Stanton S-252 User Manual
S.252
USER MANUAL
IMPORTANT SAFETY INSTRUCTIONS
Read these instructions - All the safety and operating instructions sh-
1.
ould be read before this product is operated.
Keep these instructions - The safety and operating instructions sh-
2.
ould be retained for future reference.
Heed all warnings - All warnings on the appliance and in the operati-
3.
ng instructions should be adhered to.
Follow all instructions - All operating and use instructions should be
4.
followed.
Do not use this apparatus near water - The appliance should not be
5.
used near water or moisture - for example, in a wet basement or
near a swimming pool, and the like.
Clean only with dry cloth.
6.
Do not block any ventilation openings. Install in accordance with the
7.
manufacture s instructions.
Do not install near any heat sources such as radiators, heat registe-
8.
rs,stoves,or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding plug.
9.
A polarized plug has two blades with one wider than the ther. A grounding plug has two blades and a third grounding prong.The wide blade or the third prong is provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for replacement
of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly
10.
at the plugs, convenience receptacles, and at the point where they
exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
11.
Use only with the cart, stand, tripod, bracket,
12.
or table specified by the manufacturer, or
sold with the apparatus. When a cart or rack
is used,use caution when moving the cart/apparatus combination to avoid injury from
tip-over.
Unplug the apparatus during lightning storms or when unused for
13.
long periods of time.
Refer all servicing to qualified personnel. Servicing is required when
14.
the apparatus has been damaged in any way, such as power supply
cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
Caution-To prevent electrical shock, match wide blade plug wide slot
15.
fully insert.
Please keep the unit in a good ventilation environment.
16.
WARNING:To reduce the risk of fire or electric shock, do not expose
17.
this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids,
such as vases, shall not be placed on apparatus.
WARNING: The mains plug or appliance inlet is used as disconect
18.
device, the disconnect device shall remain readily operable.
Power Sources - This product should be operated only from the
19.
type of power source indicated on the rating label.If you are not sure
of the type of power supply to your home, onsult your product dealer
or local power company. For products intended to operate from battery power, or other sources, refer the perating instructions.
Safety Check - Upon completion of any service or repairs to this pr-
20.
oduct, ask the service technician to perform safety checks to determine that the product is in proper operating condition.
Don't touch conductive parts of output terminals to prevent hazard-
21.
ous electrical shock. The external wiring connected to the terminals
requires installation by an instructed person or the used of ready made leads or cords.
This product is in compliance with EU WEEE regulat-
22.
ions. Disposal of end of life produc should not betreated as municipal waste. Please refer to your local
regulations for instructions on proper disposal of this
product.
To prevent hazardous electrical shock, do not touch
23.
the conductive parts of the output terminals.The external wiring connected to the terminals requires installation by an
quallified technician or the use of ready made leads or cords.
24. T his device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditi
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
ons:(1) this device may not cause
25. I nvisible laser radiation when open and interlocks defeated.
Avoid exposure to beam of laser.
CAUTION: To reduce the risk of electric shock, do not remove any
cover. No user-serviceable parts inside. Refer servicing to qualified service personnel only.
The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock.
The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operation and maintenance (servicing) instructions in the literature accompanying this appliance.
CAUTION:
To prevent electric shock, do not use this polarized plug with an extension cord, receptacle or other outlet
unless the blades can be fully inserted to prevent blade exposure.
Line voltage selection (for multiple voltage model only)
1) The desir ed voltage may be s et with the VOLTAGE SELECTOR switch on th e rear panel of the m ain
unit , using a screwdr iver.
2) Do no t twist the VOLTAGE SELECTOR switch with excessive for ce as this may caus e damage.
3) If th e VOLTAGE SELE CTOR s witch does not move s moothly conta ct a qualifited s erviceman.
1
• Allow for sufficient heat dispersion when installed on a rack.
• Handle the power cord carefully.
• Hold the plug when unplugging the cord.
• Keep the set free from moisture, water, and dust.
• Unplug the power cord when not using the set for long periods of time.
• Do not obstruct the ventilation holes. (For sets with ventilation holes.)
• Do not let foreign objects in the set.
• Do not let insecticides, benzene, and thinner come in contact with the set.
• Never disassemble or modify the set in any way.
1) EJECT: Opens the CD door
2) STOP: Stops the CD.
3) SKIP: Skips through the tracks on the CD, forward or
back.
4) : Scans forward or back through the
current track. This unit features 3 scan speeds. Keep
the or button pressed for a few seconds
to change the scan speed.
5) PLAY/PAUSE: Plays or pauses the CD. Autocue func-
tion sets the cue point automatically when this button is
used.
6) CUE: Used to recall and preview the cue point.
7) TIME: LCD display reads the time remaining or time
elapsed, according to this button.
8) PITCH: Turns pitch fader ON and OFF.
9) PITCH SELECT: Pressing the PITCH and PITCH
BEND - (minus) buttons simultaneously changes the
pitch fader range between +/- 8, 12, and 16%.
10) PITCH BEND: Maximum pitch on this unit is 16%. If
the pitch fader is already physically set to 16%, this
function will not work.
: Switches between Single or Continuous
play modes.
11)
SGL/CTN
12) LOOP: Press once to set starting loop point, press
again set ending point and enter loop. Press a third
time to exit loop.
13) LCD DISPLAY: Shows time (minutes, seconds,
frame), and pitch information.
14) PITCH FADER: Used to speed up or slow down current track.
15) AUDIO OUT: This stereo line output connects to the
line input on any DJ mixer.
16) DIGITAL OUTPUT: This coaxial (S/P DIF) digital output connects to any RCA S/P DIF input, as found on
most standard computer sound cards or CD burners.
17)
FADER START
: Connects to any DJ mixer equipped
with a fader start input. This enables the user to start
the CD from the cue point, using the mixer’s cross or
line fader, depending on the mixer.
18)
VOLTAGE SELECTOR
: Used to select the unit’s volt-
age according to the local setting.
Note: The voltage
should preset correctly from the factory, however,
make sure to check it before powering the unit.
19) AC IN
: This is the connection for the supplied power
cable.
20)
POWER
: This button is used to power the unit ON and
OFF.
21)
PHONES: Use this stereo jack to connect a pair
of headphones.
*Just for Dual Voltage model only.
NOTE ON USE
FUNCTIONS
2
Loading...