator
The PROGRAM LED lights when program mode is set.
(8) RELOOP
If a seamless Loop has been made, but the CD Player is not actively in Seamless Loop mode, press the RELOOP
button to reactivate the Seamless loop mode. RELOOP will appear in the LCD Display. To exit loop, press the
OUT/EXIT button.
When the LOOP start point is set, the LED flashes.
When in LOOP mode, both LEDs will light up.
(9) PITCH Indicator
When the indicator lights, the pitch adjustment is enabled.
4
Loading...